Table of Contents
If you want to start correctly in 3D printing, you must be equipped with the right equipment. But you do not necessarily have to go overboard and buy one of those advanced 3D printers that cost more than a thousand dollars. It is possible to get a high-quality 3D printer without spending more than $400. In this guide, we show you the Best 3D Printers Under $400, which you can buy now.
You do not have to spend hours searching through dozens of products on the internet – we already did that for you. To be more precise, our guide includes 3D printers priced between $300 and $400. The incredible development in 3D printers is a fitting example of the rapid growth of technology that has become an integral part of our daily lives. The 3D graphics industry has evolved at an astonishing pace, making the concept easily accessible to the masses.
List of the best 3D printers under $400
If you have been tempted to dive deeper into this amazingly amazing creation of technology with one of the Best 3D Printers Under $400, we strongly recommend you to go with any of the printers mentioned below.
JGAurora A5S
If you are looking for a DIY kit with a large build volume and a sleek design, the A5S 3D printer is a good option to consider. It is manufactured by JGAurora and is an updated version of A3. After considering consumer feedback on previous models, the company came up with AS5 that also has power recovery and 2.3-inch full-color touch screen in addition to a large printing area. The printer operates on FDM technology and has one extruder. You can print a structure with a maximum volume of 305 x 305 x 320 mm.
The layer resolution ranges from 0.1 to 0.3 mm. AS5 prints at a speed of 150 mm per second with a nozzle that has a diameter between 0.4 and 1.75 mm. You can easily connect via a USB port. Overall, this is one of the best 3D printers under $400.
JGAURORA Upgraded A5S 3D Printer Pre-Assembled with Metal Frame Large Build Size Heated Bed 305x305x320mm Desktop 3D Printers Filament Sensor (A5S)
Features
- JGAURORA A5S 3d printer is an updated version of A5, printer size: 305*305*320mm (12*12*12.6in), content 250g PLA filament
- Updated:1.Change the connection method use SD card; 2.Mainboard: A5S is self-developed mainboard, high precision and good heat dissipation; 3.A5S adds automatic memory, intelligent warning function; 4.A5S using certified power, cost is three times higher than normal, add one more protection
- Filament Run Out Detection:the machine beeps when filament runs out to remind you to change new filament quickly, if filament run out for 1 hour, will stop heating nozzle, resume after filament re-load
- BDG Heated Platform: Allows you remove prints flexible and keep cleaner,won't need masking tape and glue stickers.
- Fast Assembly: come with three modular, the frame, Y-axis box and the filament rack, less than 30 min to complete the assembling.
Anycubic Photon S
Another 3D printer from Anycubic on our list is the Photon S. The company is known for its FDM 3D printers. It came out with a DLP technology-based printer, Photon S, which also attracted a lot of attention and amused many users. It is an updated version of the Photon. It uses powerful UV rays to cure the layers of synthetic resin. The printer has a print area of 4.5 x 2.5 x 6.4 inches with 10W more power and UV matrix. It is compatible with the Photon Slicer software. You can connect it with a USB cable. Overall, this is one of the best 3D printers under $400.
ANYCUBIC Photon Mono SE Resin 3D Printer, UV LCD SLA 3D Printer Ultra Fast Printing with 6" 2K Mono Screen and WiFi Function, Dual Z-axis Linear Rail, Print Size 5.12"(L) x 3.07"(W) x 6.29"(H)
Features
- 【9.25'' Larger LCD Screen】 ANYCUBIC Photon mono X 6k 3d printer is equipped with a 9.25inch monochrome screen, which is 138% larger than a normal 6-inch screen. The monochromatic screen lasts 4X longer than the RGB LCD screen, and a special replaceable scratch-resistant film is added above the screen to save your maintenance costs.
- 【Achieve Larger Print Volume】 The ANYCUBIC Photon Mono X 6K Resin 3d printer can print up to 9.6 x 7.8 x 4.8 inches (HWD). The large volume can print large-size models or multiple models at one time, effectively improving your work efficiency.
- 【High Precision & High Resolution】 The Photon Mono X 6K LCD screen has a high resolution of 5,760 x 3,600 px and a contrast ratio of over 350, which can fully express the details of the character model's hair, fingers and so on. 40 bright LED lights arranged in a matrix provide intense and uniform exposure in each layer of print, improving print quality and accuracy.
- 【Ultra-Fast Printing】 The max printing speed of ANYCUBIC Photon Mono X 6K 3d printer is 3.15 in/h. With a 6% light transmittance screen, the fastest printing speed of the printer can reach 1s/layer, saving you half of the time than other regular resin 3d printer and reduces costs.
- 【Compatible Resin & Power Adjustment】 The UV lamp power adjustment range is 30%-100%, which can support the use of more types of resin printing materials to meet your more printing needs. In addition, adjusting the light power appropriately can extend the lifespan of both the screen and light significantly.
Monoprice Voxel
Monoprice has built a great reputation among consumers for its reliable 3D printers. One of these is Voxel. It offers a lot to its users. It is similar to FlashForge Finder. It is cube-shaped with a prominent touch screen. It has minimal installation requirements and is easy to use. This makes it more suitable for beginners. The printer has a build volume of 150 x 150 x 150 mm. It uses a nozzle with a diameter of 0.4 mm and prints at a speed of 10 to 100 mm per second. The layer resolution ranges from 0.05 to 0.4 mm. It has a 2.8-inch touch screen for an intuitive user interface. Overall, this is one of the best 3D printers under $400.
Monoprice Voxel 3D Printer - Black/Gray with Removable Heated Build Plate (150 x 150 x 150 mm) Fully Enclosed, Touch Screen, 8Gb and Wi-Fi, Large (133820)
Features
- Quick change nozzle: unlike other 3D printers, which require tools and 20-40 minutes of work to replace the nozzle, The voxel has a quick change nozzle that allows you to change the nozzle in seconds, without the need for tools of any kind
- Heated, flexible, and removable: The removable, flexible build plate makes removing a model A breeze. Simply remove and flex it to dislodge the model. You can easily replace it if it becomes damaged or can swap in a second build plate to start a new print immediately after completion of a project. Additionally, it can be heated to temperatures up to 60°c
- Auto Leveling: the printer ships fully calibrated and ready to print out of the box. If necessary, you can easily adjust the distance between the nozzle and the bed via the touch screen interface.Operating compatibility: Windows XP/Vista/7/8/10, Mac OS X, Linux
- Auto feeding with filament sensor: makes loading filament simple. Insert your filament into the printer’s filament loading Port, then tap ‘load filament’ on the color touchscreen menu. Additionally, a built-in sensor recognizes low filament levels and will pause prints in progress until filament is reloaded
- Please visit Monoprice website and search for 'voxel' Or Type Part number 33820 in the search bar to visit the product page and download the latest software and manual
Monoprice Maker Ultimate
Monoprice was known for its high-quality affordable electronic accessories. Then it entered the 3D printer market. The printer looks quite professional with a black anodized metal frame and lives up to all the company’s claims. It is practical and offers the possibility of adding a cover if needed. The printer has a build volume of 200 x 200 x 115 mm with an exceptional speed of 55 mm per second.
The layer resolution is 20 microns and is compatible with Cura, ReplicatorG, Simplify3D, and Repetier Host. All of these softwares are user-friendly. You can connect the printer with an SD card and USB cable. Overall, this is one of the best 3D printers under $400.
Monoprice Maker Ultimate 2 3D Printer - with (200 x 150 x 150 mm) Heated and Removable Glass Built Plate, Auto Bed Leveling, Internal Lighting & Built-in Filament Detector
$415.80 in stock
Features
- AUTO BED LEVELING: Eliminate the hassles of bed leveling with screws and springs. The built-in inductive sensor can automatically level the print bed, saving you times and aggravation. let makes the print bed absolutely level, ensuring that the first print layers is properly adhere to the build plate. Additionally, each printer is pre-levelled at factory before it ships.
- HEATED AND REMOVABLE GLASS BUILD PLATE: The glass build plate provides the flattest surface possible, ensuring that the first print layers are flawless. The build plate can be heated to 100C, which helps first layer adhesion with materials such as ASA and ABS.
- FILAMENT DETECTOR: With the Ultimate 2, you have no need to worry about running out of filament in the middle of a print. The built-in filament sensor detects when the filament has been consumed and automatically pauses the print, allowing you to load a fresh spool of filament to finish your print. Maximum Power Consumption is 200 watts
- FULLY ENCLOSED: Environmental factors can cause prints to curl, split, or otherwise fail, especially when working with more temperature sensitive filaments. The full enclosure helps maintain internal temperatures, ensuring that drafts, air conditioning, and other environmental factors have no effect on the print.
- INTERNAL LIGHTING: The full enclosure has the negative effect of making it more difficult to see your print, without using a flashlight or other spot lighting. The Ultimate 2 features a row of LED lights inside the enclosure, allowing you to easily monitor your print.
Artillery Sidewinder X1 V4
Artillery launched Sidewinder X1 in 2018. Based on customer reviews, it continues to update and add new features. X1 V4 is its fourth successor. It has a sleek design and a professional look. The printer has a build volume of 300 x 300 x 400 mm with a maximum print speed of 150 mm per second. It offers several advanced features for only $400. Overall, this is one of the best 3D printers under $400.
Artillery Sidewinder X1 3D Printer V4 Newest Model 95% Pre-Assembled 300x300x400mm, Reset Button Dual Z Axis Ultra-Quiet Printing 0.6mm Direct Drive Extruder Filament Runout Detection & Recovery…
Features
- FAST AND PRECISE: The print speed can reach up to 150 mm/s, and with the Direct Drive Extruder, SW-X1 makes high quality print, especially for flexible filament. When it arrives on your doorstep, the Sidewinder X1 comes 95% pre-assembled, which makes installation easy as can be.
- RUNAWAY PROTECTION HEATBED: The printer has a direct drive extruder and a fast heating AC heat bed with built in thermal runaway protection, even if the board or the SSR malfunctioned, the bed won’t heat up endlessly until bad things happen. Additionally, the heated bed can heat up to 80C in 2 minutes and it only takes the 0.4mm nozzle about five minutes to heat up to 110°C. With the Lattice glass smooth headbed surface, it makes all types of filaments can be easily stick on
- MUCH STABLE PRINTING: There are 3 inductive sensor end stop separately set on XYZ axis while those non-touch, high-precision limit switches can automatically calibrate and maintain good stability under high-speed printing. Most importantly, features Synchronized Dual Z System, SW-X1 greatly increase its printing stability, also, the built in branded power supply ensure stable and sufficient power. Spend more time making without having to manually adjust the print bed.
- FILAMENT RUN-OUT+ POWER LOSS DETECTION & RECOVERY: Have you ever tripped over the power cord and lost a long hours print? SW-X1 will save you from the loss of power. When it recover from a power failure, the machine will continue to print. Also, it will automatically pauses your 3D print and notifies you when you've run out of filament, saving you time and money
- QUIET TO USE: With a 300 x 300 x 400 mm build volume, the Sidewinder X1 3D printer has a hushed operating sound even working at fast speeds, thanks to its exclusive ultra-quiet stepper drivers which significantly reduce the noise level. SW-X1 overhauled the motion system on the Z, replacing the leadscrews with a belt-driven system, which not only reduces the noise level but also allows for faster print speeds. Feel free to work on other things while the machine is printing beside you
What To Expect From Best 3D Printers Under $400
Still, confused about what you’ll get from one of the best 3D printers under $400? Here are three quick reasons why you should consider going for one of the best 3D printers under $400 price range:
- Better all-around quality: 3D printers under $400 have a much better print quality than 3D printers in the $200 range. They have better construction and are less prone to printing errors. They have better built-in interfaces (hello, touchscreens) and have better quality control. Most important (at least for beginners and non-techies), they are supported by a better technical support team. Of course, not all points are correct for all products. But generally, you can expect at least two of the above advantages when you buy one of the best 3D printers under 400 dollars.
- More material flexibility: Cheap 3D printers of less than $300 are usually limited to PLA filaments, and the 3D printers that can process other types of filaments as standard are not very common and reliable. In the range of $300 – 400, you are more likely to use 3D printers with heated print beds, and you can reliably process more than one type of filament.
- More product options: Going to the range of one of the best 3d printers under $400 will give you access to a more comprehensive list of products. It is always good to have more options. Most striking is that you will encounter more fully embedded, fully assembled 3D printers.