Compsmag is supported by its audience. When you buy through links on our website, we may earn an affiliate commission fee. Learn more

Best 3D Printers Under $200

Are you shopping for your very first 3D printer? You have two options: go all-in on a $1000 3D printer and hope you do not mess it up or get one of the Best 3D Printers Under $200 and learn the basics step-by-step. If the latter sounds more interesting to you, you are at the right address here. Here we tell you about the best 3d printers under $200 that you can buy right now, ranging from DIY 3D printers to plug-and-play 3D printers.

Best 3D Printers Under $200

3D printing technology has quickly changed the world of fast prototypes and engineering. Every hobbyist, novice engineer dreams of stepping into technology and using it to make their design better and faster. Hopefully, after reading our guide of the Best 3D Printers Under $200, you can now make an informed decision about which cheap 3D printer suits you best.

Monoprice Select Mini V2

For one of the best 3D printers under $200, the Monoprice Select Mini V2 certainly brings a lot to the table, even for the development of some of the more expensive 3D printers on the market. It is designed for use on the desktop and comes in a semi-enclosed profile (partially covered with exposed wallboard and print head). The machine arrives fully assembled. Couple that with the relatively simple initial installation, and you have a 3D printer that allows you to start printing in no time.

Although the interface with button operation seems somewhat outdated in a technological world dominated by touchscreens, the Monoprice Select Mini V2 is still easy to operate. It is beginner-friendly and contains simple settings. Due to the heated construction plate, this 3D printer differs from other products in the same price range. This allows the machine to process other filaments than ABS and PLA. But for consistent results, we recommend staying with these two primary filaments and storing the experiments for when you buy a better capable 3D printer.

Pros:

  • Easy to operate
  • Includes heated build plate
  • Straightforward built-in interface
  • Supports various filaments

Cons:

  • Limited build volume
  • Customer support isn’t the most helpful
  • Manual calibration can be a hassle
Last update was on: September 18, 2020 9:51 am

CoLiDo DIY

3d printers under $200

If you are hungry for more volume, check out the CoLiDo DIY. It is an economical 3D printer that offers a considerably larger volume than our top choice, the Monoprice Select Mini V2. Even more impressive? It is cheaper, for about $20 less. The warning? Well, the product name says everything. The CoLiDo DIY is a DIY 3D printer that you must first assemble manually after unboxing. Therefore, you cannot immediately start printing.

The good news is that the assembly and the first set-up process is not too difficult, even if the manual is not the most detailed document. Expect to invest about 45 minutes to one hour to properly set up the printer and prepare it for use. As soon as you take the CoLiDo DIY into use, everything is smooth from that moment on. It is easy to operate and quickly connects to any compatible computer. Filament loading and unloading are not too complicated, and removing a completed project is a simple process.

In other words, total newcomers will not have too much trouble with operating the machine. In terms of print quality, the CoLiDo DIY will undoubtedly surprise you. It is one of the best 3D printers under 200 dollars that, as it were, protrude above their weight. Print quality is accurate and comes with a level of smoothness that is not often seen in cheap 3D printers.

Pros:

  • Easy to assemble and use
  • Large build volume
  • Low noise level
  • Good print quality
  • Construction is sturdy and stable

Cons:

  • Can only process PLA filaments
  • The instruction manual can be better

XYZprinting da Vinci Mini

The XYZprinting da Vinci Mini is a cheap 3D printer that comes with a relatively large build volume and an automatic calibration function. It is embedded and supports wireless connectivity. In short, it is the wireless version of the da Vinci mini marker. For an entry-level 3D printer, the da Vinci Mini is a decent pick-up. In the beginning, however, it needs a lot of patience. The first installation may take more than one hour, but not because the printer requires intensive physical work (i.e., assembling parts).

But, the problem lies in the worthless manual. It was so poorly done that we wondered why the manufacturer even took the trouble to record it in the first place. Seriously, do not even bother with the manual. Just go online and find videos and tutorials on how to set up the da Vinci Mini. The da Vinci Mini is almost like the da Vinci miniMaker. The print quality is surprisingly good for a cheap 3D printer.

Best 3D Printers Under $500

It is accurate and detailed and is comparable to the print quality of 3D printers that is twice the price. The da Vinci Mini can easily pass for a 3D printer of $ 500. The wireless connection is an excellent extra convenience. Overall, this is one of the best 3D printers under 200 dollars.

Pros:

  • Good print quality
  • Large build volume for a mini 3D printer
  • Easy to use once fully set up
  • Runs fairly quiet
  • Includes auto-calibration

Cons:

  • Crappy instruction manual
  • Requires proprietary filament
  • No heated bed

XYZprinting da Vinci miniMaker

3d printers under $200

The XYZprinting da Vinci miniMaker is a cheap 3D printer intended for educational use. More specifically, it has been made to teach children about the details of 3D printing. But it is also a good starter machine for adults who want to make 3D printing, although the LEGO-like look may be a letdown for some. The da Vinci miniMaker is equipped with a single extruder and is an embedded 3D printer, making it perfectly safe for children.

However, adult supervision is still recommended because children tend to raise their noses where they do not belong. The da Vinci miniMaker is designed with ease of use in mind. It contains an automatic calibration function and arrives in a plug-and-play installation. Going through the initial installation should not take more than an hour, although things could have been more natural if only XYZprinting wanted to write a more detailed manual.

The print quality is excellent. It is not in the same class as 3D printers in the range of $1000. But for a $200 3D printer made for educational use, it exceeds expectations and produces items with accuracy that other low-cost 3D printers make jealous. The generous maximum building volume is also a big plus, so you can accept projects that are not possible with the Monoprice Select Mini V2. And overall, this is one of the best 3d printers under 200 dollars.

Pros:

  • The print quality exceeds expectations
  • Large build volume for a cheap 3D printer
  • Easy to operate once fully set up
  • Includes auto-calibration

Cons:

  • Unhelpful instruction manual
  • Expensive proprietary filaments

Instone Easier Mini

The Instone Easy Mini 3D Printer is a fun little machine designed for children and beginners in 3D printing. It is a standard 3D printer, so do not expect too much in terms of print quality and features. The printer comes fully assembled and is ready for use. In less than 30 minutes, you can already start printing your first project. It is a plug-and-play 3D printer that requires minimal adjustments to get started.

The first installation is simple enough, even if the supplied manual is useless. Lightweight and compact enough for use on a desktop, the Instone Easy mini 3D printer is easy to operate, which is essential for beginners. The included custom software is not too complicated, with simple settings that should be easy enough to understand, even for non-techies. The removable building board also makes it easy to remove finished products.

As far as print quality is concerned, the Instone Easier Mini 3D Printer is not the most impressive, which is not surprising, since it is a cheap 3D printer. The print quality is reasonable. It is good enough to impress children and beginners who print 3D for the first time. The machine runs relatively quietly, which is also a reason why it is one of the best 3D printers under $200.

Pros:

  • Lightweight and compact
  • Includes a starter spool of PLA filament
  • Plug-and-play setup
  • Removable build plate
  • Custom software is beginner-friendly

Cons:

  • Cheap build quality
  • Slow printing speed

Geeetech Pro W

3d printers under $200

The Geeetech Pro W is a Prusa i3 clone. It is an affordable 3D printer that works well as a starter machine for those who want to immerse their toes in the world of 3D printing. Like the CoLiDo DIY, the Geeetech Pro W is a DIY 3D printer that needs to be mounted from top to bottom. The assembly and calibration process can take about an hour or two, depending on how good you are in following instructions and putting things together.

Detailed instructions can be found on the internet, so do not worry about getting lost during the assembly process. The quality of the construction is not the best there is. It is made of wood – yes, wood – instead of metal. But on the other hand, the printer remains stable when you manage to put it together. The machine is stable during printing, which means there are fewer examples of wasted projects.

Speaking of quality, the print quality of the Geeetech Pro W is about what you would expect from a cheap low-cost 3D printer of $ 200. It is not the smoothest or the most detailed, but you can rest assured that the printer is non-functional produces items that should be good enough for beginners and teachers. The large building volume is also nice. This allows you to take on larger, more ambitious projects if you are familiar with the basic principles of 3D printing. Overall, this is one of the best 3d printers under $200.

Pros:

  • Relatively easy to assemble
  • Allows standalone printing via SD Card
  • Stable construction
  • Decent print quality
  • Includes starter spool

Cons:

  • Slow printing speed
  • Wireless connectivity advertised but sold separately

Best 3D Printers Under $1000

Compsmag AU