Compsmag is supported by its audience. When you buy through links on our website, we may earn an affiliate commission fee. Learn more

Best 3D Printers In 2020

Welcome to our list of the Best 3d Printers. In this guide, we have collected the 3D printers that can be purchased for different purposes. From home printers for hobbyists to professional 3D printers, this list has excellent choices for everyone. Because these printers are so different from each other, we have not listed them in any order. Therefore, carefully read our collection to see which 3D printer suits you best. There are small, affordable 3D printers that can sit on your desk, as well as expensive 3D printers that can handle large volumes.

Nobody wants to spend all of its time researching the best 3D printers – not to mention spending a lot of money – so our list of the 3D printers contains clear and concise information about all kinds of 3D printers so that you can find the 3D printer for your needs. Let’s begin!

Best 3D Printers in 2020

Slowly but surely, 3D printers become cheaper, better, and drastically more accessible. In the past, there were only a few models on the market, and most of them were awkward, difficult to use, and prohibitively expensive – but that is no longer the case. Our list of 3D Printers consists of printers that are available in every size, shape, and configuration you would ever want – and they become more affordable every month.

MakerBot Replicator+

The best all-around 3D printer

  • Print technology: Fused Deposition Modeling
  • Camera resolution: 640 x 480
  • Minimum layer resolution: 100 microns
  • Maximum layer resolution: 400 microns
  • Dimensions: 528 x 441 x 410 mm
  • Weight: 50.2 pounds

The MakerBot Replicator+ is the successor to the popular MakerBot Replicator 3D printer, and the new version has made improvements to almost every part of the replicator. This means that the Replicator + is faster and quieter than the previous version while maintaining the excellent design and safety features. This desktop 3D printer is expensive, but offers excellent print quality and uses 1.75 mm polylactic acid (PLA) filament. It is also user-friendly enough for home users and hobbyists to use – as long as your budget can go up to the high asking price. Overall, this is currently the best 3D printer that you can buy right now.

Best 3D Printers Under $500

Pros:

  • Fast print speed
  • Simple to use

Cons:

  • Expensive
Last update was on: October 24, 2020 4:05 am

XYZprinting da Vinci Mini

Best budget 3D printer

  • Print technology: Fused Filament Fabrication
  • Minimum layer resolution: 100 microns
  • Maximum layer resolution: 400 microns
  • Dimensions: 390 x 335 x 360 mm
  • Weight: 22 pounds

If you are looking for a budget 3D printer, then there is no better option than the XYZprinting da Vinci Mini. It remains one of the most affordable ways to get 3D printing, and also the easiest, thanks to an easy-to-use interface. Just because it is a budget model does not mean that it does not produce good results, and the 3D-printed objects it makes are very impressive given the price and size of this 3D printer. Talking about size, the XYZprinting da Vinci Mini is an impressively compact printer that is easy to store in an office or on a desk.

Pros:

  • Low price
  • Easy to use

Cons:

  • Flakey software
  • Design can make removing printed object difficult

Ultimaker 2+

The best professional 3D printer

  • Print technology: Fused Deposition Modeling
  • Minimum layer resolution: 20 microns
  • Maximum layer resolution: 600 microns
  • Dimensions: 342 x 493 x 588 mm
  • Weight: 24.9 pounds

The Ultimaker 2+ is a 3D printer that offers amazing print quality, making it one of the best 3D printers for professional use. It is incredibly reliable when it comes to producing 3D models, and the accuracy of the 3D replications is incredibly impressive. If you need a 3D printer that reliably reproduces many 3D objects accurately, this is a fantastic choice. However, it is expensive, and the fact that it is aimed at professional environments means that it is less beginner-friendly than some other 3D printers here. Home users can better search elsewhere.

Pros:

  • High resolution
  • Supports open-source hardware and software

Cons:

  • Basic interface
  • Very expensive
$2,499.00
in stock
October 24, 2020 4:05 am
Amazon Amazon.com
Last update was on: October 24, 2020 4:05 am

Formlabs Form 2

An excellent enthusiast 3D printer

  • Print technology: Stereolithography
  • Minimum layer resolution: 25 microns
  • Maximum layer resolution: 100 microns
  • Dimensions: 350 x 330 x 520 mm
  • Weight: 28.6 pounds

The Formlabs Form 2 is an excellent 3D printer for enthusiasts who do not mind paying extra to get the very best print quality. It is a beautifully designed 3D printer and can be connected to PCs via USB, Wi-Fi, and Ethernet. It does not have the print reliability of the Ultimaker 2+, but the print quality more than compensates for a few mistakes. Although it is costly.

Pros:

  • Brilliant print quality
  • Great interface

Cons:

  • Not the most reliable
  • Expensive

Check Price

M3D Micro 3D Printer

The best 3D printer for beginners

  • Print technology: Fused Filament Fabrication
  • Minimum layer resolution: 50 microns
  • Maximum layer resolution: 350 microns
  • Dimensions: 185 x 185 x 185 mm |
  • Weight: 2.2 pounds

The M3D Micro 3D printer is an excellent 3D printer for beginners. Thanks to the low price, you do not invest a lot of money if you are not sure whether 3D printing is right for you, while the compact, cube-shaped design can easily place it in your home or office. It looks good and is impressively quiet during use. However, the print quality is not the best, and it is only able to make small models (not surprising considering the small dimensions).

Best 3D Printers Under $1000

Pros:

  • Small in size
  • Cheap

Cons:

  • Slow
  • Not the best print quality
Last update was on: October 24, 2020 4:05 am

FlashForge Creator Pro

A great mid-range 3D printer

  • Print technology: Fused deposition modeling
  • Minimum layer resolution: 100 microns
  • Maximum layer resolution: 500 microns
  • Dimensions: 526 x 360 x 389 mm
  • Weight: 24.3 pounds

The FlashForge Creator Pro is one of the best printers between budget 3D printers and expensive professional models. It is a lot cheaper than pro-models, although it retains the build quality and reliability that you would expect from a professional 3D printer. It is not as cheap as the budget and the beginner’s models in this list, but it offers more accuracy when printing 3D models. However, it is a bit noisy in use.

Pros:

  • Good price
  • Excellent print quality

Cons:

  • A bit loud

LulzBot Mini

Another great 3D printer for beginners

best 3d printers

  • Print technology: Fused deposition modeling
  • Minimum layer resolution: 50 microns
  • Maximum layer resolution: 500 microns
  • Dimensions: 435 mm x 340 mm x 385 mm
  • Weight: 24.9 pounds

If you are looking for a first 3D printer to learn the ropes, the LulzBot Mini is an excellent choice for one of the best 3D printer that will not cost you much. It has a reasonable price and is easy to use, although the printing speed is rather slow. The hardware is open-source, which means it has a flexibility that lacks proprietary hardware because a dedicated community of creators can work together to create add-ons for the printer.

Pros:

  • Very easy to use
  • Open-source

Cons:

  • Slow
  • Noisy
$1,299.00
in stock
October 24, 2020 4:05 am
Amazon Amazon.com
Last update was on: October 24, 2020 4:05 am

CubePro Trio

Best for three-color, three-material printing at an incredible price

best 3d printers

  • Print technology: Fused deposition modeling
  • Minimum layer resolution: 70 microns
  • Maximum layer resolution: 300 microns
  • Dimensions: 578 mm x 591 mm x 578 mm
  • Weight: 90.3 pounds

Most of the home 3D printers are limited to printing in one or two colors, but the CubePro Trio can print three different materials in one session. This can be particularly useful if you want to create a closed mechanism: nylon can be used for the gears, ABS for the edge, and PLA for the support structure, which can then be dissolved with caustic soda. The CubePro is an ideal solution for model builders and engineers who need to make 3D prints with moving parts.

Pros:

  • Good design
  • Easy to use

Cons:

  • Not amazing print quality
  • Expensive to run

Check Price

BeeThe First

One for work and home

best 3d printers

  • Print technology: Fused filament fabrication
  • Minimum layer resolution: 50 microns
  • Maximum layer resolution: 300 microns
  • Dimensions: 400 x 140 x 400 mm
  • Weight: 23.1 pounds

In general, 3D printers are designed as boxes with a purpose, but BeeThe First has created a printer with both print quality and actual design in mind – this is a machine that does not fit in a modern living room. BeeThe First also thought about how and where people want to use their printers – at work, at home, or both – and has implemented a thin design with a handle that makes it easy to transport the printer.

Pros:

  • Lovely design
  • Easy to use

Cons:

  • Low build volume
  • Expensive

Check Price

LulzBot Taz 6

A brilliant update to the formidable Taz

best 3d printers

  • Print technology: Fused Deposition Modeling
  • Minimum layer resolution: 75 microns
  • Maximum layer resolution: 300 microns
  • Dimensions: 660 x 520 x 350 mm
  • Weight: 42.9 pounds

Initially, you can hardly be pushed to see the differences between the Taz 5 and 6; both have a solid open frame construction, large print foot, and ease of use. However, look at the refinements in the design and the improvements in usability, and the upgrades quickly stand out. Features such as the automatic leveling base have evolved from those on the Luzbot Mini and work just as well on this larger scale, and the minor changes in the frame layout and control panel are all welcome. The Taz 6 is a large machine with an impressive print surface of 280 mm x 280 mm x 250 mm, with a nozzle of 0.5 mm capable of a minimum layer height of 75 microns and has a filament of 2.85 mm.

Pros:

  • Fast printing
  • Wide support for materials

Cons:

  • Expensive
  • Not the most reliable
out of stock
October 24, 2020 4:05 am
Amazon Amazon.com
Last update was on: October 24, 2020 4:05 am

Best 3D Printers Comparison Table

3D Printers
Printer NameMinimum layer resolutionMaximum layer resolution
MakerBot Replicator+100 microns400 microns
XYZprinting da Vinci Mini100 microns400 microns
Ultimaker 2+20 microns600 microns
Formlabs Form 225 microns100 microns
M3D Micro 3D Printer50 microns350 microns
FlashForge Creator Pro100 microns500 microns
LulzBot Mini50 microns500 microns
CubePro Trio70 microns300 microns
BeeThe First50 microns300 microns
LulzBot Taz 675 microns300 microns

Compsmag AU