Best CPU Cooler – Improving the performance of your pc is simple. Just open your settings, tweak a few settings, and enjoy a faster pc! Gone are the times when you would buy a new a new pc only to find out that you will have to use the Intel and AMD’s stock fan for the rest of your time spent with them.
When it comes to functionality of your pc, one of the most critical factors is its strength to remove heat from the processor. Weather is an unavoidable byproduct of high clock speeds, but when the temperature produced beats your PC’s capacity to remove it, the motherboard will be forced to throttle your entire device. If you’re experiencing disappointing performance and heat problems, upgrading your CPU’s air cooler is one of the quickest and easiest ways to correct the problem. Today we’re here with the list of Top 5 Best CPU Cooler 2018. Read More: Top 10 Best Gaming Graphics Cards 2018: You Can Buy Right Now
So check out our list of Top 5 Best CPU Cooler 2018 below and let us know what do you think about our list in the comment section below. 🙂
Best CPU Cooler – List
NZXT Kraken X62
It is very safe to say that the at this point NZXT’s fame as a company which heavily focuses on both aesthetics and performance remains unfazed over the years. For those who’ve missed out the original Kraken’s series of coolers mainly because of they were waiting for the something new from the NZXT, the good news is the company has revamped the Kraken lineup; this means that they’re now providing more modern versions of the entire previous Kraken coolers. It’s clean, with just the NZXT logo in the center, and all the finish is a mirror, now while it may seem odd while they turned off, as soon as you switch on your PC, the insides light up, and you get to see this infinity effect on the pump. The Kraken X62 is an excellent cooler from NZXT, it is better looking than the most of the closed-loop liquid coolers available in the market, and provides a lot of performance benefits as well. The one & only things that are keeping this puppy back are the buggy CAM tool, and the little performance benefit over some other, cheaper coolers in the market.
Cooler Master Hyper 212 EVO
You can purchase variants of the Hyper 212, such as a model with two fans, one with an LED, and so on. According to Cooler Master Hyper, the spinning fins mounted within the fan are optimized for high and low speeds ranging between 600 or 2,000 RPM (rotations per minute), which can be managed by the system. The Hyper 212 EVO also comes with the brackets, so you can add the extra fan to the cooler if you want.
Deepcool Gammaxx 400
It’s another “tower” cooler with a heat sink held of aluminum fins, and a single red or blue LED-lit 120mm fan to blow the heat off each aluminum floor. The temperature is brought up into the skyscraper via 4 heat pipes that make direct contact with the processor for complete heat removal. According to the specifications, the fan ranges in speed between 900 & 1,500 RPM. It also has a maximum airflow of 74.34 cubic feet per minute, and a noise level of up to 30dB(A). The complete more cooling measures 154.5 inches high, and ships with extra clips for adding a 2nd fan to the setup, to create a push-pull cooling configuration.
Corsair Hydro Series H115i
The fan radiator used in Hydro Series H115i is a 280 mm which is an integral part of this system. It is a particularly designed radiator having 2 fans. These fans are 2 SP140L high torque 140 mm fans that optimize the efficiency of the cooling device. It also comes with built-in corsair link which can be attached to a USB cable and can be used to download software to control it. By using this device, you’ll manage and check the temperature of the PC according to your needs. Another thing that has been catered for this version is the availability of the mounting kit for fans and the radiator making the job of our users more comfortable.
Noctua NH-U12 S (air)
The last but not the least in our list is Noctua NH-U12 S. It’s a tower-based solution with the single 120mm Focused Flow fan that mounted on the single side to blow away all collected heat. The base contains a copper contact surface, Noctua’s included NT-H1 thermal compound, and 4 heat pipes connecting the bottom to the aluminum fins. The fan does not add an LED. One of the massive selling points is the cooler’s overall thin shape so that it fits within a system with tall memory modules. Another prominent feature is the SecuFirm2 mounting, enabling you to offset the cooler between 3 and 6 millimeters, so you’ve more room for large graphics cards in the top PCI Express slot area.