How to Record Mac’s Audio Out­put Using Audio Hijack

This article is about How to Record Mac’s Audio Out­put Using Audio Hijack. So read this free guide, How to Record Mac’s Audio Out­put Using Audio Hijack step by step. If you have query related to same article you may contact us.

How to Record Mac’s Audio Out­put Using Audio Hijack – Guide

Have you ever wished you could record audio from a web browser, called Skype or video game? Well, guess what, you can, and it’s not that difficult! Rogue Amoeba’s Audio Hijack software lets you record audio from almost any source on your Mac and create custom signal processing chains. Audio Hijack is a module-based program that allows you to link different inputs and outputs. You can add native audio effects to the signal streams that you create or use your own third-party effects.

Recording audio from apps is perhaps one of the most basic of Audio Hijack features; it offers a wide range of routing and audio processing options. I must also mention that this is not a sponsored article; I really think Audio Hijack is one of the best audio routing and recording utilities available.

back to menu ↑

Record the sound of your web browser or any application

Open Audio Hijack and click New Session in the bottom left corner. Then, select the Web Audio or Application Audio template, depending on your purpose. The two are practically interchangeable.

Observation: Audio Hijack’s free trial mode will record up ten minutes of audio before the quality starts to decrease. For audio clips over 10 minutes in length, you can consider purchasing the full version for $ 49.

You now have three settings to customize before starting recording. First, click Application to choose the application you want to record from. Browse your computer to find the application you want and optionally choose to open an application-specific URL in that application next to the start of the recording. For most purposes, this is not necessary.

You can then edit the recording settings. For most people, the standard 256 kbps MP3 should be perfectly adequate. Advanced users can change the bit rate, file type and more. If you’re just trying to record something casually, don’t worry about this part.

Finally, choose your output device and volume. It doesn’t really matter, as you will save the recording anyway. Your computer’s speakers are fine.

Now that you’re ready up, press the red record button when you are ready. See below for how to save and export your recording when you are finished.

back to menu ↑

Record the sound of all system outputs

Sound recording of all system outputs works in almost exactly the same way as the model above. The only difference is that you cannot choose an application to obtain the sound, as Audio Hijack, instead, will only obtain all the audio from your Mac.

Still, play around with the recording and output device settings as needed. Then press Record while the sound is playing to capture it. If sounds from multiple applications are being played, this Audio Hijack model will capture all of them.

back to menu ↑

Optional effects

In the sidebar, you should find some collapsible menus for further customization. You can bring up one or more effects by dragging and dropping them on the path. Just be sure to drag it to the left of the Output Device.

For example, you can drag and customize the Volume effect if you want the recording to be higher or lower. Further down, in Audio Unit Effects, you can drag AUPitch to change the tone of the recording before saving it. Be creative if you wish, but the effects are completely optional.

back to menu ↑

Save and export recording

Audio Hijack essentially turns the output into an input. When you are finished recording, the file will be saved to the Audio Hijack. Click Recordings at the bottom to access it.

To quickly export the file, click on a recording and click Actions. Here, you can edit it, view it in the Finder, or add it to iTunes. Be sure to listen to it on Audio Hijack first or add metadata.

back to menu ↑

Final note

I hope you like the guide How to Record Mac’s Audio Out­put Using Audio Hijack. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.

Compsmag
Logo
Shopping cart