# Fix: ‘Wireless Mouse Not Working’ issue on Mac or Windows **URL:** https://www.compsmag.com/blogs/fix-wireless-mouse-not-working/ **Author:** Ayushi Chauhan **Published:** 2023-06-26 **Updated:** 2023-06-26 **Categories:** Blogs **Reading Time:** 9 min --- In this article we will show you how to Fix 'Wireless [Mouse](https://compsmag.com/best/best-mouse/)Not Working' issue on Mac or Windows. Wires are a bad side effect of [computers](https://compsmag.com/best/computers/). If you look behind a typical desk, you'll see a mess of cords and wires connecting power, printers, and other devices. That doesn't mean you should also have a messy desk. Since wireless devices are getting better all the time, now is a great time to go wireless. Not able to connect your wireless mouse to your [Windows](https://compsmag.com/best/windows-apps/)10 computer? Does it go away after a while? Or is the mouse doing strange things? Hardware problems, settings that aren't set up right, and drivers that aren't working right are just a few of the many things that can stop your wireless mouse from working right. Most portable mice are made up of a few different parts. The mouse itself, which has a battery and a USB-based wireless device. The mouse tells the adapter what to do, and the adapter tells [Windows](https://compsmag.com/best/windows-laptops/)what to do. It is a simple plan that usually works well. If your wireless mouse is giving you trouble, this guide is for you. It tells you how to Fix 'Wireless Mouse Not Working' issue on Mac or Windows and will get you back up and running quickly. ## Common Causes of Wireless Mouse Issues 1. **Interference**: Other wireless devices or objects can cause interference with the signal between the mouse and its receiver, leading to connection problems or lag. 2. **Low Battery**: If the battery level of your wireless mouse is low, it may cause erratic behavior or loss of connection. Make sure to replace or recharge the batteries as needed. 3. **Driver Issues**: Outdated or incompatible mouse drivers can result in malfunctions or limited functionality. It's important to keep your mouse drivers up to date. 4. **Physical Obstacles**: Physical barriers, such as walls or furniture, can weaken the wireless signal and affect the mouse's performance. Try to minimize obstacles between the mouse and its receiver. 5. **Range Limitations**: Wireless mice typically have a limited operating range. If you're too far away from the receiver, the mouse may not work properly. Stay within the recommended range. 6. **USB Port Problems**: Faulty or loose USB ports can cause connectivity issues with the receiver. Ensure that the receiver is securely connected to a functional USB port. ## How to Fix 'Wireless Mouse Not Working' issue on Mac ### Recharge or Replace the Mouse Battery Did you recharge or replace the battery on your mouse recently? A near-depleted battery can prevent your mouse from connecting to your computer. Even if it does connect, you may experience unpredictable cursor behavior. 1. Use a **Magic Mouse 2**. 2. Try recharging it **via** its **Lightning port** for **at least 15 minutes**. 3. Don’t see a **charging port**? **Remove** the **battery compartment cover**. 4. **Replace** the **battery** (or **batteries**) inside. ### Pair the Bluetooth Mouse With Your Mac Again If you use a Magic Mouse or another Bluetooth mouse, take it off your Mac and try pairing it again: 1. Select**System Preferences** from the Apple menu. 2. Choosing **Bluetooth**. 3. Click **Control**on your Bluetooth mouse and **choose** Remove. 4. Choose **Remove**once more. 5. **Turn off** your Bluetooth mouse, **wait a moment**, and then **turn it back on**. 6. Select the **Connect**button to **reconnect** your mouse to your [Mac](https://compsmag.com/best/macbook/). ### Turn Your Mac’s Bluetooth Off and On If you use an Apple Magic Mouse, small problems with Bluetooth can cause it to stop working. The same thing could happen with Bluetooth mice made by a third party. In that case, turning off Bluetooth on your Mac and turning it back on can help. So as to: 1. From the menu bar, open the **Bluetooth state menu**. If you don't see the Bluetooth button, open the button Centre and expand it. 2. Flip the **switch next**to Bluetooth off. 3. Wait a couple of seconds, then**turn it back on.** 4. If your mouse doesn't **connect immediately,** you can choose it from the Bluetooth status menu's Devices section. ### Turn the Mouse’s Power Switch Off and On 1. **Turning** your mouse **off** and **then** **back on** is **another way** to fix a **malfunctioning** device. 2. **Look** for an **On/Off switch**—you can usually find it on the mouse’s **underside**. 3. In the case of **Bluetooth mice** (such as the **Magic Mouse**), you may need to **manually connect** it via the **Bluetooth status menu** after **turning it back on** (as mentioned above). ### Remove and Re-Connect the USB Receiver If you use a normal wireless mouse, try unplugging the USB receiver, restarting your Mac, and then plugging the receiver back in. That could end up fixing problems with the device that came up out of the blue. If you use a USB hub, you should also try plugging the device into a USB port on the Mac itself. This should make sure that the USB device has enough power to work properly. ## How to Fix 'Wireless Mouse Not Working' issue on Windows ### Uninstall the Mouse Drivers and Reinstall Them 1. **Drivers** that are **out of date** or **broken** can also make it hard for your **mouse** and **receiver** to **talk** to each other. **Remove** and **reload** the **mouse drivers** to make sure that's not the case. Our guide to **uninstalling drivers** on **Windows** will show you how to **remove mouse drivers**. 2. After **uninstalling** the **drivers**, **restart Windows**. The next time your **device** **boots**, the **drivers** will be **installed immediately**. But if you'd rather, you can get the **drivers** from the **website** of the **mouse's maker** and **install** them yourself. ### Uninstall Any Recent Windows Updates Microsoft releases new Windows updates regularly. Even though these updates aim to improve your device's security and add new features, they can contain bugs, causing numerous problems for Windows users. If you have updated Windows recently and suspect that your mouse has stopped working since then, you need to uninstall this latest update. f you want to know more information about this Visit [Official Microsoft Website](https://www.microsoft.com/en-in) for further Support. ![Fix: 'Wireless Mouse Not Working' issue on Mac or Windows](https://compsmag.com/wp-content/uploads/2023/06/b-131.jpg) 1. Find the **Settings**app by going to the Start menu and clicking on it. Move to the last choice in the **Settings**app, which is "**Update & Security.**" 2. Click **View update** information on the next screen. 3. At the top of the next screen, the first choice is **"Uninstall updates.**" Just click it. 4. If you're using **Windows 11, go to Settings > Windows Update > Update History** to find the same choice. Choose the choice to remove updates. ### Check for USB Port Issues If your wireless mouse only doesn't work on your main device, it could be because the USB port is broken. So, it is very important to rule out this option. To do this, connect your mouse receiver to a different USB port than it was linked to before. If the mouse receiver was plugged into a USB port on the back of your desktop, plug it into one of the ports on the front. This way, neither the PC case nor anything else will get in the way of the link. Change the USB port, but if that doesn't help, move on to the next step. ### Disable Fast Startup With Windows' Fast Startup tool, users can quickly turn on their devices. It does have some problems, though, and issues with the peripherals could be one of them. If none of these solutions worked, you should turn off this feature. 1. To open **Run**, press **Win + R.** 2. To open the**Control Panel, t**ype control and click **OK**. 3. Click on **Power Options** after going to **System and Security.** 4. Click on **Choose**what the **power**buttons do in the left pane. 5. Next, click the link that says "**Change settings that aren't available right now.**" 6. Check the box next to **Turn on fast startup (**recommended) in the Shutdown settings section to turn on the feature. 7. To turn it off, **uncheck**the box next to Turn on fast starting. 8. To use the changes, click **Save changes.** ### Perform a System Restore You should do a system reset if you think you may have changed some system settings recently or if you can't figure out why your wireless mouse isn't working. A system restore undoes any changes you made to your system and removes any drivers or system updates that caused problems after the last restore point. This usually fixes most problems. If you don't know how to do something, read this guide and follow the steps. But you can only recover your system if you've set up a restore point ahead of time. If not, you don't need to do this. ## Conclusion If your mouse double-clicks, doesn't register your clicks, or does something else wrong when you try to use it, it could be a technology problem. Most mice will start to look worn after about 100,000 clicks. This usually shows up as accidental double-clicks on the main button. If that's the case, you'll have to buy a whole new mouse to fix the problem. ## Questions and Answers --- *End of Article*