# How to Fix Your PC Did Not Start Correctly Error

**URL:** https://www.compsmag.com/blogs/how-to-fix-your-pc-did-not-start-correctly-error/
**Author:** Ayushi Chauhan
**Published:** 2022-12-03
**Updated:** 2022-12-03
**Categories:** Blogs
**Tags:** Blogs Daily, Computer Guides, guiderobert, Guides and Tutorials, guiding12, How To Guide, How To Guides, Originals How to, Software tips and tutorials, Tips, Tricks
**Reading Time:** 4 min

---

As soon as Windows starts up, you might see an error message that says “**Your PC did not start correctly.**” Even though this mistake isn’t serious when it happens once, you should take notice if it happens frequently. This error may be brought on by a recent hardware upgrade, a new or updated driver, or a file system corruption, among other things. If this is the first time you’ve encountered the error, try restarting your computer to see if it happens again.

This issue typically arises when the Boot configuration data (BCD) are altered or corrupted. The bootloader is guided by the BCD to obtain the boot information. Consequently, you can experience this starting problem when it’s broken. This can occasionally cause a Windows restart loop, which makes it challenging to log into the device. Furthermore, when external devices are connected and the system is unable to handle them effectively, this problem also occurs frequently. By altering the boot configurations and employing various system file recovery tools, this startup error can be fixed. We mentioned below are the ways to **Fix Your PC Did Not Start Correctly Error.**

## Ways to Fix Your PC Did Not Start Correctly Error

### Run Startup repair tool

When message “**Your PC did not start properly**” is displayed, select the advanced options.

Then, click on **Startup Repair.**

Tool will **analyze and repair** any problems that may have prevented your PC from loading properly. This process may take some time.

### Try Safe mode

You can try starting your computer in Safe Mode if you absolutely must get access to it. However, your computer will only start up with the bare minimum.

While PC is **booting up**, press the physical power button on your for a few seconds until your PC **reboots**. Interrupt the boot process three times in a row, and you will be greeted by the boot repair screen on the fourth occasion. Then select the advanced options.

Then, click on **Troubleshoot**.

Tab on **Advanced Options.**

On Advanced Options screen, click **Startup Settings.**

Click on **Restart** button to visit the **Startup Settings menu.**

Lastly, p**ress 4 or F4** on your keyboard to restart your PC in Safe Mode.

Once you’re **done** using your PC in Safe Mode, restart your PC to see if it boots normally now.

### Run DISM, and SFC scans

In error screen, **select Advanced Options and click on the Command Prompt** tile.

In **console**, type the following command and press Enter.

> DISM.exe /Online /Cleanup-image /Restorehealth

Once **DISM** scan has scanned and repaired the system image, you can**run the SFC scan** to repair the current configuration. Type the following command in the console and press Enter.

> sfc /scannow

After scan is complete, **type shutdown/r** in the console to restart your PC.

### Repair the Boot Configuration Data

The files used by Windows to boot your PC are contained in the boot configuration data. Naturally, you may have the “Your PC did not start correctly” issue if Windows is unable to access certain files at startup. To fix the Windows Boot Configuration Data, adhere to the methods listed below.

On error screen,**select Advanced options** and then click on **Command Prompt.**

Type command given below and**press Enter.**

> bootrec /rebuildbcd

Type **Y and press Enter** to add them to the boot list. If the above command fails to find any Windows installation files, run the following commands one by one and hit Enter after each one.

> bcdedit /export c:bcdbackupattrib c:bootbcd -h -r -sren c:bootbcd bcd.old

After that, **run** the command.

> bootrec /rebuildbcd

Type**shutdown /r** in the console and hit Enter to **restart** your PC.

## Final Words

That’s it with our article on how to Fix Your PC Did Not Start Correctly Error. When Windows doesn’t load on your computer the first time, it’s not too concerning. When it occurs frequently, it may indicate trouble. Your computer’s screen displaying the message “Your PC did not start successfully” denotes an issue with particular startup configurations and files. This issue might be brought on by a faulty driver or piece of software, a power loss, a virus infection, or file system damage. Errors are simple to fix and prevent from occurring again.

---

*End of Article*