Today, we’ll discuss the Best 3D Printers Under $300 and experience a leap in product quality while still staying in the budget category. If you are serious about 3D printing as a hobby, spending $50-100 more on a better product will go a long way. Here we introduce you to cheap and best 3D printers under $300 – or more accurately, 3D printers priced between $200 and $300 (note: prices are correct at the time of writing). So do not expect super-cheap 3D printers sold for $150, even though they are technically less than $300.
Best 3D Printers Under $300 List
Before making a purchase, make sure you understand what your chosen product brings to the table. It is not fair to expect a budget 3D printer to have the same quality as advanced 3D printers sold for $2000. Hopefully, with our guide to the Best 3D Printers Under $300, we could help you set your expectations to a realistic level. Let us know your thoughts on this list by leaving your comments in the box below.
Monoprice Maker Select V2
If you are looking for an affordable and one of the best 3d printers under $300 that lets you play while learning the ins and outs of 3D printing, the Monoprice Maker Select V2 is for you. It is a reliable entry-level 3D printer that offers excellent value at the table. It is a plug-and-play 3D printer. The printer is already mounted directly out of the box. All you have to do is tighten a few screws, and it is ready for use. In less than 30 minutes, you can start printing some of the test models on the SD card (the package also contains a filament for the starter). For beginners, this hassle-free first installation is a big plus.
The Maker Select V2 contains a generous maximum build volume, although the advertised 7.1-inch vertical space is misleading. In reality, you can print up to about 6 inches due to the hot-end placement. The building board is heated, allowing reliable processing of ABS and other filaments that require higher temperatures to work correctly. Print quality is impressive for a 3D printer sold for less than $300. It is polished and precise, supplemented with reasonably high print speed. But like other 3D printers, the level of detail and the size of the project affect the rate: the more extensive and more detailed, the longer the completion time.
- Extremely easy to assemble
- Includes heated build plate
- Supports standalone printing
- Open for modding
- Large build size
- Great print quality
- No auto-leveling technology
- No touchscreen interface
Monoprice Select Mini V2
Our next pick for the best 3d printers under 300 dollars, we still have a product from Monoprice, one of the most popular brands in the department of 3D economic printers. The Monoprice Select Mini V2 is available in two colors: black and white, with the first giving a more professional look. The Select Mini V2 is fully assembled and can be printed directly from the box. Just go through the first installation, which should take less than 30 minutes, and you’re ready to start. The button-operated built-in interface is easy to use and responds, although it feels rudimentary – a touchscreen interface would have been better.
The Select Mini V2 is light and compact and is designed for use on a PC. It looks great on any desk, and the reasonably silent print operation makes it less distracting while you work on other things. But in return for the compact construction, you get a small construction plate, which limits you to only small, often non-functional items. On the positive side, the building board is heated, which is not standard for a budget 3D printer. In most cases, you need to adjust and install a budget 3D printer with a heated build plate. The heated wallboard means that you can use ABS for printing, although we propose to stick to PLA during the first few weeks as you go through the learning curve.
- Easy to use for beginners
- Compact enough for desktop placement
- Fully assembled right out of the box
- Includes heated build plate
- Sturdy construction
- Small maximum build volume
- Unreliable customer support
- No touchscreen
XYZprinting da Vinci Jr. 1.0
The XYZprinting da Vinci Jr. 1.0 is a fully embedded 3D printer that offers fantastic value for a price that is so low that you may think there is some error in the product listing. The Da Vinci Jr. 1.0 comes in an attractive white-blue casing and comes in a neat package that tells you immediately that the manufacturer cares about his products. It is a plug-and-play 3D printer that requires only a few minutes of calibration before you can start printing. More specifically, you must ensure that the extruder and the print bed have the correct distance between them.
Designed for both home and classroom use, the da Vinci Jr. 1.0 a small built-in interface that is operated with a series of buttons. It is effortless to use. Even the technically challenged will have little trouble managing it. The included software is also easy to learn, although it is not the most comprehensive when it comes to design options. Adding to the ease of use is the addition of two useful functions: the automatic filament system and the quick-turn extruder. The first means that the machine takes care of everything as soon as the filament is charged. With the latter, the extruder can be quickly removed for maintenance (or for replacement of the extruder). Overall, this is one of the best 3D printers under 300 dollars.
- Fully enclosed
- Easy to set up and calibrate
- Low noise level
- Includes auto-feeding filament system
- Extruder removes easily for maintenance
- Requires proprietary filament
- No heated build plate
- Slow printing speed
RepRapGuru DIY Prusa i3 V2
There are two types of people when it comes to buying a 3D starter printer: for those who want a pre-built or fully assembled 3D printer and for those who prefer to build their 3D printer with a do-it-yourself kit. If you belong to the last group, the RepRap Guru DIY Prusa i3 V2 is for you. The set comes in a neatly packed box. Find out what is easy, because all parts and pieces are labeled accordingly. The most challenging thing is to merge everything.
The supplied manual is simple and easy to understand. However, the manual is for the older version of the printer, the V1, so some of the upgrades in the V2 are not included. Expect to spend about 10 hours on assembly and calibration, including watching instructional videos on the internet. If you are good at technical things or have a background in electronics or machines, you can probably complete everything within 6-8 hours. That said, the RepRap Guru DIY Prusa i3 V2 is only recommended for those who like to tinker with machines and do not mind getting their hands dirty.
Once everything is set up, the use of the printer is simple. It is easy to use and can be carried out for days and non-stop with minimal problems. It has a generous build volume, which significantly increases the type of items you can print and has a heated print bed. The last function means that you can print with other materials if you think that PLA is too regular for you. Overall, this is one of the best 3D printers under 300 dollars.
- Generous build size
- Good print quality
- Includes heated print bed
- Supports various filament types
- Capable of untethered printing
- Not recommended for beginners
- Assembly and calibration takes a while
- No main power switch
Anycubic Kossel 3D Printer
The Anycubic Kossel 3D printer is something that we would not recommend to beginners in 3D printing, especially because delta 3D printers are more complicated. It is ideal for hobbyists who already know the basic knowledge of 3D printing and have a lot of patience when working on electronics. Please note that the product included here is the “Pulley” version – the “Linear Plus” version is above $300, making it ineligible for inclusion.
The most striking difference between the two is that the “Pulley” comes with a smaller building space. In terms of performance, the “Linear Plus” has the edge, but not so much. Made in China, the Anycubic Kossel 3D Printer arrives in a well-protected packaging. It is not entirely out of the box, so you have to take some time to put it together. Depending on your experience with 3D printers and electronics in general, the assembly and the first calibration process can last from 3 hours to 10 hours.
Low-end DIY 3D printers are notorious because they have confusing manuals that only make the situation worse. This delta printer from Anycubic is different. The assembly is simple and hassle-free, thanks to the well-written manual. It is easy to understand, thanks to the surprisingly good English texts (remember that the manufacturer is Chinese) and useful images. Overall, this is one of the best 3d printers under $300.
- Outstanding instruction manual
- Supports standalone printing
- Includes starter filament
- Great print quality
- Excellent customer support
- Build size smaller than advertised
- Not ideal for beginners
- Manual bed leveling can be a pain
Similar to the RepRap Guru DIY Prusa i3 V2, the Jgaurora A-3 is a do-it-yourself 3D printer that arrives disassembled and takes hours of manual labor to make it into use. The two machines share many similarities, which is not surprising, as both are based on the original Prusa i3. The most striking difference is that RepRap Guru is based in the US, while Jgaurora is based in China. Before the assembly and calibration process, ensure that you reserve at least 8 hours.
The less experience you have with electronics and machines, the more hours you need. To guide you through the process, Jgaurora offers you a series of instructions in both written form and video form. Everything you need to know about how to put the printer together can be found on the SD card. However, because the product is Chinese, the instructions can be challenging to follow because of the level of English, which is understandable.
All in all, the assembly and initial calibration process takes about 8-12 hours, depending on your experience with electronics and the ability to follow instructions that are communicated in less strong than English. About print quality and machine performance, the Jgaurora A-3 will surprise you. It is accurate, works relatively quietly for an open-structured 3D printer, supports different filament types, and can continue for weeks with little or no problems. It is undoubtedly a reliable workhorse that you can rely on for mass prints. Overall, this is one of the best 3D printers under $300.
- Sturdy and stable construction
- Low noise level
- Supports standalone printing via SD
- Top-notch customer service
- Easy to use built-in interface
- Intimidating assembly and initial calibration process
- Instruction manual and videos can be confusing
- No auto-leveling technology
Things To Know Before Buying Best 3D Printers Under $300
- Build quality: The best 3D printers under $300 are often made of firmer and more solid materials, with products such as the Jgaurora A-3, even with a full metal frame for improved durability. Of course, regular maintenance and use play a significant role in the way your 3D printer lasts for a long time. Yet it is nice to have a machine that has already been built to print for hundreds of hours without showing signs of falling apart.
- Size: As far as the maximum size is concerned, the best 3d printers under 300 dollars do not differ from their cheaper relatives. Everything still depends on the type of 3D printer. For example, you can make pretty much self-adhesive DIY Prusa i3 clones for a build volume of at least 7 x 7 x 7 inches. On the other hand, embedded 3D printers and mini-3D printers still have small to medium-sized print beds.
- Heated print bed: Speaking of print beds, the best 3d printers under $300 are more likely to have heated print beds. This means that you can experiment with different types of filaments, including ABS and TPU. Almost all the products we have mentioned here are equipped with heated printing beds, so we have already covered you with them.
- Print quality: In terms of print quality, the difference is not particularly dramatic, although it depends on the products you compare. The Monoprice Maker Select V2, for example, guarantees significantly better results than the HopeWant Desktop 3D Printer, which is sold for about $150.
Best 3D Printers Under $300 Comparison Table
3D Printers Under $300 Printer Name Connectivity Weight Monoprice Maker Select V2 USB, SD Card 22 lb Monoprice Select Mini V2 USB, SD Card 9.9 lb XYZprinting da Vinci Jr. 1.0 USB, SD Card 26.5 lb RepRap Guru DIY Prusa i3 V2 USB, SD Card 12 lb Anycubic Kossel 3D Printer USB, SD Card 12.8 lb Jgaurora A-3 USB, SD Card 22 lb