Table of Contents
Our guide to the best 3D printers filaments can help with that. Because of this, we can tell you about the best 3D printers that cost anywhere from a few hundred dollars to four figures because they have so many features. The end result is a list of the best 3D printers for every budget.
Without knowing about the different types of best 3D printers filaments, the results can be disappointing. We’re going to take a close look at the pros and cons of each type of 3D filament and tell you which ones we think are best for a wide range of projects.
Nothing is worse than carefully and painstakingly 3D printing a miniature, model, or part, only to find out that you used the wrong filament and the one you did use is not good enough. The best 3D printers filaments that you can look through to see if any of them appeal to you.
Best 3D Printers Filaments Comparison Table
Filament | Features | Platform | Dimension | Width | Price (approx.) | Official Website |
---|---|---|---|---|---|---|
LOCYFENS Rainbow | Multicolor, high accuracy printing, low warping | FDM 3D Printers | 1.75 mm | 1 kg | $22.99 | Visit Website |
Sunlu PLA | Low warping, odorless, eco-friendly, high purity | FDM 3D Printers | 1.75 mm | 1 kg | $19.99 | Visit Website |
ABS 3D Printer Filament | Durable, high strength, heat-resistant, flexible | FDM 3D Printers | 1.75 mm | 1 kg | $20.99 | Visit Website |
Overture PLA 3D Filament | Easy to print, eco-friendly, low warping, biodegradable | FDM 3D Printers | 1.75 mm | 1 kg | $23.99 | Visit Website |
Hatchbox PLA 3D Printer Filament | Easy to print, eco-friendly, low warping, biodegradable | FDM 3D Printers | 1.75 mm | 1 kg | $22.99 | Visit Website |
XYZ da Vinci Nano | Compact, easy to use, WiFi connectivity, auto-calibration | FDM 3D Printers | 1.75 mm | 0.6 kg | $209.95 | Visit Website |
iSANMATE 3D Printer Filament | High strength, low shrinkage, eco-friendly, low odor | FDM 3D Printers | 1.75 mm | 1 kg | $22.99 | Visit Website |
LOCYFENS Rainbow
Specification | |
---|---|
Material | PLA |
Diameter | 1.75mm |
Weight | 1kg |
Color | Rainbow |
Print Temperature | 190-220°C |
Bed Temperature | 0-60°C |
Depending on which version you buy, this set of glittering rainbow PLAs makes prints that move through 3 to 5 colors in a very exciting way. The best 3D printers filaments, non-abrasive addition makes layer lines disappear, which makes for very clean prints.
There are about 15 meters between each color. Before getting to the third color on a spool of blue, purple, and green, this Crystal Dragon used more than 56 meters of thread. Locyfens uses clear plastic spools.
The Good
- Unique rainbow color scheme
- PLA material of high quality
- Printing at a wide range of temperatures
- Comes with a guarantee that you’ll be happy with it.
The Bad
- Some users may want more traditional filaments with only one color.
- Compared to some other filaments, the range of bed temperature is small.
Sunlu PLA
Specification | |
---|---|
Material | PLA |
Diameter | 1.75mm |
Weight | 1kg |
Color | Various |
Print Temperature | 190-220°C |
Bed Temperature | 0-60°C |
Sunlu is one of those filaments that is easy to get and always works well when printing. It says its accuracy is +/- 0.02mm, but I’ve never had a difference greater than 0.01mm when I’ve used it.
Sunlu also comes in some lovely matte colors that are a nice change from the usual shiny filaments. It’s easy to sand and print with. If you are new to best 3D printers filaments and need more PLA, this is an inexpensive way to get it.
The Good
- There are many colors to choose from.
- Consistent size for printing that goes smoothly
- Low smell when it was printed
- Affordable price point
The Bad
- Maybe not as strong as other filaments
- Only works with printers that can print PLA.
ABS 3D Printer Filament
Specification | |
---|---|
Material | ABS |
Diameter | 1.75mm |
Weight | 1kg |
Color | Various |
Print Temperature | 220-250°C |
Bed Temperature | 80-110°C |
This PRILINE carbon fiber polycarbonate version is the way to go if you want a strong and stiff best 3D printers filaments. This product has excellent layer adhesion and dimensional stability. It also has a high strength-to-weight ratio and a high heat tolerance.
It’s the best carbon fiber PETG filament according to Amazon, and one of the many happy customers said, “These carbon fiber filaments make parts that look much more professional.” Another benefit is that “there is little or no stringing.”
The Good
- Material that is strong and can last
- Resistant to heat for high-temperature uses
- Good for printing shapes and structures with a lot of detail
- It comes in many colors.
The Bad
- Can give off fumes when printing, which may need to be aired out.
- May need a heated bed for a good hold.
- PLA can be harder to print with.
Overture PLA 3D Filament
Specification | |
---|---|
Material | PLA |
Diameter | 1.75mm |
Weight | 1kg |
Color | Various |
Print Temperature | 190-220°C |
Bed Temperature | 0-60°C |
Overture PLA best 3D printers filaments is another popular option, especially among people who like to make things for fun. It is easy to set up and use because it has a patented formula that keeps it from getting clogged.
Its accuracy in terms of size is 0.03mm, which is a bit of an industry standard. Not everyone likes the cardboard spool, and some people say it can cause drags or snatches when printing, but these are rare complaints.
The Good
- PLA material of high quality
- Consistent size for printing that goes smoothly
- Low smell when it was printed
- It comes with a spool that can be used again and a vacuum-sealed package.
The Bad
- Only works with printers that can print PLA.
- Some users may prefer more unique color options
Hatchbox PLA 3D Printer Filament
Specification | |
---|---|
Material | PLA |
Diameter | 1.75mm |
Weight | 1kg |
Color | Various |
Print Temperature | 180-210°C |
Bed Temperature | 0-60°C |
If you want PLA filament, the best brand to buy is Hatchbox. Even though it’s one of the best 3D printers filaments on the market, the quality is surprisingly good, making it a great deal.
The colors available are nice and bright. Its accuracy in terms of size is +/- 0.03 mm, which is very good. It also has great layer adhesion, less warping, and less clogging of the nozzle.
The Good
- Consistent size for printing that goes smoothly
- Affordable price point
- It comes in many colors.
- Low smell when it was printed
The Bad
- Some users may prefer more unique color options
- Can be hard and likely to break
XYZ da Vinci Nano
Specification | |
---|---|
Material | PLA |
Diameter | 1.75mm |
Weight | 600g |
Color | Various |
Print Temperature | 190-210°C |
Bed Temperature | Not specified |
If you can’t find the Monoprice Voxel or can’t afford it, the da Vinci Nano from XYZprinting may be your best low-cost option, especially since the printer seems to be back in stock. The da Vinci is about the size of a bread machine, but it has a large build area of 4.7 inches on all sides for its size.
There is a door to close off the printing area and block out some of the noise, but be aware that opening the door doesn’t stop the printing process. Other best 3D printers filaments can make things much faster than the da Vinci Nano.
The Good
- Small and easy to carry
- Setup and use are simple.
- Includes a bed that doesn’t need to be heated.
- The XYZmaker software makes it easy to print.
The Bad
- Limited print volume due to small size
- Only works with XYZ-branded filament cartridges
iSANMATE 3D Printer Filament
Specification | |
---|---|
Material | PLA |
Diameter | 1.75mm |
Weight | 1kg |
Color | Various |
Print Temperature | 190-220°C |
Bed Temperature | 0-60°C |
If you can’t find the Monoprice Voxel or can’t afford it, the da Vinci Nano from XYZprinting may be your best low-cost option, especially since the printer seems to be back in stock. The da Vinci is about the size of a bread machine.
But it has a large build area of 4.7 inches on all sides for its size. There is best 3D printers filaments door to close off the printing area and block out some of the noise, but be aware that opening the door doesn’t stop the printing process.
The Good
- PLA material of high quality
- Consistent size for printing that goes smoothly
- Low smell when it was printed
- Printing at a wide range of temperatures
- Comes in a package that is vacuum-sealed to keep out moisture
The Bad
- Only works with printers that can print PLA.
- Some users may prefer more unique color options
FAQs
What is the best type of filament for 3D printing?
When it comes to 3D printing for home use, polylactic acid (PLA) is king. PLA is by far the most popular type of 3D printer filament, and for good reason. It’s often compared to ABS, which is arguably the next best choice.
What is a better type of thread than PLA?
PETG is more durable and stronger than PLA. On the other hand, PLA is used a lot as an FDM/FFF filament because it melts and cools better. When it comes to price, PETG costs more than PLA.
Can a 3D printer work without material?
No longer will a print fail if you run out of filament. If you run out of filament, the printer will automatically stop printing, unload the last few centimeters of material from the heatbreak, and move the X-carriage away from the print.