Compsmag is supported by its audience. When you buy through links on our website, we may earn an affiliate commission fee. Learn more

Best 3D Printers Under $400

If you want to start correctly in 3D printing, you must be equipped with the right equipment. But you do not necessarily have to go overboard and buy one of those advanced 3D printers that cost more than a thousand dollars. It is possible to get a high-quality 3D printer without spending more than $400. In this guide, we show you the Best 3D Printers Under $400, which you can buy now. You do not have to spend hours searching through dozens of products on the internet – we already did that for you. To be more precise, our guide includes 3D printers priced between $300 and $400.

Best 3D Printers Under $400 List

The incredible development in 3D printers is a fitting example of the rapid growth of technology that has become an integral part of our daily lives. The 3D graphics industry has evolved at an astonishing pace, making the concept easily accessible to the masses. If you have been tempted to dive deeper into this amazingly amazing creation of technology with one of the Best 3D Printers Under $400, we strongly recommend you to go with any of the printers mentioned above.

FlashForge Finder

If you want the total package, you do not have to look any further than the FlashForge Finder. It is a beautiful machine that works extremely well for educators, hobbyists, and casuals. The Finder is an embedded 3D printer, protected by a sturdy and stable housing that never gets in the way while the machine is working. The attached profile means that children can use it safely, both in the classroom and at home.

Yet it is wise not to leave children alone with the machine because children are sometimes too curious for their excellent. Designed for immediate use, the Finder requires very few adjustments at the beginning. It is a plug-and-play 3D printer that allows you to print objects within 30 minutes. It is easy to calibrate, which is a godsend for beginners and non-techies, and comes with a starting wire.

However, the filament of the starter motor is not the most generous. Do not forget to pick up a coil with a filament for checkout. At the top of the machine, you will find a small, touch-sensitive interface. It is responsive and easy to navigate, thanks to simple and user-friendly options. We love FlashForge with a touch screen interface instead of a rudimentary control with a button, which is common in budget 3D printers.

The print quality is outstanding, especially considering the price. The printed items are smooth, rich in detail, and can quickly be passed on as products from a more expensive 3D printer. Overall, this is one of the best 3D printers under $400.

Pros:

  • Plug-and-play
  • Sturdy and stable construction
  • Includes wireless connectivity
  • User-friendly touchscreen interface
  • Slide-in print bed
  • Low noise level

Cons:

  • Can only process PLA filament
  • No heated build plate
  • Limited build size
Last update was on: November 29, 2020 12:10 pm

The Micro by M3D

best 3D printers under $400

Say hello to one of the best 3D printers under 400 dollars available on the market. The Micro by M3D is a compact 3D printer that, almost comically, does the job better than some products in the price range of $500-600. It is a small workhorse that you can rely on too small print items. The Micro is available in different colors, including black, orange, and green.

It is light enough for easy transport. It does not take up too much space on a desk and never looks next to other office or school items. It seems more like a piece of furniture than on a machine. Like the FlashForge Finder, the Micro is a simple 3D printer that works out of the box with minimal adjustments. Both initial software settings and hardware calibration are problem-free and require only a few minutes of your time. Even people with little experience with electronics will have no problems getting the Micro into operational status.

Unlike other mini-3D printers, the Micro does not have an external spool holder, which is often located on the side. Instead, the coil holder is integrated into the printer. He is under the box bed – yes, you read that correctly – which contributes to the minimalistic profile of the printer. In terms of performance, the Micro is a mixed bag. On the one hand, the print quality is surprisingly good. It can produce very detailed items with little to no problems.

Pros:

  • Plug-and-play
  • Easy to calibrate
  • Good print quality
  • Relatively quiet
  • Sleek, minimalist design
  • A cool internal spool holder

Cons:

  • Tiny build size
  • No heated print bed
  • Slow printing speed
Last update was on: November 29, 2020 12:10 pm

Geeetech MeCreator 2

For one of the best 3D printers under 400 dollars that offers the right balance between quality and price, view the Geeetech MeCreator 2. It’s a robust 3D printer that comes fully assembled, just like our other top choices, the FlashForge Finder and the Micro. The MeCreator 2 requires only minor adjustments before you can start printing your first item. Going through the initial software configuration is simple, and operating the printer is simple. If you already have experience with 3D printers, the first installation should be a piece of cake for you.

Best 3D Printers Under $500

The build quality is impressive. The printer is packed in a sturdy metal frame, giving it a clean and professional appearance, although it is not entirely enclosed, because the sides are uncovered. It contains a small LCD interface, which is operated with a button. Mainly used for stand-alone printing via the SD card, the LCD interface is responsive and easy to operate.

In contrast to the FlashForge Finder and the Micro, this 3D printer contains a heated bed with print, one of the main reasons why we choose “Best Price.” With the heated print bed, you can print items with ABS filament and achieve excellent results, provided you have the patience to tinker with the settings.

Pros:

  • Arrives fully assembled
  • Easy to set up and configure
  • Great print quality
  • Supports stand-alone printing
  • User-friendly LCD interface
  • Includes heated print bed

Cons:

  • Noisy fan
  • Stingy sample filament
  • Prone to shipping issues

XYZprinting da Vinci Jr. 1.0 Pro

best 3D printers under $400

If you want a 3D printer from XYZprinting but do not want to use brand filaments, then the XYZprinting da Vinci Jr. 1.0 Pro something for you. It is the professional version of the da Vinci Jr. 1.0, one of the best 3D printers under $300. Unlike other budget 3D printers from XYZprinting, the da Vinci Jr. accepts 1.0 Pro filaments from external companies, which means that you can significantly reduce your expenses.

It contains a gate for third-party filaments at the back, so you can enjoy the open filament system without modding. However, it does not have a spool holder for third-party wires, so we recommend that you print one for your first project. Since the da Vinci Jr. 1.0 Pro is limited to PLA, you can not experiment with other types of materials from external companies. It is also worth noting that XYZprinting does not recognize your warranty if you experience problems caused by filaments from third parties.

The da Vinci Jr. 1.0 Pro is a fully enclosed 3D printer that arrives assembled. It is a plug-and-play 3D printer that only needs a few minutes for the initial software setting. It has an automatic bed leveling system, which means that you no longer have to go through the problematic manual bed leveling process. It also comes with an automated loading filament system. Overall, this is one of the best 3D printers under $400.

Pros:

  • Plug-and-play
  • Fantastic print quality
  • Supports third-party filaments
  • Fully enclosed
  • Relatively quiet while printing
  • Includes auto bed leveling system

Cons:

  • No heated print bed
  • Limited to PLA filaments
  • No spool holder for third-party filaments
Last update was on: November 29, 2020 12:10 pm

Monoprice Maker Select Plus

The Maker Select Plus is a small upgrade from the Maker Select V2. It has several adjustments in the design, which gives it a more modern and attractive appearance. Like the Maker Select V2, the Maker Select Plus arrives assembled. All you have to do is tighten a few screws to keep the frame in place, and you are ready to roll. Everything you need to start printing right away is included in the package – including a starting wire, a few test models on the SD card, and a bobbin holder.

You can go from unboxing to printing in less than 30 minutes, but do not expect excellent print quality on your first attempt. The most striking upgrade comes in the form of the built-in LCD touch screen. It is not housed in a separate control cabinet, such as the obsolete button-operated interface of the Maker Select V2. This means that the Maker Select Plus is more compact and leaves a smaller footprint on your desk. The LCD touch screen is located at the base and responds quickly and contains all the necessary options you need to operate the machine.

The interface also includes a pause option, which is very useful if you prefer not to let your printer work while you are away from home. However, the Resume Interrupt option only works when the printer is on or connected. If you pause the printer and then turn it off, you will lose your print progress. This also means that you are forced to start all over again in the event of a power outage. But still, this is one of the best 3D printers under $400.

Pros:

  • Includes LCD touchscreen
  • Large build size
  • More compact than Maker Select V2
  • Supports various filament types
  • Features heated print bed
  • Easy to modify

Cons:

  • No auto bed leveling feature
  • Not enclosed
  • Instruction manual needs improvement
Last update was on: November 29, 2020 12:10 pm

Qidi Tech X-One 2

best 3D printers under $400

The Qidi Tech X-One 2 is one of the most robust and one of the best 3D printers under 400 dollars. It is built like a tank and can easily brush away hundreds of hours of printing as if it were nothing. If you are on the market for a long-term 3D printer that lasts for years, then the X-One 2 is for you. Before we go into the technical details, we want to point out that Qidi Tech offers one of the best customer services in the company.

From timely e-mail responses to fast delivery of replacement parts, it is clear that the company strives to ensure that every customer is satisfied with his or her purchase. So do not worry if you run into problems, especially during initial installation – Qidi Tech has your back. Now let’s continue with the machine itself. Just like other non-DIY 3D printers, the X-One 2 comes assembled. Install all remaining parts that need only a few minutes, configure the software, load the filament, and you are ready to print.

All in all, the first installation – including the bed leveling process – should last about one hour, perhaps less if you are good with electronics. Designed for both children and adults, the X-One 2 is extremely easy to use. It contains a simple and responsive touchscreen interface and comes with user-friendly software. It is fully enclosed, unlike the X-One, and features a heated print bed that is required when playing with ABS.

Pros:

  • Fully enclosed
  • Includes heated print bed
  • User-friendly touchscreen interface
  • Top-notch customer support
  • Sturdy and stable construction
  • Includes internal lights

Cons:

  • Loud fan
  • Limited build space
Last update was on: November 29, 2020 12:10 pm

What To Expect From Best 3D Printers Under $400

Still, confused about what you’ll get from one of the best 3D printers under $400? Here are three quick reasons why you should consider going for one of the best 3D printers under $400 price range:

  • Better all-around quality: 3D printers under $400 have a much better print quality than 3D printers in the $200 range. They have better construction and are less prone to printing errors. They have better built-in interfaces (hello, touchscreens) and have better quality control. Most important (at least for beginners and non-techies), they are supported by a better technical support team. Of course, not all points are correct for all products. But generally, you can expect at least two of the above advantages when you buy one of the best 3D printers under 400 dollars.
  • More material flexibility: Cheap 3D printers of less than $300 are usually limited to PLA filaments, and the 3D printers that can process other types of filaments as standard are not very common and reliable. In the range of $300 – 400, you are more likely to use 3D printers with heated print beds, and you can reliably process more than one type of filament.

Best 3D Printers Under $200

  • More product options: Going to the range of one of the best 3d printers under $400 will give you access to a more comprehensive list of products. It is always good to have more options. Most striking is that you will encounter more fully embedded, fully assembled 3D printers.

Best 3D Printers Under $400 Comparison Table

3D Printers Under $400
Printer NameConnectivityWeight
FlashForge FinderWi-Fi, USB44.1 lb
The Micro by M3DUSB2.2 lb
Geeetech MeCreator 2USB, SD Card20 lb
XYZprinting da Vinci Jr. 1.0 ProUSB, SD Card26.5 lb
Monoprice Maker Select PlusUSB, SD Card22 lb
Qidi Tech X-One 2USB, SD Card41.9 lb

Compsmag UK