Article Contents
Today, this article will show you how to Restart an HP Laptop. The most popular laptops are HP models because they run the Windows operating system, which offers a variety of alternatives for performing different jobs. The same is true if you wish to restart your HP laptop to achieve the best performance and prevent hardware breakdown. Restarting your HP laptop is the same as restarting any other laptop or computer. Failures during boot-up are the very worst for computer users. If you want to know more information about this Visit Official HP Support site.
They cause everything to stop working until you fix the problem, and there are numerous potential causes, including power outages, hard disk issues, faulty memory, or poor displays. The motherboard capacitors’ stored energy is one easy-to-ignore possibility. Your HP laptop might operate again if you use a hard reset to discharge this energy. However, in some circumstances, notably after running a Windows update, it might not be feasible to restart using standard methods. As a result, we have prepared solutions for that specific problem as well as a few additional ways to HP Laptop Restart.
How to Reset HP Laptop via Windows Settings
- Press Windows + I to launch the Settings app.
- Select Update & Security at the bottom of the list of options.
- Select Recovery from the menu on the left.
- In the right pane, look for the Reset this PC section under Recovery.
- Click the Get started button next to Reset this PC.
- After restarting Windows, the Choose an option window will appear.
- You can choose Keep my files, click Next, and then choose Reset.
- After selecting Remove everything, choose Just remove my files or Remove files and clean the drive from the list of options, then click Reset. You can also pick Only the drive where Windows is installed and All drives.
- Hold off until the procedure is over.
How to Reset HP Laptop via Windows Recovery Environment
- Remove all external hardware from the HP laptop, including USB drives and printers.
- As soon as your computer turns on, repeatedly press the F11 key.
- When you see the Choose an option window, let go of the key.
- After choosing Troubleshoot, press Reset this PC.
- Select between a local reinstall and a cloud download. (Optional)
- Choose between Remove everything and Keep my files.
- After that, reset the HP laptop to factory settings by following the on-screen directions.
How to hard reset HP laptop
- Ensure that every peripheral device—including the USB drive, external display, printer, and even the power supply—is unplugged or taken out of the picture.
- Shut off your HP computer.
- Look for the battery compartment cover as you turn the device over.
- To remove the cover, remove the screws using the screwdriver.
- Gently remove the battery.
- For at least 15 seconds, press and hold the Power button to discharge any remaining electrical charge.
- Correctly insert the battery, replace the cover, and tighten the screws.
- To restart an HP laptop, press the Power button.
- If a starting option appears, choose Start Windows Normally and press Enter.
- After a successful starting, re-connect each peripheral device to the HP laptop one at a time.
FAQs
You might need to force a restart if your HP laptop has frozen, locked up, or you are unable to get it to restart using the methods mentioned above. Press and hold the Power button on your HP laptop for five to ten seconds to accomplish this. The computer will switch off completely and shutdown.
After giving any onboard memory 30 seconds to fully clear, hit the Power button once more to restart Windows.
It’s possible that you don’t need to restart your HP laptop if the screen is dark. It might be hibernating or the screen might have turned off as a power-saving precaution, so try pushing on the touchpad or one of the keyboard keys. If the graphics driver has failed, you can also try pressing the Windows key+Ctrl+Shift+B to restart it, since doing so will occasionally bring the screen back on.
If none of that is successful, try forcing a shutdown by holding down the Power button for five to ten seconds while waiting for the computer to turn off. Press the Power button once again to restart the machine after waiting a minute for the memory to entirely clean. Your HP laptop should then restart into Windows and the screen should come on.