Fixed: “Your PC Did Not Start Correctly” Error

147

If you want to know how to Fix “Your PC Did Not Start Correctly” Error checkout this article. You might see an error message that says, “Your PC did not start correctly,” right after you boot into Windows. Even though this mistake isn’t a big deal once, you should pay attention to it if it keeps happening. This comes up as an error message: Automatic Repair, Your computer didn’t start up right. Windows says that the best thing to do right away is to restart your computer. Most of the time, though, this doesn’t solve the problem.

Many users are scared when they see this message because they think it means they are about to lose data or, worse, that they have already lost data. Because of this, it’s very important to back up as much of your data as you can. This kind of mistake can happen at any time, so it’s always best to be safe. This error can be caused by a number of things, such as a recent hardware upgrade, a new or updated driver, or a broken file system. If this is the first time you’ve seen the error, try restarting your computer and see if it happens again. If it does, keep reading to find out how to Fix “Your PC Did Not Start Correctly” Error.

What is the “Your PC Did Not Start Correctly” error?

When you turn on your Windows computer, you may see the message “Your PC Did Not Start Correctly” on the screen right after the Power-On Self-Test, or POST. But instead of starting Windows, you see an error message with options to restart the computer or fix the problem. Most of the time, all you need to do to fix these problems is restart your PC.

However, there are times when you need to do more than just restart your PC. Here, we’ll talk about what caused this error and show you how to fix it. When you see the error “Your PC did not start correctly” in Windows 11/10, it might drive you to get on one’s last nerve. Once it happens, you won’t be able to get your computer to start up, let alone get to your files.

Common causes of the “Your PC Did Not Start Correctly” error

1. Corrupted System Files: If essential system files are corrupted or missing, Windows may fail to start correctly. This can be due to hardware issues, software conflicts, or unexpected shutdowns.
2. Driver Problems: Outdated or incompatible drivers, especially graphics or storage drivers, can lead to startup errors. Driver conflicts can disrupt the boot process.
3. Hardware Issues: Faulty hardware components such as RAM, hard drives, or graphics cards can cause startup problems. Loose connections, overheating, or hardware failures can trigger this error.
4. Software Conflicts: Third-party software, especially security or antivirus programs, may conflict with Windows during startup, leading to errors.
5. Windows Updates: Sometimes, failed or interrupted Windows updates can disrupt the startup process, causing the “Your PC Did Not Start Correctly” error.
6. Malware or Viruses: Malicious software can damage system files or interfere with the boot process, resulting in startup issues.

Fix: “Your PC Did Not Start Correctly” Error

Run SFC and DISM

1. Get back into Windows Recovery Environment.
2. Choose “Troubleshoot,” “Advanced,” and “Command Prompt.”
3. Type the following command into the Command Prompt and press Enter. With this command, the scanning will begin.
   • /SCANNOW sfc
4. Give the scan some time to finish, and then fix any broken files it finds.
5. When you’re done, type the following command and press Enter:
   • Dism /Online /Cleanup-Image /RestoreHealth
6. Start up your computer normally.

Reset the PC

1. Choose Troubleshoot from the recovery environment.
2. Now, choose Reset this computer.
3. You will have two options to choose from:
   • Keep my files: If you choose this, your personal files will stay, but apps and settings will be deleted.
   • Remove everything: If you choose this option, everything will be deleted, including personal files, apps, and settings.
4. Choose the option that best fits your needs.
5. Follow the instructions on the screen to start the reset. The system will go through the process, which could take a while depending on how fast your hardware is and how much data you have.
6. When it’s done, you’ll have a brand-new installation of Windows and can move on to the first setup.

Use System Restore

1. Use the steps in the previous fix to get to the Windows Recovery Environment.
2. Go to Troubleshoot > Options for advanced users.
3. Choose System Restore from this menu.
4. Choose a time when the problem wasn’t there and then follow the instructions on the screen.
5. It will start up again.

Rebuild BCD

1. Select Troubleshoot > Advanced options from WinRe.
2. From the options that come up, choose “Open Command Prompt.”
3. Type the following command into the Command Prompt and hit the Enter key:
   • /rebuildbcd bootrec
4. After that, the system will look for Windows installations that are not in the BCD. You will be asked to add them if any are found.
5. Type Y and press Enter to confirm.

Use Startup Repair

1. Use the Power or Reset button to restart Windows.
2. Once the system starts to load, press and hold the Power button for a few seconds to stop the process. Do this twice more, and you should be in the Windows Recovery Environment.
3. From here, go to Troubleshoot > Advanced Options and click Startup Repair.
4. Follow the steps on the screen to finish the process of restoring.

Conclusion

The “your PC did not start correctly” error may show up if your computer can’t get into Windows. This error means that the boot process was stopped by something, which may or may not need your attention. Sometimes restarting the computer will fix the problem, but there are other things you can try if that doesn’t work. There are several ways to fix the Windows error message “Your PC did not start correctly.” But you should get your lost data back first before you try to fix this problem. If you want to know more information about this issue so you can visit Microsoft Official Website.

Questions and Answers