How to Fix “TPM fails with error code 0x80290300” Issue

302

If your machine says “TPM fails with error code 0x80290300,” don’t worry. There are easy ways how to Fix “TPM fails with error code 0x80290300” Issue that a lot of people have. An important part of your computer that keeps it safe is the TPM, which stands for “Trusted Platform Module.” It can be scary when it doesn’t work right because it can compromise your system’s security and speed. You don’t have to be very good with computers, though, to figure this out.

There are several things you can do to fix it, and this help will show you them all. If you do these things, you can be sure that your TPM works right and that your computer stays safe. You can use these steps to fix the “TPM fails with error code 0x80290300” problem, even if you don’t know much about computers. Don’t worry; just follow the steps how to Fix “TPM fails with error code 0x80290300” Issue given to get your machine back to normal.

What is “TPM fails with error code 0x80290300” Issue

It is normal for people who depend on Trusted Platform Module (TPM) technology for security to run into the error code 0x80290300. TPM is a security tool that is built into hardware and uses cryptography to make sure the system is safe. If this error shows up, it generally means there is a problem setting up the TPM module or talking to it. The reasons could be anything from old software, broken TPM drivers, settings that aren’t set up right, or hardware problems.

Usually, to fix this issue, you need to update the TPM software, reinstall or update the device drivers, check the TPM-related BIOS settings, and make sure the hardware is properly connected. Users can also use Windows tools like System File Checker (SFC) or Deployment Image Servicing and Management (DISM) to check the security of the system and fix any software problems that are found.

Causes for “TPM fails with error code 0x80290300” Issue

1. Driver Problems: TPM drivers that are out of date, not suitable, or corrupted can make it hard to talk to the TPM chip, which can cause error code 0x80290300.
2. BIOS/UEFI Configuration: If the TPM options in the BIOS or UEFI are wrong, the TPM may not be able to initialise properly, which will result in error code 0x80290300.
3. Conflicts with Security Software: Some security software or settings could cause problems with how the TPM works, leading to errors like 0x80290300.
4. Operating System Corruption: It’s possible that system files or configurations linked to TPM have become corrupted, which has caused communication problems and the error code 0x80290300 to appear.
5. TPM Initialization Failure: The TPM might not initialise correctly when the system starts up, which would cause error code 0x80290300.
6. TPM Self-tests Failed: The error number 0x80290300 can show up if the TPM’s self-tests fail during startup.

How to Fix “TPM fails with error code 0x80290300” Issue

Check TPM Status

1. Press Win + R to open the Run dialog.
2. Type tpm.msc and press Enter.
3. Check the status of the TPM.
4. If it’s showing an error or is not recognized, proceed with the following steps.

Restart Your Computer

1. Sometimes, a simple restart can resolve temporary TPM issues.
2. Restart your computer and check if the problem persists.

Update BIOS/UEFI Firmware

1. Visit your computer manufacturer’s website.
2. Check for BIOS/UEFI updates.
3. Follow the manufacturer’s instructions to install them.
4. Updating firmware may include TPM firmware updates.

Enable TPM in BIOS/UEFI

1. Restart your computer and enter the BIOS/UEFI settings.
2. This is usually done by pressing a key like F2, F10, or Del during the boot process.
3. Locate the TPM settings and ensure that TPM is enabled.
4. Save changes and exit the BIOS/UEFI.

Clear TPM

1. Open TPM Management Console (tpm.msc).
2. Right-click on the TPM and select “Clear TPM.”
3. Follow on-screen instructions to clear the TPM.
4. Restart your computer.

Reinitialize TPM

1. In the TPM Management Console, right-click on the TPM and select “Initialize TPM.”
2. Follow the on-screen prompts to complete the initialization.
3. Restart your computer.

Check Group Policy Settings

1. Ensure that your operating system is up-to-date by running Windows Update.
2. Install any pending updates and restart your computer.

Run Windows Update

1. Press Win + R to open the Run dialog.
2. Type gpedit.msc and press Enter.
3. Navigate to
   • Computer Configuration -> Administrative Templates -> Windows Components -> BitLocker Drive Encryption -> Operating System Drives.
4. Ensure that the “Require additional authentication at startup” policy is set to “Enabled“
5. After that “Allow BitLocker without a compatible TPM” is set to “Enabled.”
6. Restart your computer.

Check for Malware

1. Run a full system scan using a reputable antivirus or anti-malware program.
2. Ensure that your system is not infected.

Conclusion

In conclusion, fixing the issue where “TPM fails with error code 0x80290300” shows up may seem hard at first, but it’s not too hard if you know what to do. To begin, make sure that the TPM chip is turned on in the BIOS and that your system drivers and software are up to date. These easy steps can often fix common software problems. If the issue doesn’t go away, you may need to do more, such as resetting the TPM or changing its firmware. If you consider contacting your device manufacturer’s support or Microsoft Support official website for further assistance.

Be careful, though, so you don’t lose any important info by accident. If you don’t know what to do, you should get help from the company that made your device or a trained technician. Remember that the TPM is very important for keeping your system and data safe, so fix any problems right away. Being patient and careful when troubleshooting will help you fix this problem and make sure that your device works properly and safely, giving you peace of mind that your data is safe.

Question and Answer