Table of Contents
If you want to find the best Raspberry Pi Alternatives, you’re in luck! Raspberry Pi is a small, low-cost development board or computer that helps people of all ages learn to use computers and write code. It can be used as a desktop computer and is used by beginners, hackers, and artists for small projects.
It can be used to browse the internet, watch high-definition videos, play games, make AI assistants, or record videos. No matter what, we need alternatives to Raspberry Pi for a number of reasons. In this article, we’ll talk about the best single-board computers that we think are good alternatives to the Raspberry Pi.
Best Raspberry Pi Alternatives comparison table
Product Name | Operating System | Voltage | RAM | Dimensions | Weight | Price |
---|---|---|---|---|---|---|
Asus Tinker Board S R2.0 | Linux | 5V | 2GB | 85.6mm x 54mm | 55g | $72.99 |
Libre Computer Board AML-S905X-CC | Linux | 5V | 2GB | 85mm x 56mm | 90g | $54.99 |
Hardkernel Odroid-N2L | Linux | 12V | 4GB | 90mm x 90mm | 140g | $89.00 |
Orange Pi 5 | Linux | 5V | 8GB | 93mm x 61mm | 68g | $49.90 |
ODROID N2+ | Linux | 12V | 4GB | 90mm x 90mm | 140g | $69.00 |
Raspberry Pi Zero 2 W | Linux | 5V | 512MB | 65mm x 30mm | 9g | $15.99 |
Arduino Uno Rev3 | N/A | 5V | 2.5KB | 68.6mm x 53.4mm | 25g | $22.00 |
Asus Tinker Board S R2.0
Specification | |
---|---|
Processor | Rockchip RK3288 Cortex-A17 quad-core |
GPU | Mali-T764 GPU |
RAM | 2GB Dual-Channel LPDDR3 |
Storage | MicroSD card slot, 4GB eMMC flash storage |
Connectivity | 1 x Gigabit Ethernet, 4 x USB 2.0, 1 x HDMI, 1 x 3.5mm audio jack |
OS Support | ASUS TinkerOS (Debian-based) |
This board is great for hobbyists because it has a lot of nice features. we really like how the GPIO header is color-coded, which makes it easy to find the right pin headers. Also, the silk-screen printing on the board makes it easy to see where everything goes. This is one of the best raspberry pi alternatives that you can buy right now.
The processor on the Asus Tinker Board is great, and the 16GB eMMC speed gives it enough power for most projects. High-performance QuadCore ARM SOC 1.8GHz-Tinker Board S has 2GB of LPDDR3 dual-channel memory and an onboard 16GB eMMC and SD 3.0 interface that allow the OS, applications, and file storage to read and write at much faster speeds.
- Processor with a lot of power for smooth performance
- Dedicated GPU for tasks that require a lot of graphics.
- Dual-channel LPDDR3 RAM for faster access to memory
- Only 4GB of eMMC flash storage means you can’t store much.
- USB 2.0 ports may transfer data more slowly than USB 3.0 ports.
The Good
The Bad
Libre Computer Board AML-S905X-CC
Specification | |
---|---|
Processor | Amlogic S905X quad-core Cortex-A53 |
GPU | Mali-450 GPU |
RAM | 2GB DDR3 |
Storage | MicroSD card slot, eMMC module slot |
Connectivity | 1 x Gigabit Ethernet, 4 x USB 2.0, 1 x HDMI, 1 x 3.5mm audio jack |
OS Support | Android, Ubuntu, Debian |
This Libre Computer Board is a good single-board computer that doesn’t cost too much. This is a great choice if you want to try an SBC for the first time but don’t want to spend too much money. Also, you can add as much storage as you want to it with MicroSD cards, which is great if you use it a lot.
You won’t break any speed records on this board, but it has a lot of great features. Ubuntu 22.04 LTS and Raspbian 11 both support video playback and 3D graphics that are sped up by hardware. The latest Linux 6.x is part of the upstream software stack, along with open source graphics and video libraries.
- Dedicated GPU to speed up graphics
- Fast networking with Gigabit EtherHigh-performance computing is made possible by a powerful Amlogic processor.net
- Multiple USB 2.0 ports to connect to other devices
- Few places to store things with only a slot for a MicroSD card and an eMMC module
- In some situations, DDR3 RAM may be slower than DDR4.
The Good
The Bad
Hardkernel Odroid-N2L
Specification | |
---|---|
Processor | Amlogic S922X quad-core Cortex-A73 and dual-core Cortex-A53 |
GPU | Mali-G52 GPU |
RAM | 4GB DDR4 |
Storage | eMMC module slot, MicroSD card slot |
Connectivity | 1 x Gigabit Ethernet, 4 x USB 3.0, 1 x HDMI, 1 x 3.5mm audio jack |
OS Support | Ubuntu, CoreELEC |
The Odroid-N2L is not a good board for people who use the full-size Raspberry Pi ecosystem a lot. First of all, it’s a lot smaller, measuring just 69 x 56 mm. This makes it completely incompatible with cases that are designed for a larger board, and it’s not very well connected, with no on-board networking and only one USB 2.0 port and one USB 3.0 port.
But when it comes to price and performance, the Odroid-N2L is hard to beat. It has six cores on its Amlogic S922X system-on-chip, but they are set up differently than most: It has four of its most powerful Arm Cortex-A73 cores, which are the same as the ones on the Raspberry Pi 4 Model B but run faster at 2.2GHz.
- High-performance computing is made possible by a powerful processor with quad-core Cortex-A73 and dual-core Cortex-A53.
- Mali-G52 GPU for tasks that require a lot of graphics
- DDR4 RAM to make memory work better
- Fast networking with Gigabit Ethernet
- There are only two slots for storage: an eMMC module slot and a MicroSD card slot.
- Some applications may need extra parts, such as a power supply and a case.
The Good
The Bad
Orange Pi 5
Specification | |
---|---|
Processor | Rockchip RK3568 quad-core Cortex-A55 |
GPU | Mali-G52 GPU |
RAM | 4GB DDR4 |
Storage | MicroSD card slot |
Connectivity | 2 x Gigabit Ethernet, 4 x USB 3.0, 1 x HDMI, 1 x 3.5mm audio jack |
OS Support | Android, Ubuntu, Debian |
Orange Pi 5 is a powerful alternative to Raspberry Pi 4 that can do a lot more than Raspberry Pi 4. It has powerful hardware and performs very well. It has an ARM-based Rockchip RK3588S processor with 64-bit architecture and up to eight cores that can run at speeds of up to 2.4GHz. RPi4 can go up to 1.5GHz, so it’s clear that Orange Pi 5 has a lot more power.
The SBC is much more powerful than its rivals because it has 4x A76 and 4x A55 cores. Not only that, but it also has a huge 16GB of LPDDR4 RAM, which is incredible. In addition, the Mali-G610 GPU in the Orange Pi 5 can decode even 8K videos. This is one of the best raspberry pi alternatives that you can buy right now.
- With a powerful Rockchip processor, you can do your work quickly.
- Mali-G52 GPU to speed up graphics
- 4GB DDR4 RAM to make memory work better
- Dual Gigabit Ethernet for fast networking and better connections
- There are several USB 3.0 ports for fast data transfer.
- With only a MicroSD card slot, there aren’t many storage options.
- Some applications may need extra parts, such as a power supply and a case.
- Compared to SBCs that have been around longer, they have less software and community support.
The Good
The Bad
ODROID N2+
Specification | |
---|---|
Processor | Amlogic S922X quad-core Cortex-A73 + dual-core Cortex-A53 |
GPU | Mali-G52 GPU |
RAM | 4GB LPDDR4 |
Storage | eMMC module slot, microSD card slot |
Connectivity | 2 x Gigabit Ethernet, 4 x USB 3.0, 1 x HDMI, 1 x 3.5mm audio jack |
OS Support | Android, Ubuntu, CoreELEC |
Odroid N2+ is one of the best single-board computers out there, and it can easily compete with Raspberry Pi 4 in terms of specs and price. The N2+ has a quad-core ARM Cortex-A73 CPU and a 1.8GHz dual-core Cortex-A53 cluster that is built into the main board.
In essence, it is more powerful than the 1.5GHz A72 CPU in the RPi 4. It has 4GB of DDR4 RAM, which is great for people who like to do a lot of things at once. The best thing about the processor is that it was made using the 12nm process, so it uses much less power than the 16nm chipset in the RPi 4.
- High-performance computing is made possible by a powerful Amlogic processor.
- Mali-G52 GPU for great rendering of graphics
- 4GB LPDDR4 RAM for easy switching between tasks
- Dual Gigabit Ethernet for fast networking and better connectivity
- There are several USB 3.0 ports for fast data transfer.
- There are only two slots for storage: an eMMC module slot and a microSD card slot.
- Some applications may need extra parts, such as a power supply and a case.
- Compared to SBCs that have been around longer, they don’t have as much software and community support.
The Good
The Bad
Raspberry Pi Zero 2 W
Specification | |
---|---|
Processor | Broadcom BCM2710C0 quad-core Cortex-A53 |
GPU | VideoCore IV GPU |
RAM | 512MB LPDDR2 |
Storage | microSD card slot |
Connectivity | Wi-Fi 802.11 b/g/n, Bluetooth 5.0, Mini HDMI, USB 2.0, CSI camera connector |
OS Support | Raspberry Pi OS, Ubuntu, other Linux distributions |
Many people rely on the Raspberry Pi Zero 2 W, even though it is half the size of a Raspberry Pi 4 and more like a Raspberry Pi 3 than a Raspberry Pi 4. But this alternative won’t give you the same level of processing power and doesn’t have as much RAM. That’s enough to do basic desktop computing, use a media center or stream videos, and play old games.
The Raspberry Pi Zero 2 W can run a lot of other projects that use Raspberry Pi. Also, most operating systems for the Raspberry Pi will also work on the computer. If the lack of standard USB-A and Ethernet ports is a problem, you might want to think about getting an expansion board.
- There are only two slots for storage: an eMMC module slot and a microSD card slot.
- Some applications may need extra parts, such as a power supply and a case.Compared to SBCs that have been around longer, they don’t have as much software and community support.
- 512MB of RAM is less than other SBCs, which could slow down applications that use a lot of memory.
The Good
The Bad
Arduino Uno Rev3
Specification | |
---|---|
Microcontroller | ATmega328P |
Operating Voltage | 5V |
Input Voltage (recommended) | 7-12V |
Input Voltage (limit) | 6-20V |
Digital I/O Pins | 14 (of which 6 provide PWM output) |
Analog Input Pins | 6 |
DC Current per I/O Pin | 20mA |
DC Current for 3.3V Pin | 50mA |
Since it came out, the Raspberry Pi has been used for projects that need much less power. If your project only needs a microcontroller, an Arduino is a better alternative to a Raspberry Pi.
The Arduino Uno Rev3 is the newest version of the Arduino that can do the most.
It has a variety of input and output pins and programmable flash memory. An Arduino’s job is to follow instructions and control other things. It can be used in robots, toys, and even simple home automation. You can also use a Raspberry Pi to automate your home, maybe with the help of an Arduino.
- Widely used and well-known microcontroller board for professionals and hobbyists
- Simple and easy to use, it is good for people who are just starting out in electronics and programming.
- Compared to more advanced microcontrollers, they have less processing power.
The Good
The Bad
FAQs
Benchmark tests show that the Raspberry Pi 4 has a more powerful CPU. For example, the BPI M5 did slightly worse on the Octane 2.0 benchmark than the Pi 4. The Banana Pi M5 board still works better than the Raspberry Pi 3 B, but it is not as good as the Raspberry Pi 4, which is a higher-end model.
Le Potato is a great board. It has an Amlogic S905X SoC with a 1.512GHz 64-bit quad-core ARM Cortex-A53, which is about the same as the Raspberry Pi 3B+. The top board from Libre Computer has four full-sized USB 2.0 ports, an HDMI 2.0 port, and a 40-pin GPIO header.
IT professionals can do a lot of coding and development with the Raspberry Pi, which makes it a great tool when you want to make something but don’t know where to start.
The last time we wrote about the new space-ready Raspberry Pi units, called Astro Pi, was in September. They were launched from NASA’s Kennedy Space Center in December as part of Expedition 66 on a Dragon Cargo spacecraft on top of a SpaceX Falcon 9 rocket.