How to Fix “Automatic Startup Repair Couldn’t Repair Your PC” issue

155

Do you know how to Fix “Automatic Startup Repair Couldn’t Repair Your PC” issue? Your Windows computer may give you the “Automatic Startup Repair Couldn’t Repair Your PC” error, which is a problem that can be both frustrating and perplexing. This error message will typically appear on your screen whenever your computer experiences complications while attempting to boot up. But there’s no reason to get worked up about it. If you are experiencing issues with your computer that is running Windows 11 or Windows 10, and you or the operating system decide to run Startup Repair – and if Startup Repair fails, then you may receive a screen with the following message: Your computer could not be fixed by Automatic Startup Repair.

Have you been unable to finish a task that was assigned to you because your Windows computer was unable to start because of an error message that read “Automatic Repair couldn’t repair your PC”? A mistake of this nature could result in an endless cycle of Automatic Repair, which would prevent you from accessing your important files and using your computer. The focus of this article will be on fundamental troubleshooting steps that, when followed, will repair your system and prevent such error messages from appearing. But before we get into that, let’s find out how to Fix “Automatic Startup Repair Couldn’t Repair Your PC” issue about this mistake.

Causes of the “Automatic Startup Repair Couldn’t Repair Your PC”

1. Corrupted System Files: One of the most frequent causes is corrupted or missing system files. This can happen due to sudden power outages, software conflicts, or malware infections. When critical system files are damaged, Windows can’t boot properly.
2. Corrupted Boot Configuration Data (BCD): The BCD is a crucial component of the Windows boot process. If it becomes corrupted, the system may not be able to locate the necessary files for startup.
3. Hardware Issues: Hardware problems, such as a failing hard drive, RAM issues, or a disconnected data cable, can result in this error. If your computer cannot access or communicate with its hardware components, it may fail to boot.
4. Software or Driver Conflicts: Incompatible or corrupted software applications or drivers can interfere with the startup process. For instance, a recently installed driver may not be compatible with your system.
5. Malware or Virus Infections: Malware or viruses can damage system files or modify critical boot files. In such cases, the repair process may not be able to restore the system to a healthy state.
6. Disk Errors: Disk errors, bad sectors, or file system issues on your hard drive can prevent Windows from starting up correctly.

How To Fix “Automatic Startup Repair Couldn’t Repair Your PC”

Boot into Safe Mode

1. Restart your computer.
2. When the Windows logo appears, press and hold the Shift key while clicking Restart.
3. Select Troubleshoot, then Advanced options, and finally Startup Settings.
4. Click Restart and choose Safe Mode with Networking.

Use System Restore

1. In Safe Mode, go to Control Panel.
2. Search for Recovery and click on it.
3. Select Open System Restore and follow the prompts.

Run SFC (System File Checker)

1. In Safe Mode, open a Command Prompt as an administrator.
2. Type sfc /scannow and press Enter.
3. Wait for the scan to complete, and follow any on-screen instructions.

Run CHKDSK

1. In Safe Mode, open a Command Prompt as an administrator.
2. Type chkdsk /f /r and press Enter.
3. Restart your computer and let CHKDSK complete the process.

Use DISM (Deployment Image Service and Management Tool)

1. In Safe Mode, open a Command Prompt as an administrator.
2. Type DISM /Online /Cleanup-Image /RestoreHealth and press Enter.
3. Wait for the process to finish.

Conclusion

With Windows 11/10, we are able to fix both minor and major issues with our personal computers by using the Automatic Repair feature. The majority of the time, Windows will fix the problem for you; however, in Windows 11/10, you may occasionally see the message “Automatic Repair could not repair your PC” on the blue screen. It’s possible that this is due to an issue that already existed that you were attempting to fix, corrupt system files, or bad sectors in the system driver.

Questions and Answers