Table of Contents
This article will explain how to Fix ‘Canon Printer Error Code 5200′ issue. Almost all printers today use a mix of Cyan, Magenta, Yellow, and Black (CMYK) to make prints, and the Canon printer is no different. Canon is a well-known brand of printers, and its printers are known for being reliable and of good quality. But like any other mechanical device, Canon printers have problems that need to be fixed right away. Canon printer error 5200 (support code) is a regular example of this.
But if any of these inks run out in your Canon printer, the printhead will get too hot and stop working. So that the printhead doesn’t get any worse, the printer stops writing and displays error 5200. On the printer, you will also see the power light and the alarm light flashing. In this help, we’ll talk about what causes this error and how to Fix ‘Canon Printer Error Code 5200’ issue in a few simple ways. So, carefully read this guide, and you will easily be able to solve this problem.
What is Canon Printer Error Code 5200?
The amount and use of ink are linked to the Canon printer error code 5200. Canon printers are made so that the leftover colours of ink are mixed together to make black. The cartridges are either low, empty, or broken, which is what the error code 5200 means.
Even though there’s nothing to worry about, changing the mistake without any help is like fighting uphill. That’s why we’re here to help you with your job. Most of the time, refill problems are to blame for Canon printer error 5200. It could be because the ink in your cartridge is low, because the cartridge is broken, or because your printer’s computer board is broken. We know that Canon printers are set up to use the colours in the colour ink cartridge to print in black even if the black ink cartridge runs out.
Causes of Canon Printer Error Code 5200
- Ink cartridge problems: The error number 5200 can happen if your Canon printer’s ink cartridges are not installed correctly or are empty. This can make it hard for the printer to work right.
- Overheating of the print head: If the print head of your Canon printer gets too hot, the error code 5200 can happen. This can happen if you print a lot of things at once without giving the printer time to cool down.
- Problems with the printer driver: Error code 5200 can also be caused by printer drivers that are out of date or broken. If the driver software isn’t working right, it could get in the way of printing and cause the problem.
- Problems with the printer’s internal hardware: The error number 5200 can show up if there are problems with the printer’s internal hardware, like a broken logic board or sensor. These problems may need to be diagnosed and fixed by a professional.
- Software conflicts: Problems with your printer, like error code 5200, can sometimes be caused by problems with other software or programs on your computer. It’s important to make sure that there aren’t any apps going in the background that could cause problems.
Ways to Fix ‘Canon Printer Error Code 5200’ issue
Reset the Printer
- Turn off your Canon printer and unplug it from the power source.
- Wait for a few seconds, then plug the printer back in and turn it on.
Remove and Reinstall Ink Cartridges
- Open the printer cover to access the ink cartridges.
- Remove all the ink cartridges from the printer carefully.
- Check the cartridges for any visible signs of damage or blockage. Clean them if necessary.
- Reinstall the ink cartridges back into their respective slots, ensuring they are properly seated.
Check the Ink Level
- Access the printer’s settings or control panel.
- Navigate to the ink level indicator or cartridge information.
- Ensure that the ink cartridges have sufficient ink levels. Replace any empty or low ink cartridges.
Clean the Print Head
- Access the printer’s settings or control panel.
- Navigate to the maintenance or cleaning options.
- Select the print head cleaning option.
- Follow the on-screen instructions to initiate the cleaning process.
- Wait for the printer to complete the cleaning cycle.
Perform a Temperature Reset
- Turn off the printer.
- Press and hold the Stop/Reset or Resume/Cancel button.
- While holding the button, press and hold the Power button.
- Continue holding both buttons simultaneously for a few seconds.
- Release the buttons when the printer’s display screen turns off.
- Turn on the printer again and check if the error persists.
Contact Canon Support
If the error code 5200 persists after following the above steps, it is recommended to contact Canon customer support or visit the official Canon website for further assistance. Provide them with detailed information about the error and the steps you have already taken to troubleshoot.
Questions and Answers
A paper jam can cause the 5200 mistake. There are two videos that can help you fix problems with paper jams or paper feed. If you keep getting the 5200 problem, your MAXIFY MB2720 will need to be fixed. You are qualified for Canon’s Upgrade Program.
The 5200 code is a hardware mistake in general. I think that you should reset the printer. While the printer is running, unplug the power cord and let it sit for one minute. Press the power button 5 times while the power is off.
The 5200 code is a hardware mistake in general. I think that you should reset the printer. While the printer is running, unplug the power cord and let it sit for one minute. Press the power button 5 times while the power is off.
This is because your waste ink is already full. Set the printer back up. Press and hold the reset button while the device is off. Then, turn it back on and press the reset button twice.