Table of Contents
Fix “Driver_Power_State_Failure” error on Windows 11/10 is the topic of this article, which will walk you through the process. Failure of the Driver Power State Monitor is a Windows stop code that has some intrigue to it. It seems that a driver on your computer has entered a power state that is either inconsistent or invalid. As a consequence of this, it typically occurs when personal computers emerge from a state of sleep or hibernation.
Your computer will effectively restart itself and display a blue screen of death (BSOD) in order to avert potential damage to the operating system or to data storage devices that could occur if the drivers and the devices to which they are connected were allowed to continue operating. One of the Blue Screen of Death problems is an unknown driver power state. In most circumstances, it is related to the stop code 0x0000009F. If you get the stop code driver power state failure, it means that the driver is operating in an abnormal or erroneous power condition. There is a possibility that a driver power status failure will take place as your computer transitions into or out of the sleep mode. here are the ways to Fix “Driver_Power_State_Failure” error on Windows 11/10.
What is Driver Power State Failure?
One of the Blue Screen of Death errors is a driver power state failure. In most cases, this issue is associated with the stop code 0x0000009F. The driver is in an inconsistent or invalid power state if the driver power state failure stop code is displayed, as demonstrated by the message. Failure to enter or exit sleep mode on your computer could cause the driver power state to become corrupted. It is also possible for it to occur whenever you start or shut down your computer. When it does happen, you could relate it to the following picture.
On the other hand, the reasons behind the DRIVER-POWER-STATE-FAILURE error could be very different. It could be caused by drivers that are not compatible with each other or by incorrect power settings. In a similar vein, some users have reported that it could be brought on by an application called ntoskrnl.exe. What are some solutions to the problem of driver power state failure in Windows 11/10? You are provided with the following options to choose from. However, before you fix this issue, you need to do some preparatory work in order to eliminate the possibility of losing data.
Common Causes of the “Driver_Power_State_Failure” Error
- Outdated or Incompatible Drivers: One of the most common reasons for this error is outdated or incompatible drivers for hardware components like graphics cards, network adapters, or power management.
- Driver Conflicts: Conflicts between different drivers can lead to this error. When multiple drivers try to control the same hardware component simultaneously, it can cause instability.
- Power Settings: Incorrect power settings or configurations can trigger this error. This includes settings related to sleep mode, hibernation, and power management features.
- Firmware Issues: Outdated firmware for hardware components like the BIOS or SSD firmware can result in driver power state failures.
- Corrupt System Files: System files essential for driver and hardware operation may become corrupted, leading to this error.
- Hardware Problems: Faulty or failing hardware, such as RAM, hard drives, or motherboards, can cause driver power state failures.
- Third-Party Software: Certain third-party software, especially those that interact with drivers or power management settings, can conflict with system drivers and trigger this error.
Ways to Fix “Driver_Power_State_Failure” error on Windows 11/10
Change power options of the device

- Start up Device Manager.
- To open Properties, find the network adapter and double-click on it.
- Take a look at the Power Management tab and uncheck the box next to Let the computer turn this device off to save power. To save your changes, click OK.
Uninstall the problematic driver
- Boot your PC into Safe Mode if it won’t boot normally.
- On your keyboard, press the Windows logo key and R at the same time to invoke the Run box.
- Type devmgmt.msc and click OK.
- Expand the category and find the device with a yellow exclamation mark. If you didn’t see any yellow exclamation marks in Device Manager.
- Right-click the device and select Uninstall device.
- Restart your PC and check to see if the Driver Power State Failure error resolves.
Turn off power saving
- Boot your PC into Safe Mode if it won’t boot normally.
- On your keyboard, press the Win+R (Windows logo key and R key) at the same time to invoke the Run box.
- Type control panel and click OK to open the Control Panel window.
- View by Small icons and select Power Options.
- Ensure Balanced (recommended) is selected, and click Change plan settings next to it.
- Click Change advanced power settings.
- Expand Wireless Adapter Settings and Power Saving Mode, then change the setting to Maximum Performance.
- Expand PCI Express and Link State Power Management, then change the setting to Maximum power savings.
- Click Apply then OK.
- Reboot your computer to check to see if the Driver Power State Failure error is gone. If this doesn’t work for you, try the next fix.
Update device drivers
- Boot your PC into Safe Mode.
- Download and install Driver Easy.
- Run Driver Easy and click Scan Now. Driver Easy will then scan your computer and detect any problem drivers.
- Click the Update button next to the driver you need to automatically download the correct version of the driver, and manually install them one by one (you can do this with the FREE version).
- Reboot your PC and check to see if the Driver Power State Failure error has been resolved.
Change Power Plan settings
- Find Power Options and the plan that is currently chosen. To change the plan, click on it.
- Click on Change more advanced power settings.
- In the list of settings, go to Sleep and make sure that both Sleep and Hibernation are set to Never.
- All of the buttons and the lid’s power buttons should be set to “Do nothing.”
- Things will be saved when you click Apply and OK.
Conclusion
While Windows is a great operating system, it does sometimes have issues. An error called a “blue screen” is one of the most scary and common issues. It tells you that your system crashed and gives you a specific error code to help you figure out what went wrong. You’ve come to the right place to learn how to fix the “DRIVER_POWER_STATE_FAILURE” BSOD error. If you want to know more information about this issue so you can visit Microsoft Official Website.
Questions and Answers
These are the most common reasons why a computer’s power supply or any power supply fails: A change in the AC line that isn’t stopped by the right built-in protection. If the power supply doesn’t have overload protection (like fuses), an overload can happen if a component further down the line fails.
You could also get Kernel-Power Error 41 BSOD if your RAM or memory is broken. It was said by some users that the problem was caused by a bad RAM. You can use the Memory Diagnostic Tool to see if it’s broken.
Power outages can hurt system files and data, and the power spikes that follow can break hardware. So, if you live in an area where the power isn’t stable, you should take the time to protect yourself from both. It will save you a lot of trouble. One bad thing that can happen to your hardware is that the power might go out.