Fix: ‘Epson Printer Error Code 0x97’ issue

In this article we will discuss about how to Fix ‘Epson Printer Error Code 0x97′ issue. Epson error 0x97 is a message that tells you something is wrong with your printer. It usually shows up on the LED screen of the printer. Most of the time, users get this error code while printing, and the printer stops working after that. Also, most people who have this error say they are using an Epson WF-4630, WF-3640, or WF-7610 printer. Many websites will only tell you to download an Epson error 0x97 patch or an error 0x97 repair utility.

We strongly advise you to stay away from these unreliable third-party sources. You are mistaken if you think that some suspicious “patches” from unknown third-party websites can fix problems with your printer. Be careful, because you could end up installing malware or very dangerous files. Worrying is that the error happens out of the blue, with no warning signs or messages. This makes it harder to figure out what caused the problem and how to fix it. But our experts have looked into the problem and made a full tutorial on how to Fix ‘Epson Printer Error Code 0x97’ issue so you can keep using your printer without worry.

Power-cycling the Printer

This method is different from the first. So, if that didn’t work, try this to see if the error is caused by a problem with the hardware inside.

1. Unplug all cables.
2. Just wait 5 minutes.
3. Hold down the power button for 60 seconds or more (DO NOT let go).
4. After more than 60 seconds, plug in the power cord while holding down the power button.
5. After plugging in the power cord, hold down the power button for more than 60 seconds.
6. After 60 seconds, you can let go of the power button.

Check Your Ink Cartridges

1. You need to check your ink cartridges.
2. If your cartridges are clogged or not connected to your printer, you might have trouble.
3. You can take out and clean your cartridges.
4. If any of your cartridges are broken, you might have to buy new ones.
5. Then send them to your printer again.
6. Now, your printer should be able to do its job.
7. Tip: The exact steps may be different depending on the type of printer.

Wet Tissue

In some cases, the error code may show up because there is leftover ink around the head sprayer. Using a wet tissue to wipe off the waste ink can sometimes fix the problem. Follow the steps below to finish the cleaning process.

1. Open up the printer.
2. Wet a piece of paper with warm water.
3. Now, put the head in the middle.
4. Put the paper towel on the head-cleaning pad.
5. Move the head to where it should be.
6. Wait 10 minutes.

Run Windows Printer Troubleshooter

The Windows printer troubleshooter is a great tool for fixing printer problems. You can try this if you can’t fix the Epson error code 0x97.

1. Press Win, and then in the search box, type troubleshoot. Choose Troubleshooting from the list of results of your search.
2. Now, in the Hardware and Sound section, click Use a printer.
3. Click Next in the pop-up window to start figuring out what’s wrong with your printer.
4. Wait until Windows finds problems with your printer, and then follow the instructions on the screen to fix them.
5. After it’s done, you can see if the Epson error code 0x97 is still there.

Unplug and Plug-in

To follow the steps below, you’ll need to know how to open and use your printer. If you aren’t sure, look at the instructions that came with your printer. The steps are different for each model.

1. Open the printer’s case and look inside to see if any papers or other things are stuck. Delete it if you find any.
2. Take out all of the ink cartridges.
3. Unplug all of the cables and USBs.
4. Once the printer is unplugged, press the power button as if you were trying to turn it on. This will get rid of any leftover electricity in the printer.
5. Now, plug in all the USBs and the power cord.
6. Check for the error by turning on your printer.

Customer Support

If none of the above solutions worked, it’s likely that the problem is with the hardware. You can’t fix the printer right now without risking breaking it for good. If you don’t care about that warning and still want to keep going, you can try some of the steps in this article. If you don’t want to keep going through the steps, you can call customer service and they will help you. If your printer is still under warranty, Epson should send you a new one in a few days. If you want to know more information about this Visit Official Epson Website.

What is Epson Error Code 0x97?

As was already said, Epson Error Code 0x97 is one of the most common error codes on Epson printers. Epson Error Code 0x97 is shown when there is a problem with the printer’s internal hardware while printing. When a 0x97 error happens, your print job will stop right away, and it won’t start again until the problem is fixed.

Epson Error Code 0x97 usually happens on Epson WorkForce (WF) printers like the Epson WF-3640, Epson WF-4630, Epson WF-3620, Epson WF-7620, and Epson WF-7610. However, it can also happen on other Epson printers. Most of the hardware problems that cause this error are simple and easy to fix, which is good news. Some of the most common problems with the hardware that lead to Epson Error Code 0x97 are:

1. Paper Jams
2. Hardware like cartridges, trays, and cords that were not put in correctly
3. Motherboard Breaks Down
4. Jammed cartridge nozzles