Table of Contents
Do you want to know how to fix ‘Liquid Detected in Lightning Connector’ issue? This means that water got into the lightning port in some way. The warning is a safety feature that Apple put in place to keep you and your iPhone from getting hurt while charging. The warning pop-up makes sure that you don’t put your iPhone on charge by accident, which could damage the electronics board.
One of the things that people like about the iPhone is that it can handle water. Even though it can handle being splashed, getting it too wet can damage the hardware. Your iPhone will show you an error message that says “Liquid detected in Lightning connector” if it finds liquid in its port. This is to keep the hardware from getting damaged.
If you see the “Liquid Detected in Lightning Connector” error on your iPhone, you should use the tips I’ve given in this guide to fix the problem. In rare cases, users have also seen the error message when using non-certified charging accessories with their Apple iPhone. Some people have also said that they see this “Liquid Detected in Lightning Connector” message even though their iPhone has never been wet. We mentioned below are the ways how to fix ‘Liquid Detected in Lightning Connector’ issue.
What is the “Liquid Detected in Lightning Connector” issue?
First of all, the charging port on your iPhone is also called a Lightning connector or Lightning port because it only works with a Lightning cable. Liquids and moisture can only get into your phone through the Lightning port or by putting it in water. The error message will show an option called “Emergency Override.” This tells your phone to keep charging even if it finds moisture in the port. It’s best not to do this, since it could damage the hardware and cause corrosion inside the connector.
You can get liquid in your charging port in many ways. Moisture can get stuck in the Lightning port of your iPhone if you spill a drink on it, leave it in a damp bathroom, or get caught outside during a storm. The good news is that if you have an iPhone XR, iPhone XS, iPhone XS Max, or a newer model, your device can detect liquid or moisture in the Lightning Port and warn you whenever you connect a Lightning cable or other Lightning accessories to your iPhone’s port. When you see one of these alerts on your iPhone, it means that it found liquid in the Lightning port, the cable, or an accessory.
What causes the “Liquid Detected in Lightning Connector” issue?
- Water Exposure: If the device comes into contact with water or any other liquids, even in small amounts, it can trigger the liquid detection sensor in the Lightning connector.
- Humid Environments: High humidity levels can sometimes cause condensation to form inside the Lightning connector, triggering the sensor even if the device hasn’t been directly exposed to liquid.
- Moisture Buildup: Dust or debris in the Lightning port can mix with moisture in the air and create a damp environment, triggering the sensor.
- Accidental Spills: Accidentally spilling liquids on the device, even if it’s just a few drops, can lead to the sensor detecting moisture.
- Swimming or Submersion: Submerging the device in water, even briefly, can introduce moisture into the Lightning port, triggering the sensor.
- Damp Pockets or Bags: Keeping the device in a damp environment, such as a wet pocket or bag, can lead to moisture entering the Lightning port.
How to fix ‘Liquid Detected in Lightning Connector’ issue
Troubleshoot the Lightning Cable
- Try different Lightning cable if issue persists.
- Alert occurs with specific cable, indicates iPhone not at fault.
- Beware of fake Apple cables; opt for official/MFi-certified accessories.
Clean Your iPhone’s Lightning Port
- Lightning port blockage can hinder charging.
- Gently clean port using SIM-eject tool to remove “Liquid Detected” message.
- Avoid spraying cleaning products or using compressed air directly on iPhone during cleaning.
Dry the Lightning Connector
- Safer to Assume “Liquid Detected” alert on dry iPhone.
- iPhones can handle some water, not waterproof.
- Not all iPhone models usable in rain.
- Recent water exposure → water in charging port.
- Fix: Dry out device’s charging port.
- For water-related activities, consider waterproof case for whole device.
Use a Wireless Charger
- Dismiss and Emergency Override buttons on liquid detection alert.
- Choose Emergency Override to force-charge iPhone, hurt device possible.
- If other methods fail, buy wireless charger to remove pop-up.
- Safe to use wireless charger in this case.
Restart the iPhone
- Press side button for power on iPhone.
- Slide to Power Off appears.
- Follow instructions.
- Wait a few seconds after turning off.
- Press side button to turn on.
If the warning message comes up after you restart the iPhone, try to force restart it. Here’s what you need to do.
- Press Volume Up button, then let go.
- Press and let go of Volume Down button.
- Press power button for a long time until Apple logo appears on screen.
Conclusion
So these are the best ways to fix the “Liquid detected in Lightning Connector” error and get your iPhone to charge. Take care to avoid water damage, and don’t do any of the things on the list of “don’ts.” Charging ports are necessary for your phone’s battery to stay charged. But there are also times when the Lightning connector on your iPhone can get wet by accident. Hope these tips helped you fix the “Liquid has been detected in the Lightning connector” problem.
Questions and Answers
Tap your phone gently against your hand with the charging port facing down so water can drip out. Don’t use rice to hurry up the process. Instead, put the phone in a room with a fan or put silica packets near the port where it charges.
To dry your iPhone, gently tap it against your hand with the Lightning connector facing down to get rid of any extra water. Leave your iPhone somewhere dry and airy. Try charging with a Lightning cable or connecting a Lightning accessory after at least 30 minutes.
Even if you don’t believe it, the best way to dry your phone is to leave it alone until the water evaporates on its own. Most of the time, the moisture inside the port should dry up on its own in a few hours. Make sure to keep your device standing up where it can get plenty of air.
If your device shows a water drop icon, which means that it has found moisture, you should turn it off and let it dry completely. If the icon doesn’t go away and charging still doesn’t work, try clearing your USB cache.