Table of Contents
This article will show you how to Fix ‘Magsafe Charger Not Working’ issue. We love how easy it is to snap a wireless charger with a MagSafe connector onto the back of an iPhone, and the experience is much better than regular wireless charging. MagSafe is now on three versions of iPhones, but it still has a few problems now and then. If you’re having the same problem and your iPhone’s MagSafe charger isn’t working, here’s what you need to do. Magsafe chargers have been around for about 15 years, but Apple has only put them on Macbooks. The technology was brought back in 2020 with the iPhone 14.
The Wireless MagSafe charger has a circle of oblong magnets that work without getting in the way of other magnets. But MagSafe chargers still have problems, even though they are more convenient. You charged your iPhone overnight with the MagSafe cable, but the battery life went down. It’s said that the MagSafe charger makes it easier for iPhones to charge wirelessly, but that’s not always true. In this piece, We’ll explain how to Fix ‘Magsafe Charger Not Working’ issue your iPhone.
What is MagSafe?
If you’ve used wireless charging before, you might have had problems when putting your phone on a Qi wireless charger. If it wasn’t set up right, you’d come back to it hours later and find that your phone hadn’t charged at all. To fix these problems, Apple put magnets inside the phone’s charge coil and in the Apple MagSafe battery pack (sold separately) to make sure it always connects in the right place. It also has an NFC receiver that lets the iPhone know which device is being used.
With this new technology, you’ll know exactly when your phone is charging, and you’ll also be able to charge it wirelessly at a faster rate, up to 15W instead of the 7.5W that most Qi chargers offer. MagSafe is also compatible with Qi charging, so you can use it to wirelessly charge other iPhones and the latest AirPods models with a wireless charging case, but you won’t get those faster charging speeds. And if you’re worried that the magnets in your phone will stick to anything magnetic you’re holding or that you can hang it on the fridge door, that’s a big no. MagSafe will only connect to other MagSafe devices that are also compatible.
How does MagSafe work?
MagSafe lets you connect and unplug things quickly, but how does it work? The connector on a Macbook is made up of spring-loaded pins that magnetically join to pins on the power cable. With this design, the cable will snap into place when you bring it close to the laptop and come off if you pull on it by chance. On the iPhone and AirPods, a set of magnets arranged in a circle around the wireless charging coil make it possible to snap the device on and off.
Don’t forget that MagSafe doesn’t actually send power or data. On the iPhone, charging is done through the Qi wireless charging standard. On the MacBook, charging is done through copper contacts. All it does is have a magnetic connection system that helps get things lined up and locked together. When you connect certain accessories, like Apple’s MagSafe wireless power bank, they use NFC to show an animation and tell you how much power they have left.
Causes of Magsafe Charger Not Working
- Faulty MagSafe charger: The charger itself may be defective or damaged, preventing it from working properly.
- Physical damage: If the charger or its cable has been subjected to physical damage, such as bending, fraying, or crushing, it can lead to connection issues and prevent it from working.
- Dirt or debris: Accumulated dirt, dust, or debris on the MagSafe connector or charging port can interfere with the connection and prevent the charger from working.
- Misalignment: If the MagSafe connector is not properly aligned with the charging port on your device, it may not establish a reliable connection.
- Software issues: Occasionally, software glitches or conflicts can cause the charger not to be recognized or to stop working.
- Power source issues: If the power outlet or power adapter you are using is faulty, it can prevent the charger from delivering power to your device.
Ways to Fix ‘Magsafe Charger Not Working’ issue
Check the Power Source
- Ensure that your MagSafe charger is properly connected to a power source, such as a wall outlet or a powered USB port on your computer.
- Verify that the power source is functioning correctly by connecting another device or using a different charger.
Examine the MagSafe Connector
- Inspect the MagSafe connector for any visible damage, such as bent pins or debris.
- If you notice any issues, gently clean the connector with a soft, lint-free cloth.
- If the connector is damaged, it may need to be replaced.
- Contact Apple Support or visit an authorized service provider for assistance.
Clean the Charging Port
- Check the charging port on your device for any debris, dirt, or lint that could prevent proper connection with the MagSafe charger.
- If you find any obstructions, carefully remove them using a non-metallic tool or a clean, dry toothbrush.
Restart Your Device
- Disconnect the MagSafe charger from your device.
- Restart your device by turning it off and then back on again.
- After the restart, reconnect the MagSafe charger to your device and check if it is working.
Update Software
- Ensure that your device is running the latest version of iOS or macOS.
- Connect your device to a Wi-Fi or cellular network and go to Settings > General > Software Update to check for any available updates.
- If updates are available, install them and restart your device.
Reset SMC (System Management Controller)
For MacBook models with Apple silicon:
- Shut down your MacBook.
- Press and hold the power button for 10 seconds, then release it.
- Turn on your MacBook.
For MacBook models with an Intel processor:
- Shut down your MacBook.
- Press and hold the left Shift + Control + Option keys, along with the power button, for 10 seconds.
- Release all the keys and turn on your MacBook.
Test with Another MagSafe Charger:
- If possible, try using another MagSafe charger to determine if the issue lies with the charger itself.
- If the alternate charger works fine, consider replacing your original MagSafe charger.
Questions and Answers
Make sure there is nothing in the USB-C port on the power charger or the USB-C connector. Restart your Mac. Connect the USB-C power adapter to the wall outlet and the USB-C to MagSafe 3 Cable to the power adapter and your Mac. Then try charging again.
Use the Apple 20W USB-C power adapter or another compatible power charger (sold separately) to connect MagSafe Charger to power. Choose one of these: iPhone: (allowed models) Place the MagSafe Charger on the back of the iPhone or its MagSafe case or cover. When an iPhone starts charging, the charging sign shows up.
Change the angle of the charger or lay it completely flat to make sure that the magnets in the charger and the magnets in your watch are lined up. If the charge signal doesn’t show up on the display of your Apple Watch Ultra even when it’s flat, take off the band before putting the watch on the charger.