Table of Contents
This article will show you how to fix ‘Logitech Mouse Double Clicking’ issue If your Logitech mouse won’t let you double-click, you’ve come to the right place. Logitech peripherals and accessories, like keyboards, mice, speakers, and a lot more, are known for being of the highest quality and costing the least amount of money. Logitech makes high-quality hardware and software that is well-designed and affordable. After a few years of use, devices sometimes break down or get damaged.
One of them is that the Logitech mouse double-clicks too often. People who used Logitech mice also complained about the following: You don’t realize how often you use a mouse’s single click and double click buttons until the device stops working. When you double-click the mouse by accident, it can mess up your games and make even basic computing harder and more prone to mistakes. There are a few ways to fix ‘Logitech Mouse Double Clicking’ issue. Sometimes it’s just an old mouse that needs to be replaced.
What is a double-clicking mouse?

Mice get tired over time because they do the same things over and over. All that rubbing and moving around can cause trouble. To make matters worse, the mouse has to talk to your computer, and that talk can be full of mistakes that stop it from working. It’s usually a sign that the mouse is close to dying. These are some of the things that could be causing your computer’s Logitech mouse to double-click. Fixing the problem will work best if these causes are dealt with by giving solutions to the reason-centered factor.
What causes a Logitech mouse to double click?
- Hardware Problems: Sometimes, even if you only click once, a double-click will happen automatically because of a problem with the hardware or damage to it. It could also make the Scroll button jump instead of move. If the connection between the mouse and the computer port is loose, the mouse won’t work as it should.
- Incorrect Mouse Settings: If your Windows PC’s mouse settings are wrong, you won’t be able to double-click.
- Charge Accumulation: If you use a Logitech mouse for a long time at once, the charge in the mouse builds up, which causes the Logitech mouse double click problem. To avoid this, give your mouse a few minutes of rest every few hours of work to get rid of any static electricity that has built up in it.
- Problems with the Mouse Spring: If you use your mouse for a long time, the spring inside it might get loose and make the Mouse Scroll and Click buttons stop working. Learn how to change the spring by reading Method 6.
- Outdated Device Drivers: If the device drivers on your computer are not compatible, the Logitech speakers not working or the mouse double-clicking problem could be caused. You can quickly fix this problem by making sure you have the most recent version of your driver. But this could stop Logitech software from running on your computer.
Ways to Fix ‘Logitech Mouse Double Clicking’ issue
Checking Mouse Drivers
If neither of the above solutions works, we can try to update or reinstall your mouse drivers. This will reset all of your mouse’s settings, and it will look like it was just installed on your computer. Also lost will be all the saved preferences.
- Press Windows + R, type “devmgmt.msc” in the box, and press Enter.
- Once you’re in the device manager, expand the “Mice and other pointing devices” section, find your mouse, right-click on it, and choose “Uninstall device.”
- Unplug your mouse when you’re done. Take the batteries out and let everything sit for a few minutes before plugging it back in.
- Now, you can either go to Logitech’s official website and download the drivers from there, or you can let Windows update do it for you. Check to see if this works.
Checking for Static Charge
According to what our users have told us, there are also times when the mouse gets a static charge after being used for a long time. This could make it click twice instead of once. We will use a very simple method to get rid of all the static electricity and see if that fixes the problem.
- Take the batteries out of the mouse and turn it off.
- Now, press the mouse’s two buttons over and over for 30 seconds to 1 minute.
- Reconnect everything and see if the problem is gone.
Trying to Repair the Spring
If your mouse doesn’t come with a warranty, we can try to fix the spring that makes it click. Each button has a small click mechanism under the body of the mouse. When you press a button, this mechanism clicks. There’s a chance that the spring inside that mechanism is either broken or just loose. Note that if you don’t follow the steps exactly, this could break your mouse and make it useless, so be very careful.
- Find the screws on the bottom of the mouse and unscrew the body.
- Once the body is unscrewed, take it out carefully so you don’t mess up the structure inside.
- Find the problem with the click mechanism.
- Look at the top white button. It will fall off when we take off the shell, so be careful.
- Take off the click mechanism’s black case.
- Open the cover by gently lifting it away from the latch with a flat-head screwdriver.
- Take the cover off a little bit so you can do the same thing on the back.
- Identify the sprint inside the click mechanism.
- Take out the small copper spring.
- Use the screwdriver to bend the curve while holding it down with your finger.
- Ensure that the curve is the right shape.
- Hook the tension spring back in place by hooking it to the small hook at the front of the mechanism.
- Push the curved tab into place with the flat-head screwdriver.
- Keep the spring’s back end under the small arm at the back of the mechanism.
- Pay close attention to the arrows labelled in the second picture.
- Use tweezers to put the tiny white button in place.
- Hold the cover with one hand and connect it to the body as shown.
- Test a few clicks before putting the whole body back together.
- If it clicks correctly, put the whole body back together.
- Connect the mouse to the computer and check if the problem is still there.
Filing a Warranty Claim to Logitech
If your mouse has a warranty and the above steps don’t fix the double-clicking problem, you can file a warranty claim. Many users said that as soon as they turned on their mouse, it started double-clicking. This seems to be a common problem with Logitech mice. To file a warranty claim, you need to go to the official Logitech Warranty Claim website and fill out an application with the right serial numbers and product descriptions.
Checking Mouse Settings
There’s a good chance that the mouse settings on your computer aren’t right, and that’s why you double-click by accident. The mouse will work fine, but its behaviour will change because the settings in Windows were changed. We’ll go through each setting one at a time to see if changing them fixes the problem.
- Press Windows + R, type “control” in the box, and press Enter.
- Once you’re in the control panel, choose “Large icons” in the upper right corner of the screen.
- Now, click the Mouse option.
- Now, move the double-click speed slider all the way to the left.
Now, check to see if your problem is fixed. If double-clicking is still happening, you can try checking another setting.
- Press Windows + S, type “single click” in the dialogue box, and click on Specify single– or double–double-click to open which appears in the list of results.
- Go to the General tab and check the box next to Double-click to open an item (single-click to select) under “Click item as follows.”
- Click “Apply” to save your changes and leave.
- Now properly restart your computer and check to see if the problem is gone.
Conclusion
When you click once in Windows, does your mouse click twice? When simple things like clicking to select, dragging files, and more don’t work the way you expect them to, it can cause a lot of trouble. We’ll show you how to fix a mouse that double-clicks when you only click it once. This will help you figure out what’s wrong and fix it. We’ll also look at how to stop your mouse from clicking twice when it shouldn’t.
Questions and Answers
If you are using a wireless mouse, the problem may be caused by interference between the wireless signal from the mouse and the wireless receiver. If interference gets in the way of the wireless signal, the computer might get the wrong signals or misread the signals from the mouse.
Fix and explanation: If your mouse isn’t broken, this problem is caused by static electricity building up inside it. Just breathe in the space between the mouse and the mouse button. There is enough moisture in our breath to get rid of the static electricity.
Logitech can replace your product, offer to send you a product that works the same, or fix any product with new, refurbished, or used parts, as long as those parts meet the technical specifications of the product.
When a mouse is shaky, it’s usually because other apps are trying to take control or focus away from the one you’re using. Make sure you check the apps and scripts that are currently running. They might be getting in the way of the mouse.