Table of Contents
During the cloning process, you may get the error message “Macrium Reflect Clone Failed.” Getting to the bottom of things Some people don’t know what Macrium Reflect is. In fact, it is a backup tool for Microsoft Windows that was made in 2006 by Paramount Software UK Ltd. With the help of Microsoft Volume Shadow Copy Service, it makes images of discs and backup archives for files.
Macrium Reflect is a disc cloning utility that lets you copy one disc to another, back up whole partitions or just individual files and folders. But some users say that they get a Macrium Reflect clone failed error when they use the backup software Macrium Reflect to copy a hard drive.
How to fix the problem with Macrium Reflect clone failed? Do you know why the Macrium Reflect clone didn’t work? Here are a few reasons why the Macrium Reflect clone failed error might happen. You could look at it.
Fix :’Macrium reflect clone failed’ Error
Clean destination disk via clean command
- In the command prompt window, type “diskpart”.
- Type “list disk” to show all the disks connected to your computer.
- Type “select disk [disk number]” to select the destination hard drive.
- Type “clean all”.
Check bad sectors via chkdsk command
The most likely cause of Macrium Reflect error 0 or error 8 is bad sectors, so check the disc for bad sectors first. If the error has something to do with reading data, check the source disc. If it has to do with writing data, check the disc where the data is going.
- Press Windows + R key and type “CMD” in a Run box to bring out a command prompt.
- Type “chkdsk [drive letter]: /f”. If you want to check H: drive, then you should type: “chkdsk H: f”.
- Type “chkdsk [drive letter]: /r” to repair the found error.
Try Disabling Antivirus
Antivirus software might stop a programme from running if it seems to be doing something that could let a virus into the computer. When an antivirus software stops the cloning process, you might see the error “Access denied” along with an error code.
Turn off your antivirus software and try cloning again to fix this. If you have more than one antivirus programme, turn them all off for a short time. Try cloning again after all the antivirus programmes have been turned off.
Check the Drive Connection
Before you start using third-party options, you should make sure that your two drives are physically connected correctly. If you are connecting an SSD through a USB port, try plugging it into the motherboard and cloning again.
Change the hard drive’s SATA connection and, if you can, try to change the cable as well. Cables are easy to break, and if they do, the cloning process can be messed up.
Update Macrium Reflect
- Launch Macrium Reflect on your computer.
- Open the Other Tasks menu.
- Choose Check for updates. Macrium Reflect will scan for the pending updates and prompt you to download. Download and install the update and check if the error is resolved.
Reinstall Macrium Reflect
- To open Run, press the Windows key + R.
- To open the Control Panel, type appwiz.cpl and click OK.
- Choose Macrium Reflect from the list of programmes you have installed.
- Click on “Remove.” When UAC asks you to confirm what you want to do, click Yes.
- Once the tool has been uninstalled, go to the Macrium Reflect download centre and get the most recent version.
- After you’ve downloaded the programme, run the installer and follow the instructions on the screen.
Try creating an image instead of cloning
- Launch Macrium Reflect and wait for the system drives to show.
- Choose the drive that you want to image.
- Click the Image this disk link at the near bottom.
- Click the browse button and navigate to the location where you want to save the image. Next, click OK to save the selection.
- Next, choose a template for your backup, and click the Finish button to begin the image creation process.
If you’ve tried all of these solutions and your iPhone still has the same problem, you can find more information on Apple’s official support website.
FAQ
Is it OK to clone a failing hard drive
When your computer won’t start normally, neither the operating system nor the disc controller can read or write to the failing hard drive. The only thing you can do is clone the failing hard drive and move the data to a new disc using a bootable disc.
Why can’t I clone my hard drive
Make sure that the size of the drive you are cloning to is the same or bigger than the size of the drive you are cloning from. If the old hard drive has bad sectors or errors, it might not be able to be cloned.
How many times can you clone a hard drive
You can make as many copies of a drive as you want. It means to copy the drive exactly. On Linux or UNIX, you can use the dd command. On Windows, you can use a number of programmes, such as Macrium Reflect. It is common to change the size of the partitions while keeping the data, but most people still think of this as cloning.
How do I clone my Macrium Reflect hard drive to SSD
- Click the Backup tab in Macrium Reflect.
- Click on the disc you want to make a copy of.
- Click the Clone button….
- Click Select a disc to clone to in the target disc area and choose the SSD disc.
- Move the source partitions to the target disc by dragging and dropping.