Table of Contents
Yes, it is possible to Recover Data From Dead Hard Drives that has stopped working. Both physical and logical types of disc damage can be fixed. For logical damage, the most important thing is to get your computer to recognize the broken device so you can use recovery software to get your files back from a dead external hard drive. Even if the drive stops working, the data is still there and can be retrieved with the right tools.
Things are getting harder for drivers who have been hurt physically. But don’t give up hope, because things might not be as bad as they look. We’ll talk about what you can do to get your data back after both physical and logical problems. External hard drives are often used with Windows systems to give home computers more storage space.
They are a great way to store photos, videos, and other files that you don’t want on the main disc of your computer. With an external hard drive, it’s also easy to share files with friends and coworkers. Many terabytes of valuable data can be stored on a single Seagate or Toshiba external drive.
How to Recover Data From Dead Hard Drives
Data Recovery Software
You can recover files from a dead hard drive using Disk Drill, a data recovery tool. Disk Drill specializes in data recovery and can recover data from hard drives, SD cards, USB drives, and more. It’s trusted in the data recovery community for its successful track record and useful features that also help protect data in addition to recovering it.
- Download Disk Drill. Install it and open it.
- Select the dead hard drive and click Search for lost data.
- Click Review found items once the scan has finished.
- Mark your files for recovery by checking the tickbox next to each file. The Recovery chances column will give you an indication of how likely a successful recovery will be. Green indicates high, yellow indicates average, and red indicates low. When ready, click Recover.
- Specify a location where your recovered files can go.
Make use of the Command Prompt
- Launch command prompt and run as administrator.
- Type chkdsk *:/f command and press Enter. Replace * with the dead drive letter.
- Press Y until the command line appears.
- Enter the drive letter and press Enter.
- Enter this command: drive letter: attrib –h –r –s /s /d *.*.
causes of Dead Hard Drives
Logical Damage
Software errors can damage the hard drive in a way that makes no sense. There are many things that can cause these errors, such as virus attacks, damaged files or file directories, and mistakes made by people. If your hard drive has logical damage, it may not be able to start up its operating system and become unreadable.
Firmware Failure
When the hard drive starts up, it needs to immediately read the firmware on its platters and controller. If the hard drive can’t get to its firmware because the platters are broken, the electronics aren’t working, or something else, it can’t boot. The problem usually happens when the code for the firmware is messed up. This means that the hard drive and the PC don’t work well together.
Poor Maintenance
A slow computer that takes a long time to boot up is a sign that it hasn’t been taken care of well. It’s important to run disc defragmentation on a computer system regularly (at least once a month) to keep it in good shape. If you do this and your computer still gets slower, it could be because the hard drive is about to die.