Table of Contents
This article will show you how to clean PSVR 2. When it comes to cleaning your PSVR2 glasses, the most important thing is to make sure you use a microfiber cloth. Any other material might be too rough on the lenses, so microfiber is the best choice. This is the same way you would clean regular eyeglasses. Then you can only move on if you have a microfiber cloth. Next, you shouldn’t spray any liquids on the glasses to clean them.
Even if you think it will help, there’s no reason to do it, and it could make things worse. You may be asking how to clean your PSVR 2 and PlayStation VR2 Sense controllers, since you use them with your hands and face. You don’t want to let your new gear slowly get so dirty that it’s uncomfortable to wear or that the lenses are smudged and hard to see when you’re playing the best PSVR 2 games. No one wants that to happen.
People who care about their skin will also want to make sure that the rubber parts of the headset are free of germs, as some people with acne-prone skin have found that wearing VR headsets can cause breakouts. If you don’t keep things clean, it’s not a big surprise. We mentioned below are the ways how to clean PSVR 2.
Remove and clean the light shield
First, unplug the headset from your PS5 and turn off the Sense devices. First, take off the light shield. Gently pull on the left or right side to pull it out of the case. The light screen should move away from the headset over time.
Once you’ve taken it off fully, you can clean the light shield well with water and a soft cloth. Let it dry all the way in a place with good air flow.
Clean the vents and earpieces
If dust has built up in the air vents on the top front of the case, you can remove it with a mobile vacuum cleaner or something similar.
To clean the stereo headphones that came with the computer, take out the earpieces and clean them by hand with a light soap. Use a soft cloth to dry the ear tips all the way through before putting them back on the headphones.
Wipe the headset and lenses
Sony says to clean the headset and the Sense controls with a soft, dry cloth. Wet wipes and other things that have been treated with toxic liquids shouldn’t be used. Sony also says that the Playstation VR 2 shouldn’t be in long-term touch with things that are made of rubber or vinyl.
Use a soft, dry cloth to remove dust and other dirt from the headset and controls. Watch out for the four tracking cams that are built into the front. You need to be very careful with the glasses. Use only cotton cloths that are made for cleaning glasses and lenses.
Tissues or paper towels won’t work and can damage the lenses for good. After you’ve cleaned the surfaces and lenses, you can put the light shield back on (once it’s completely dry). Watch out for the pins near the nose.
What is the best tool to clean PSVR 2 lenses?
Sony has told PSVR 2 owners that they shouldn’t use paper towels or tissues to clean the lenses unless they are made for that purpose. They suggest using a soft, dry cloth that is made for cleaning eyeglasses.
A microfiber cloth is the best way to clean the glasses on a PSVR 2. These soft, gentle cloths are made to clean things like camera lenses, eyeglasses, and the screens of electronic devices.
They are made of very fine fibers that can clean smudges, fingerprints, and dust without scratching or damaging the lens. This microfiber cloth from Koala worked great for a lot of PSVR 2 users.