How to Disable USB Selective Suspend in Windows 11/10

This article will show you how to Disable USB Selective Suspend in Windows 11/10. When you connect an external device to your computer, sometimes it won’t be recognized, and you’ll get an error message saying “USB device not recognized.” This problem is often caused by the USB port itself or by the fact that your device has the USB Selective Suspend option turned on. The USB selective suspend feature in Windows 11 and Windows 10 lets you automatically put USB devices in a very low-power state when they aren’t being used.

It’s a useful feature because it helps your laptop or tablet’s battery last longer, but it may cause problems with some devices you connect to your PC. If a USB device isn’t working right, you can try to stop Windows from using selective suspend. That might use up more power, but it might also help you figure out what’s wrong and fix it. In this article, we’ll show you how to Disable USB Selective Suspend in Windows 11/10. If you want to know more information about this visit official Microsoft support site.

Disable USB Selective Suspend for individual USB ports

If you don’t want to turn off the feature for all of your USB ports and devices, you can turn it off for just one port, which will only affect the devices that are connected to that port. Here are the steps you need to take in Windows 11 to turn off USB selective suspend for a specific USB port or device:

1. Press Windows + X + M to open the Device Manager.
2. Increase the size of the “Universal Serial Bus controllers” section.
3. Right-click on the USB port or device you want to turn off USB selective suspend for and choose “Properties.”
4. Click the “Power Management” tab.
5. “Let the computer turn off this device to save power” should not be checked.
6. Click the “OK” button.

Disable USB Selective Suspend using Power Options

1. Go to Run > control to open the Control Panel.
2. Select Power Options.
3. Click on Change plan settings next to the power plan you are using right now.
4. Click on Advanced power settings and make changes.
5. Click on USB selective suspend setting under USB settings.
6. From the drop-down menus, choose “Disabled” for both “On battery” and “Plugged in.”
7. To use the settings, click OK.

Disable USB Selective Suspend using Windows 11 Settings

Before, you could find this option in the Control Panel. In the next section, we’ll talk about how to use the control panel. For now, let’s look at how to turn off USB Selective Suspend in Windows 11:

1. Press Windows and I to open the Settings app.
2. Tap Bluetooth and devices.
3. Click on USB in the right pane.
4. Turn off the “USB battery saver” switch.
5. This will stop your computer from suspending while connected to USB.
6. To turn on USB selective suspend, just turn “USB battery saver” on and off.

What does the USB selective suspend setting do?

In Windows 10 and 11, the USB selective suspend settings tell the computer which USB devices to turn off to save power. Some USB devices that are plugged into your ports are set to use less power, so they don’t use power when they don’t need to. So, Select suspend is a way for your computer to choose which USB devices to turn off when they aren’t being used.

It lets the hub driver turn off a single USB port temporarily without affecting how the other USB ports work. Also, connecting a lot of USB devices to your computer, like mice, drives, and keyboards, can quickly drain the battery. So the idea behind Selective suspend is that it saves power by turning off USB devices that aren’t being used. But if you turn on the “Selective suspend” feature, errors can happen when you try to use USB devices. Errors like “USB device not recognized” mean that your computer has turned off the device because it uses a lot of power.

Also, the selective suspend feature isn’t needed when the computer is charging, but it is more useful when the computer is running on battery power. Shortly, the USB selective suspend feature lets you choose which USB devices, like webcams, printers, and scanners, to put into a low-power state. The point of this feature is to stop your computer from using too much power when it doesn’t need to.