Table of Contents
Today, in this article we will show you how to fix Home Network Problems. The system of interconnected technologies that connects your home devices to the Internet is known as a home network. It’s not necessary for a bad Wi-Fi connection to ruin your day. You can regain a lost internet connection in a number of ways.
You’ll be back online in no time if you use these network troubleshooting strategies. As you can see, a lot of technology is required to connect your device of choice to the Internet at your service provider. Any of the aforementioned technologies could malfunction.
It may be as easy as a cable that isn’t plugged in correctly, or it might be more complicated and challenging to identify, such incompatible security settings, old technology, or modem configuration issues.
Ways to fix Home Network Problems
Check Physical Network Connections
You should next check to make sure that all physical network connections are in place if your network issue still exists after rebooting. Before you dive into settings and tests, here is another simple remedy.
Make sure the Ethernet cable is not broken or unplugged before using it to connect to your router. Make sure the wireless switch on your laptop is not in the off position if it has one.
Check your router and modem after you’ve made sure the connection is working properly. Are the modem and/or router LEDs glowing green normally? After rebooting, if no lights come on, the device can be dead or broken.
Run the Windows Network Troubleshooter
Some built-in troubleshooters in Windows can locate and resolve problems automatically. Right-click the network icon in your System Tray and select Troubleshoot Problems to launch the network troubleshooter.
You can also go to Settings > Update & Security > Troubleshoot > Additional troubleshooters and choose Internet Connections > Run the troubleshooter to launch it.
Once the troubleshooter has finished, it may detect problems but fail to solve them, fix problems, or return no results. Reconnect if the troubleshooter identifies a problem that it can resolve. Make a note of the name of any mistake or issue that Windows cannot automatically fix so that you can further research it.
Power Cycle Everything and Check Other Devices
Network problems shouldn’t be taken seriously immediately away because the solution may be as easy as restarting your hardware. Make sure restarting is your initial response to network issues as well because it often resolves issues.
Restart your computer, modem, and router to begin troubleshooting. You can deactivate your modem and router by pressing the power buttons located on the backs of each device. Simply pull the power plugs if not.
Wait 60 seconds before turning the modem and router back on so that the caches are completely cleared. Before connecting your router, plug in your modem first and let it fully turn on before you reconnect anything. Initially turning everything off and back on makes sure it isn’t a transient network issue. Rebooting now is preferable to waiting another 30 minutes when you don’t have to.
If you have a second computer (or a mobile device) that you may try using to go online once you’ve restarted. If you discover that no devices can connect, your ISP or hardware are probably at fault.
If you discover that only one machine cannot connect to the internet, you can further focus on the issue. Run an antivirus check on that device to make sure malware isn’t interfering with your connection. Additionally, ensure that the connection is not being blocked by your firewall’s settings.
Confirm That You Have a Valid IP Address
You’ve now established that the issue is permanent and that all of your gear functions. You must identify the location on the connection where the network issue is happening because Windows is unable to resolve it on its own.
It’s a good idea to make sure that you don’t have any strange IP settings selected. To check this, open Settings and go to Network & Internet > Status. Below the Advanced network settings header, choose Change adapter options. In the resulting window, double-click the name of your network.
Next, you’ll see a status window. Click the Properties button here. Inside the next dialog, double-click the Internet Protocol Version 4 entry.
Unless you’ve set up a static IP address (if you don’t know what this is, you probably don’t use one), make sure you have both Obtain an IP address automatically and Obtain DNS server address automatically checked. Repeat this process for Internet Protocol Version 6, if it’s enabled, to ensure everything is automatic there as well.