How to Install ComSpike Module and Conduction Grid Module in Starfield

Do you know how to Install ComSpike Module and Conduction Grid Module in Starfield. When playing Starfield, it’s possible to gain significant advantages throughout your space travels by equipping your ship with specialized modules. The ComSpike Module and the Conduction Grid Module are two other modules that are extremely helpful. Adding these components to your ship will make it possible to access crucial capabilities. Because completing this mission requires using the shipbuilder menu, which isn’t required very frequently during a typical Starfield playthrough, it’s possible that some players will become confused. However, once you have determined where to locate all of the necessary components, this should not pose too much of a challenge for you.

Therefore, if you want to achieve the desired result, make sure to follow the instructions that we provide. Boosting your ability to communicate while you are in space is made possible by the ComSpike Module. You will have access to new options, such as broadcasting on various frequencies and tapping into protected channels, when you use these new capabilities. Your ship gains an advantage in combat thanks to the Conduction Grid. This module has the ability to optimize the distribution of energy to weapon systems, thereby increasing the effectiveness and damage of those systems. Here are the steps how to Install ComSpike Module and Conduction Grid Module in Starfield.

What is the ComSpike Module and Conduction Grid Module?

Two pieces of gear in Starfield, the ComSpike Module and the Conduction Grid Module, can be used to change how a player’s ship works. The ComSpike Module is a jamming tool that can be used to stop enemy sensors and communications. The Conduction Grid Module is a way to distribute power that can make the weapons and systems on a player’s ship work better.

By messing up enemy sensors and communications, the ComSpike Module can be used to get a tactical edge in battle. Enemies may not be able to plan their attacks well or keep track of the player’s ship. The Conduction Grid Module can be used to give more power to a player’s ship’s weapons and systems to make them work better. For example, this can make a player’s weapons do more damage and their ship’s engines and shields work better.

How to Install ComSpike Module and Conduction Grid Module in Starfield

1. At the Service Room in the Key, talk to Jasmine Durand.
2. Choose the dialogue option “Mind helping me with my ship?” when you talk to her.
3. Then choose “I’d like to see and change my ships” from the menu.
4. After that, Jasmine will let you into the Ship Builder menu.
5. Head over to “Add options” and then click on the “Equipment” tab.
6. You can choose the ComSpike Module and the Conducting Grid that says “free.”
7. To put them in place, drag them to the right spot.

You’ll need to talk to Jasmine Durand after you talk to Delgado in Starfield during the Crimson’s Fleet storyline. She’s in the Service Room, which is the first room on your left as you enter the Key from the Space Port. You can get to the Ship Builder menu in Starfield by talking to Jasmine Durand. She will often sell you Nova Gaactic, Stroud, and HopeTech upgrades and parts. She will also sell you the three main Crimson Fleet ships: the Crimson Fleet Ghost, the Crimson Fleet Haund, and the Crimson Fleet Phantom.

1. Open the Ship Builder menu and go to the Equipment tab in the Add Options section.
2. This is where you’ll find the ComSpike Module and the Conduction Grid.
3. Both modules will be marked as free, and you’ll have to choose them before you can see where they should go in order to install them.
4. When you’re done, you can leave the Ship Builder menu, and the ComSpike module and the Conduction Grid will be installed on your ship.

Benefits of installing the ComSpike Module and Conduction Grid Module

1. Enhanced Communication: The ComSpike Module improves your ship’s communication capabilities, allowing for more reliable and extended range communication, which can be crucial for navigation, receiving important messages, or contacting other spacecraft.
2. Improved Electrical Conductivity: The Conduction Grid Module enhances the electrical conductivity of your ship, making it more efficient and reliable. This can result in improved power distribution, reduced energy loss, and better performance for various ship systems.
3. Reduced Costs: Both modules are marked as “free,” which means you can enjoy these benefits without any additional cost, making them a cost-effective way to upgrade your ship.
4. Enhanced Functionality: These modules can potentially enhance the functionality and overall performance of your ship, making it more capable and adaptable to different situations or missions.
5. Competitive Edge: With these enhancements, your ship may gain a competitive edge in various scenarios, such as trade, exploration, or combat, as it will be better equipped to handle challenges and opportunities.
6. Increased Resale Value: Upgrading your ship with these modules can increase its resale value, as prospective buyers often look for ships with advanced communication and electrical systems.

System Requirements of Starfield

Conclusion

In order to progress through the Crimson Fleet SysDef quest line in Starfield, you will need to ensure that your ship is equipped with both the ComSpike Module and the Conduction Grid Module. If you don’t have it, the electromagnetic radiation will completely destroy your ship, and you can’t get to Kryx’s Legacy without it. If you’re having trouble figuring out how to get the technology onto your ship in Starfield, the following instructions will walk you through installing the ComSpike and Conduction Grid modules.

Questions and Answers