Table of Contents
Creality, a company that was established in 2014, has established a reputation in the FFF 3D printing industry thanks to its assortment of extrusion-based machines that make the technology available to a larger audience. The Chinese company with headquarters in Shenzhen provides a broad and diverse selection of FFF 3D printers, DLP, as well as 3D scanners and laser engravers. also you will check our article on Creality Sermoon V1 Pro review.
The Ender 3D printer series, which includes the more recent Ender 3 S1 Plus and the older, extremely well-known Ender 3 printer, is Creality’s main product line. The CR-10 Smart Pro, a new version of their renowned CR-10 model, can be found in the CR series, a collection of larger and more potent printers. The Sermoon V1 Pro is a mid-range offering that combines a straightforward extrusion configuration with a fully enclosed build volume and an ecosystem that makes technology learning simple and enjoyable for even the most inexperienced user.
Because it doesn’t need to be assembled or levelled, the Creality Sermoon V1 Pro is ideal for novices. You just need to unpack, load your filament, and you’re ready to go. The Sermoon’s all-in-one design makes it easy to integrate into a home setting; this is especially evident when you consider how quiet the printer is. The Sermoon V1 Pro only makes about 45dB of noise while printing, which is comparable to the volume of a refrigerator.
Design
The Sermoon V1 Pro is a compact, completely enclosed printer with a microwave-like appearance. White plastic is used to encase it, and the top and side have clear windows. A clear front door with a magnet closure and sensor enables the printer to detect when the door is open and, if programmed to do so, to stop printing. The enclosure has lights, a camera that can be accessed through a phone app, and a case fan. You can access the extruder to change the filament, perform maintenance, or simply to keep it cool while printing because the top of the case is detachable.
This printer has a movable bed and is a Core XY model. The X and Y axes continue to move along rods at the top thanks to a single stepper motor and belt drive. This keeps the print more stable and lowers motion on the bed for incredibly smooth prints. It has a lightweight Creality Sprite direct drive with two gears. Since the filament needs to move from a spool mounted on the outside of the box, across the X and Y axis rods, and into the extruder, there is still a Bowden tube.
This Bowden tube printer pulls the filament rather than pushing it, in contrast to other Bowden tube printers. There is no need to be concerned about it wearing out because it also doesn’t reach the heated portion of the direct drive. When the hotend hits 250 degrees, PLA, TPU, and PETG can be printed without discomfort. ABS can’t operate at the bed’s 80 degree temperature. Even though it’s enclosed, the type of vented enclosure it isn’t exactly is what you’d want to get rid of ABS fumes. Creality advises printing at slower speeds because the cooling fan appears to be fairly modest.
With this machine, we have printed beautiful objects at a speed of 65 mm/s, which is the same speed we typically use for an Ender 3 S1 Pro, which also has a direct drive Sprite. The construction plate is a flexible steel sheet that has been coated and magnetised. We don’t like the PC coating, and even Crealtiy admits as much by including a glue stick to make it adhere. The touch screen is integrated into the printer’s wall and has been specially designed for the Sermoon V1 Pro. It is quite straightforward and offers few options. While this is ideal for someone using the printer in a STEM lab, seasoned professionals looking for more sophisticated options might find it frustrating.
Creality Sermoon V1 Pro review: Print Quality
We started with a flexible dinosaur and a whistle, two pre-sliced Gcode files that would have been on the SD card. Both of these had an unnecessary raft for adherence that gave the underside an unpleasant texture. Both were beautifully printed, aside from the fact that the flexible dinosaur actually flexes and the whistle actually whistles. Additionally, we only utilized the smartphone app to explore the Creality Cloud library, download a small-format printer test, slice it, and wirelessly send it to the printer. Everything was possible within the app; there was never a need to push any buttons on the printer.
Excellent results on the print quality test. Overall, the output was very accurate with no stringing, good bridging, and well-printed overhangs. A 23-hour high-resolution baby Groot planter print was our next step as we grew. We were able to glue the arm back on and fill up the holes with modelling clay, but it may have been a touch too quick as one of the arms got knocked off. While some people prefer to print this kind of item out using PLA made from real wood, you should be aware that they are quite abrasive and shorten the model’s lifespan. Personally, we find that a short ten-minute paint job, with a layer of primer to blur the layer lines, can produce superior results.
Finally, we printed a straightforward vase using silk rainbow PLA after switching out the filaments. The overhang at the base has a rough, uneven texture, suggesting that this may have been done a little too quickly. The rest of it is excellent and doesn’t leak when holding water. We should point out that since “vase mode” is a gimmick, we didn’t print this. You’ll wind up with a non-functional, flimsy, and fragile construction. We ended up printing out a tiny avocado boat. It’s buoyant! Of course, changing the print settings will address many of the problems we mentioned. However, since most users won’t do this, we only test using the manufacturer’s recommended default profiles.
Features
A heated print bed with steel sheet that is magnetically PEI-coated is a feature of the Sermoon V1 Pro that enhances adhesion. Once your print has cooled, it’s easy to peel and snap off, and thus far we’ve had no problems with adhesion, so obviously it works. Wi-Fi connectivity is available, allowing you to print from the Creality Cloud smartphone app or website. The Pro model also includes a built-in webcam. also you will learn our article on Creality Sermoon V1 Pro review.
This makes it possible for you to view your current print from a distance from the smartphone app, but bizarrely not from the website. When viewing the camera feed, internal lighting is turned on automatically. However, you can always adjust it using the touchscreen on the printer. Even outside of my house, seeing the built-in camera stream immediately functioned flawlessly, however we discovered that earlier recordings couldn’t be accessed.
Every print is allegedly automatically recorded and saved to the SD card, with previous recordings being overwritten when the card is full (like a dashcam). We were unable to play any of the recordings from the app, though we could view a list of them, and we were unable to locate any data files on the SD card. Because they simply didn’t work, we are unable to say whether these are timelapse or full video recordings.
Creality Sermoon V1 Pro review: Leveling
Since it leaves the factory level, levelling the Sermoon is a mystery. The tray holding the heated bed is fastened to the Z axis by thumb screws from below. We are unsure of how much printing would be required to cause the machine to vibrate out of level because they appear to be quite tight. In the event that the machine needs to be calibrated again, a levelling routine is available in the settings menu.
Since there is no probe for auto levelling and this is one of the strangest semi-manual levelling procedures we’ve seen, you better hope that it never does. Press Print Setup Auto levelling from the main menu. The device will confirm that you wish to level it before erasing the old configurations. The bed will then be brought to the machine’s top. Onto the bed, slide the levelling card. The bed will be positioned by the Sermoon only millimeters away from the nozzle.
Once the paper is loosely held between the bed and the nozzle, tap the up and down arrows. Press Save. Now it will go to each corner so you may adjust the height. The catch is that it only circles the bed once; if you think you set it incorrectly, you have to start over. We manually level a print bed three or four times, not only because the bed requires so much attention, but also because we want to ensure that every nozzle is perfectly aligned.
Performance
Let’s start by discussing noise. According to Creality, the Sermoon V1Pro operates quietly and produces less than 45dB. Whether or not you are familiar with the dB scale, the number is unquestionably loud. Because the printer appeared much noisier to us than our dishwasher, which also claimed to be approximately 45dB, and which we typically barely hear, we downloaded a free sound metre app to check whether it indicated 45dB. The app displayed 50–54dB even without the two additional case fans active. It is undoubtedly not as precise as an expensive instrument for measuring loudness, but it is probably close to the actual value.
Although it might be close to the stated value, keep in mind that the dB scale is logarithmic rather than linear. In our subjective testing, the Sermoon is marginally quieter than open 3D printers. You can work in the same room as the Sermoon while it is running, but you definitely wouldn’t want to sleep there while it is printing. When the case fans are running, the noise level increases to about 60 dB, which is roughly the volume of a normal conversation, background music, or a laptop with the fans operating at maximum speed.
The sound level of a 3D printer may not be important to you, but print quality will. Additionally, when using PLA, the Sermoon V1 Pro is generally very good. The majority of prints are neat and devoid of stringing, which occurs when unwelcome filament strands connect several print components. Although there was a clear Z-seam in all the prints we tried, the first Benchy we printed at 100% were one of the nicest we’ve seen. Where the nozzle starts and stops each layer, this appears as a vertical join in each print. The default settings in Creality’s slicer place this join on the ‘Back’ of models, but on models like this, there isn’t a back and there isn’t a side that isn’t visible. you can read our article on Creality Sermoon V1 Pro review.
Creality Sermoon V1 Pro review: Price and availability
Creality’s Sermoon V1 Pro sells for $539, which is $120 more expensive than the non-Pro model. The UK website for Creality sells both models for £489 and £419, respectively. However, you can get it cheaper from other stores who are having sales. For instance, Box.co.uk was offering the V1 Pro in the UK at the time of the review for a substantially lower price of £349 even though it wasn’t in stock. The Ender 3 S1, which has true auto bed levelling and a greater print volume, is available for the same price.
Conclusion
The Sermoon V1 Pro is a generally excellent printer; it is stylish, understated, and quiet. It can generate some fantastic prints and requires little to no setup. This makes it ideal for those who are new to computing or who are interested but have a busy schedule. The Sermoon V1 Pro includes numerous more features in addition to its key selling qualities, such as the Sprite Direct Drive Extruder, the sealed case, and the integrated camera. Learn more about them in this thorough examination and hands-on test. Discover what they are, what they do, and what print quality you may anticipate.