Article Contents
Now that laser cuts have been updated so they can be used at home for craft projects, art, and more, it’s harder than ever to choose the best one. The best laser cutters can be used to cut materials, but they can also be used to etch and score to make projects quickly and professionally. For example, if you are a crafter who uses Cricut, the best laser cuts can help you get more done.
What could you do with a laser cutter? It changes, but they can do a lot of different things because of how precisely they can cut things. Using digital drawing tools, you can put even the most detailed designs on any material you want. Most of the best laser cutters now have their own apps, and you can see an example of this in my Glowforge lesson on how to engrave digital art onto wood. You can also get ideas from the skateboards that Bear Walker has made.
Best Laser Cutters Comparison Table
| Product | Laser Power | Engraving/Cutting Area | Supported Materials | Price Range |
|---|---|---|---|---|
| xTools M1 Laser Cutter | 40W | 300 x 500 mm | Wood, leather, paper, fabric | $300-$400 |
| Ten-High Upgraded Version CO2 | 40W | 400 x 600 mm | Wood, acrylic, leather, etc. | $400-$500 |
| Ortur Laser Master 3 | 15W/20W | 400 x 430 mm | Wood, leather, paper, etc. | $250-$350 |
| 130W Reci W4 Co2 Laser Tube Cutter | 130W | 1300 x 900 mm | Wood, acrylic, leather, etc. | $3,000-$4,000 |
| WAINLUX JL7 Laser Engraver Cutter | 60W | 400 x 430 mm | Wood, leather, paper, etc. | $500-$600 |
xTools M1 laser cutter
| Specification | Value |
|---|---|
| Laser Power | 40W |
| Work Area | 300 x 500 mm |
| Supported Materials | Wood, leather, acrylic, paper, fabric, etc. |
| Connectivity | USB |
| Software Compatibility | CorelDraw, AutoCAD, LaserCAD, etc. |
The xTool M1 laser cutter(opens in new tab) is different from the other machines on my list because it can cut with both a laser and a blade. Its bent, well-designed box of tricks is a neat place to store all of its tools. The xTool M1’s mix of tools and small size make it stand out, which is why it won the Red Dot Design Award.
Since you can do what the best Cricut machines can do and use a laser to carve, cut, and score, this top laser cutter can do a little more than some of the pure laser cutters on this list. The blade can cut better than some lasers and doesn’t heat up, so you don’t have to spend time covering things before you cut them. In my study of the xTool M1, I also found that you need the enclosed metal risers, but you should also get the Air Filter.
The Good
- Software that is easy to use and small and light in size
- Can engrave on a number of different materials.
The Bad
- Not much room to work
Ten-High Upgraded Version CO2
| Specification | Value |
|---|---|
| Laser Power | 40W |
| Work Area | 400 x 600 mm |
| Supported Materials | Wood, leather, acrylic, paper, fabric, etc. |
| Connectivity | USB |
| Software Compatibility | CorelDraw, AutoCAD, LaserCAD, etc. |
Precision metal mould laser head, adjustable laser energy, wear-resistance, heat resistance, red light positioning system, positioning can be seen, The top brand laser tube is of high quality, works well, and lasts a long time. The temperature of the water for cooling is always shown, which is safe and convenient. Simple buttons, digital display, and visual operation. Excellent suction effect, fast speed, low noise, and treatment to prevent corrosion and oxidation.
The Good
- Large space to work
- Software that works well together
- A good cooling system that can be used for a long time
The Bad
- Cutting may be harder if the laser doesn’t have enough power.
Ortur Laser Master 3
| Specification | Value |
|---|---|
| Laser Power | 20W |
| Work Area | 400 x 430 mm |
| Supported Materials | Wood, leather, paper, felt, etc. |
| Connectivity | Wi-Fi, USB |
| Software Compatibility | LightBurn, LaserGRBL, etc. |
Ortur’s newest game is OLM 3, which stands for Ortur Laser Master 3. It has a modern design with an open frame and a dark grey colour. It has a size of 23.1″ x 25.9″ and a work surface of 15.74″ x 15.74″. The frames are strong and made of aluminium. Most of Ortur’s mechanical parts, including the controller, are built into the frame, giving it a futuristic look. OLM 3 is driven by a 10W diode laser that can work on wood, fabric, acrylic, paper, leather, plastic, foam, anodized metal, rubber, and more. The X and Y axes of OLM 3 are driven by belts.
It can go as fast as 20,000 mm/min at its fastest. The machine is not motorised along the Z-axis, so you’ll have to set the laser point by hand. Ortur Laser Master 3 uses the TMC2209 stepper driver for sensorless tracking. The problem is that when the gantry hits the frame, the load on the motor suddenly jumps up. The machine can link via WiFi, TF card, and USB. Since the firmware is stored on the memory card, it needs to be put into the device for it to work.
The Good
- Wi-Fi connectivity makes it easy to use the remote
- Software that works with popular programmes
- Easy to put together and use.
The Bad
- Cutting may be harder if the laser doesn’t have enough power.
- Not much room to work
130W Reci W4 Co2 laser tube engraver and cutter
| Specification | Value |
|---|---|
| Laser Power | 130W |
| Work Area | 1300 x 900 mm |
| Supported Materials | Wood, leather, acrylic, paper, fabric, etc. |
| Connectivity | USB |
| Software Compatibility | CorelDraw, AutoCAD, LaserCAD, etc. |
People who have a lot of space to work in will find that the Reci W4 Co2 laser is the best option. It is a productive tool with an engraving speed of up to 600 millimetres per second (mm/s), despite the fact that it may not be suitable for metals. The impressive working area of the laser cutter measures 13000 mm by 900 mm, making.
It appropriate for the majority of products. Crystals, wood, bamboo, and marble are some of the materials that are suitable for usage with this gadget. In addition to these formats, it is compatible with the CorelDraw and AutoCAD file types.
The Good
- High laser power for cutting that works well
- Large space to work on big projects.
- able to cut many different kinds of materials
The Bad
- Style that is heavy and bulky
WAINLUX JL7 Laser Engraver Cutter 60W
| Specification | Value |
|---|---|
| Laser Power | 7W |
| Work Area | 255 x 440 mm |
| Supported Materials | Wood, leather, acrylic, paper, fabric, etc. |
| Connectivity | Bluetooth, USB |
| Software Compatibility | WAINLUX APP, LightBurn, etc. |
WAINLUX JL7 laser cutter has 60W machine power and 10W output power, 32-bit high-speed MCU motherboard, speed up to 12000mm/min, super cutting penetration and precision, and engraving and cutting speed is 60% faster than normal compressed light spot. It can cut a 10mm basswood board and a 5mm black acrylic.
The JL7 10W laser engraver head uses 0.08*0.05mm ultra-fine compressed light spot technology. This means that the highest processing resolution is 4K, the minimum engraving accuracy is 0.01mm, and the repeat positioning accuracy is 0.02mm. This means that the engraving renderings can be made to look exactly like the real thing.
The Good
- Affordable
- Software that is easy to use and small and light in size
The Bad
- Cutting may be harder if the laser doesn’t have enough power.
- Not much room to work
FAQs
A laser cutter is a machine that uses a high-powered laser beam to cut, carve, or etch a wide range of materials, such as wood, acrylic, metal, and plastic. It is often used for making things and making prototypes.
A: CO2 laser cutters and fibre laser cutters are the two main types of laser cutters. Most of the time, CO2 laser cutters are used to cut and engrave things like wood, plastic, and glass. Metal can be cut and etched with fibre laser tools.
A: Some of the benefits of using a laser cutter are exact and accurate cuts, clean and smooth edges, the ability to cut a wide range of materials, and the ability to make intricate designs and patterns.