Table of Contents
If you want to start correctly in 3D printing, you must be equipped with the right equipment. But you do not necessarily have to go overboard and buy one of those advanced 3D printers that cost more than a thousand dollars. It is possible to get a high-quality 3D printer without spending more than $400. In this guide, we show you the Best 3D Printers Under $400, which you can buy now.
You do not have to spend hours searching through dozens of products on the internet – we already did that for you. To be more precise, our guide includes 3D printers priced between $300 and $400. The incredible development in 3D printers is a fitting example of the rapid growth of technology that has become an integral part of our daily lives. The 3D graphics industry has evolved at an astonishing pace, making the concept easily accessible to the masses.
List of the best 3D printers under $400
If you have been tempted to dive deeper into this amazingly amazing creation of technology with one of the Best 3D Printers Under $400, we strongly recommend you to go with any of the printers mentioned below.
JGAurora A5S
If you are looking for a DIY kit with a large build volume and a sleek design, the A5S 3D printer is a good option to consider. It is manufactured by JGAurora and is an updated version of A3. After considering consumer feedback on previous models, the company came up with AS5 that also has power recovery and 2.3-inch full-color touch screen in addition to a large printing area. The printer operates on FDM technology and has one extruder. You can print a structure with a maximum volume of 305 x 305 x 320 mm.
The layer resolution ranges from 0.1 to 0.3 mm. AS5 prints at a speed of 150 mm per second with a nozzle that has a diameter between 0.4 and 1.75 mm. You can easily connect via a USB port. Overall, this is one of the best 3D printers under $400.
[content-egg module=Amazon template=custom/simple_list next=1]
Anycubic Photon S
Another 3D printer from Anycubic on our list is the Photon S. The company is known for its FDM 3D printers. It came out with a DLP technology-based printer, Photon S, which also attracted a lot of attention and amused many users. It is an updated version of the Photon. It uses powerful UV rays to cure the layers of synthetic resin. The printer has a print area of 4.5 x 2.5 x 6.4 inches with 10W more power and UV matrix. It is compatible with the Photon Slicer software. You can connect it with a USB cable. Overall, this is one of the best 3D printers under $400.
[content-egg module=Amazon template=custom/simple_list next=1]
Monoprice Voxel
Monoprice has built a great reputation among consumers for its reliable 3D printers. One of these is Voxel. It offers a lot to its users. It is similar to FlashForge Finder. It is cube-shaped with a prominent touch screen. It has minimal installation requirements and is easy to use. This makes it more suitable for beginners. The printer has a build volume of 150 x 150 x 150 mm. It uses a nozzle with a diameter of 0.4 mm and prints at a speed of 10 to 100 mm per second. The layer resolution ranges from 0.05 to 0.4 mm. It has a 2.8-inch touch screen for an intuitive user interface. Overall, this is one of the best 3D printers under $400.
[content-egg module=Amazon template=custom/simple_list next=1]
Monoprice Maker Ultimate
Monoprice was known for its high-quality affordable electronic accessories. Then it entered the 3D printer market. The printer looks quite professional with a black anodized metal frame and lives up to all the company’s claims. It is practical and offers the possibility of adding a cover if needed. The printer has a build volume of 200 x 200 x 115 mm with an exceptional speed of 55 mm per second.
The layer resolution is 20 microns and is compatible with Cura, ReplicatorG, Simplify3D, and Repetier Host. All of these softwares are user-friendly. You can connect the printer with an SD card and USB cable. Overall, this is one of the best 3D printers under $400.
[content-egg module=Amazon template=custom/simple_list next=1]
Artillery Sidewinder X1 V4
Artillery launched Sidewinder X1 in 2018. Based on customer reviews, it continues to update and add new features. X1 V4 is its fourth successor. It has a sleek design and a professional look. The printer has a build volume of 300 x 300 x 400 mm with a maximum print speed of 150 mm per second. It offers several advanced features for only $400. Overall, this is one of the best 3D printers under $400.
[content-egg module=Amazon template=custom/simple_list next=1]
What To Expect From Best 3D Printers Under $400
Still, confused about what you’ll get from one of the best 3D printers under $400? Here are three quick reasons why you should consider going for one of the best 3D printers under $400 price range:
- Better all-around quality: 3D printers under $400 have a much better print quality than 3D printers in the $200 range. They have better construction and are less prone to printing errors. They have better built-in interfaces (hello, touchscreens) and have better quality control. Most important (at least for beginners and non-techies), they are supported by a better technical support team. Of course, not all points are correct for all products. But generally, you can expect at least two of the above advantages when you buy one of the best 3D printers under 400 dollars.
- More material flexibility: Cheap 3D printers of less than $300 are usually limited to PLA filaments, and the 3D printers that can process other types of filaments as standard are not very common and reliable. In the range of $300 – 400, you are more likely to use 3D printers with heated print beds, and you can reliably process more than one type of filament.
- More product options: Going to the range of one of the best 3d printers under $400 will give you access to a more comprehensive list of products. It is always good to have more options. Most striking is that you will encounter more fully embedded, fully assembled 3D printers.