Table of Contents
Do you know how to fix ‘Error Splicing File: File too large’ issue? It’s very confusing to get the error message “Error splicing file: file too large” when you’re trying to move a file to a drive that has plenty of space. It’s not about how much space you have on your drive, despite what you might think. Luckily, this annoying error is simple to fix. “Error splicing file: file too large” shows up when you try to move a file to a drive that doesn’t allow files that size. If this error happens, you need to find out what kind of file system the destination drive has.
In real life, this problem is most likely to happen with ext or FAT32 drives. Failure of the disk can also lead to “error splicing file: file too large.” If you get this error even though you are using a good file system, you should check to see if the disk is failing and protect your data as needed. “Error splicing file: Input/output error” is a problem that a lot of Ubuntu users have. This error usually happens when there are problems with either the source or destination disk, the file system, or the hardware. We will look at how to fix ‘Error Splicing File: File too large’ issue in this article.
What causes the “Error Splicing File: File too large” issue?
- File Size Limitations: The file you are trying to handle is larger than the maximum file size supported by your file system or the specific program you are using. Different file systems and software have varying limitations on file size.
- File System Limitations: Some file systems, such as FAT32, have a maximum file size limit (4 GB in the case of FAT32). If you’re trying to copy or move a file that exceeds this limit to a FAT32-formatted drive, you’ll encounter this error.
- Insufficient Disk Space: If your storage drive doesn’t have enough free space to accommodate the file, you may encounter this error.
- Program Limitations: The software or utility you are using to manipulate the file may have its own limitations on file size. For example, certain video editing software or image editors may have restrictions on the size of files they can process.
- Hardware Limitations: In some cases, the hardware you are using to manipulate the file (e.g., an external hard drive or a USB flash drive) may have limitations on the maximum file size it can handle.
How to fix ‘Error Splicing File: File too large’ issue
Check System Requirements
First, make sure that your computer and storage devices can handle large files before you try to fix anything. Check how much space you have on your hard drive and make sure the file you want to change doesn’t go over the file system’s maximum size limits. For example, FAT32 files can’t be bigger than 4GB.
System Requirement | Windows | macOS |
---|---|---|
Operating System | Windows 11, Windows 10, | macOS Monterey (12.x), |
Windows 8.1, Windows 7 | macOS Big Sur (11.x), | |
macOS Catalina (10.15.x), | ||
macOS Mojave (10.14.x) | ||
Processor (CPU) | 1 GHz or faster, | Intel Core i5 or higher |
compatible with 64-bit | (Apple Silicon or Intel) | |
RAM (Memory) | 4 GB or more | 8 GB or more |
Hard Drive Space | 64 GB or more for Windows 11 | 64 GB or more |
32 GB or more for Windows 10 | ||
20 GB or more for Windows 8.1 | ||
Graphics | DirectX 12 compatible | Metal compatible graphics |
Display | 720p (1366×768) or greater | 1280×800 or higher |
Internet Connection | Internet connection | Internet connection |
Additional Requirements | Depending on specific | N/A |
Verify the File Size
Check to see what size file you’re working with it is. To get more information about the file, right-click on it and choose “Get Info” or “Properties” (Windows). Make sure the file size is what you want it to be. If it goes over the system or file system limits, you might need to look at other options, like splitting or compressing the file.
Use a Different File System
On Windows:

- Open the File Explorer.
- Right-click on the drive you want to format.
- Select “Format…“
- Choose the desired file system (e.g., NTFS).
- Follow the on-screen instructions to format the drive.
On macOS:
- Open “Disk Utility” (you can find it in the Utilities folder within the Applications folder).
- Select the drive you want to reformat.
- Click the “Erase” button.
- Choose the desired file system.
- Click “Erase” to format the drive.
Split the File
If you don’t want to or can’t change the file system, you could use a file-splitting tool or a compression utility that supports splitting to break up the big file into smaller pieces that are easier to handle.
Use Cloud Storage or External Storage
If you’re trying to move the file to a different device and get the error, you might want to use a cloud storage service like Google Drive or Dropbox, or an external storage device with enough space for the file.
Update Your Software
Make sure that your software for managing files and operating system are both up to date. Updating your software can sometimes fix compatibility problems that cause errors with file sizes.
Tips for Preventing Future Xbox Controller Driver Errors
- Keep your system up to date: Make sure the software that runs your computer is up to date. Microsoft often sends out updates that include better drivers, which can help keep your computer from having problems with other programs.
- Use Official Drivers: Always use the drivers that Microsoft gives you for your Xbox controller. Do not get drivers from outside sources, as they might be out of date or harmful.
- Update the firmware on your controllers on a regular basis: Every once in a while, Xbox controllers get firmware updates. To update the firmware on your controller, connect it to your Xbox or PC and use the Xbox Accessories app or the settings on your Xbox.
- Check USB Connectivity: Make sure the USB port that your controller is connected to is working right. If you’re not sure if the hardware is broken, try using a different USB port.
- Stay away from USB hubs and extensions: Instead, connect your Xbox controller directly to a USB port on your PC or Xbox whenever you can. Using USB hubs or extensions can sometimes make it hard to connect.
Conclusion
It’s important to know what this error means before we look at how to fix it. The “Error splicing file: Input/output error” message usually shows up when you try to move or copy files between disks or partitions. There seems to be a problem with the read/write operations between the source and the destination based on this error. Here are some things that should help you fix this error: reformatting your disk, checking for disk errors, working with files from the command line, or checking your hardware.
Questions and Answers
If your hard drive is failing and giving you the “Error splicing file” error, you should copy your most important files first and get help from a professional if you need to. You can give your disk the smartctl command to see how healthy it is and get more information about its condition. This is an example:
/dev/sdX smartctl -a
Some users said that the “Error splicing file” error could be avoided by copying files from the command line instead of the file manager. This worked best for small files. The cp command lets you copy files. This is an example:
Copy /path/to/source/file to /path/to/destination/file
Change /path/to/source/file to the path of the file you want to copy and /path/to/destination to the path of the directory you want to copy to.
If you’re getting the “Error splicing file” message because you’re trying to copy files that are bigger than the destination disk’s file size limit, you can change the file system on the destination disk to one that can handle bigger files. If the disk is only being used with Linux systems, you can use either the EXT3 or EXT4 file systems. The disk can be formatted to NTFS if it needs to work with Windows servers.