Fix: ‘Hardware Problems Were Detected’ issue in Windows Memory Diagnostics Tool

If you want to Fix ‘Hardware Problems Were Detected’ issue in Windows Memory Diagnostics Tool? This post can help. This error message basically means that there are issues with a piece of hardware. Microsoft includes a lot of tools in Windows OS to fix different kinds of problems. These tools range from hardware troubleshooters to command prompt-based utilities. The Windows Memory Diagnostic tool is one of these clever tools. It finds and fixes memory-related problems.

People usually use the Windows Memory Diagnostic tool when they think their system memory is failing. When the computer has problems with the RAM, it can also tell PC owners to run the utility. There’s a chance that your Random Access Memory is broken if you run the tool and get the message “Hardware problems were detected…” Still, the problem could be caused by other parts of the system that are affecting the RAM. This article talks about the “Hardware problems were detected” status report from the Windows Memory Diagnostic tool and how to Fix ‘Hardware Problems Were Detected’ issue in Windows Memory Diagnostics Tool.

What is the Windows Memory Diagnostics Tool?

You can test your computer’s random access memory (RAM) with the Windows Memory Diagnostics Tool, which comes with Windows. Memory that holds data that is being used by the CPU at the moment is called RAM. When your RAM isn’t working right, it can make your computer crash, freeze, or have other issues. Windows comes with a memory diagnostic tool that can help you figure out what’s wrong and fix it.

If you get the “Hardware Problems Were Detected” message when you try to run the tool, you won’t be able to use its features. People who use Windows say that the Memory Diagnostics tool finds a problem with a piece of hardware (“Hardware issues were detected”). This error shows up in all recent versions of Windows, and the system usually restarts or freezes randomly after it.

What causes the “Hardware problems were detected” error?

1. A common problem with hardware drivers: If you see this message, it means that a piece of hardware that isn’t necessary is having to run with a driver that isn’t fully compatible. To fix the problem, run the Hardware and Devices Troubleshooter and follow the steps it gives you.
2. Overclocking makes the system unstable: If you recently changed the frequencies and voltages of some of your parts, the Windows Memory Diagnostic tool may notice this and give you an error message to let you know that these parts are likely to overheat. If you want to get rid of the error, try going back to the default frequencies and voltages, or at least turn them down.
3. Corruption of system files: This kind of problem is often caused by corruption of system files that makes it hard to manage memory. It should be possible to fix the problem if it is with the software by doing a repair install or clean install on your Windows installation.
4. Failing RAM stick: This error message is usually the first sign that you need to get a new RAM stick if yours is failing. But before you order one, run a Memtest scan and use HWMonitor to keep an eye on the temperatures to make sure you’re not wild (hopefully not).
5. Different hardware parts that aren’t working right: It turns out that a broken RAM isn’t the only piece of hardware that could cause this error with the Windows Memory Diagnostic tool. What’s wrong could also be with your motherboard or even your power supply unit (PSU). At this point, the best thing to do is to take your PC to a certified technician so that they can do more research.

Fix: ‘Hardware Problems Were Detected’ issue in Windows Memory Diagnostics Tool

Check for Overclocking Issues

1. Hardware problems can happen if you overclock incorrectly. Even though faster RAM can help you get good performance, you should think about what your hardware can and can’t do before making the changes.
2. If you clocked your RAM too fast, try slowing it down to see if the problem goes away. Repeat this process until you find a safe frequency or return it to its original settings.
3. If you don’t know what the default memory frequencies are, you can try to reset the BIOS. Load the BIOS default. This should return the RAM frequencies to the way they were when they were first made.
4. For specific instructions, look at the manual that came with your motherboard.

Clear the CMOS using the Battery Method

1. Take your computer off the grid.
2. If you need to, unplug your computer from the wall.
3. You can press the Power button more than once. It’ll help get rid of any capacitors.
4. Now, flip your computer over and look for the CMOS. It should be on the case or the battery lid.
5. You need to find your CMOS battery.
6. Take the battery out carefully. Be careful not to bend the clip if you find one.
7. Wait a few minutes after taking out the battery.
8. The CMOS battery should now be put back where it belongs.
9. Start up your computer again.

Run Windows Troubleshooter

1. Press the “Start” button.
2. Set things up.
3. Click on Security & Update.
4. Select Fix Issues.
5. Pick out your hardware and devices.
6. Press the button that says “Run the troubleshooter.”
7. As soon as the scan is done, click “Apply this fix.”
8. Restart your computer.

Test Your RAM with MemTest86+

1. Connect a USB flash drive to your screen. Make a copy of any important files on the drive, because they will all be erased during the process.
2. Next, go to the page for memtest86+ and get the most recent version.
3. Pick out your USB drive and run the installer. Make sure that you choose “format.”
4. After you click “Next,” the installer will make a bootable drive.
5. Next, turn off Secure Boot on your Windows computer if you haven’t already.
6. At this point, turn off your computer. You might also need to clear the CMOS on your motherboard to return your BIOS to its original settings. From the BIOS menu, you can also return the BIOS to its original settings.
7. Next, turn on your computer and plug the Memtest86+ bootable USB drive into it.
8. Go to the Boot Menu and pick the USB drive that can start the computer as the boot device. Depending on who made your computer, the hotkey key to get to the Boot Menu may be different. On an HP computer, press F9 to get to the Boot Menu. On a Dell computer, press F12, and so on.
9. Memtest86+ will start the memory integrity check on its own. At least two passes should be made by Memtest86+. The more passes, the better. If there are still no mistakes after several tries, press the Esc key to end the test.

Conclusion

For your convenience, I’ve made a short list of possible culprits and possible solutions for this problem:. Every new version of Windows shows that “Hardware problems were detected” when the memory diagnostics tool is run. This is a pretty common error. Random restarts, computer freezes, and programs that won’t work are all signs of this problem. The name of the problem suggests that it is caused by hardware issues, mistakes, or other issues. If you want to know more information about this issue so you can visit Microsoft Official Website.

Questions and Answers