Table of Contents
This article will show you how to Fix Hyper-V New-VM Error 0x80070003 “File was not found” issue. If you try to make a virtual machine and get the Hyper-V New-VM Error 0x80070003, which often looks like “File was not found,” it can be very frustrating. Most of the time, this problem happens because some important files needed to create the virtual machine are missing or can’t be reached. It’s hard to use Hyper-V well when this error message shows up because it stops the new virtual machine from starting up correctly.
This guide will look at the most common reasons for the 0x80070003 error and give you easy ways to fix it. Just make sure you follow these steps to have a smooth and error-free time with Hyper-V virtualization. This guide will help you fix the problems and get your Hyper-V up and running without any problems if you’ve been frustrated and want to know How Fix Hyper-V New-VM Error 0x80070003 “File was not found” issue.
What is Hyper-V New-VM Error 0x80070003 “File was not found” issue
When you try to make a new virtual machine (VM) and the system can’t find the virtual hard disc (VHD) or configuration file, you’ll see the Hyper-V New-VM Error 0x80070003, which means a file could not be found. The file paths or names used in the command often need to be checked for errors that cause this problem. Make sure that the paths you give in the New-VM cmdlet or Hyper-V Manager are correct and lead to the right spots for the VM configuration and the VHD files that go with it. These should fix the problem. If you want to know more information about this issue visit Microsoft Hyper-V Official Website.

To fix the 0x80070003 error, you must make sure that the files and folders that were mentioned exist and can be reached. By taking this simple step, you can avoid problems and make the virtual machine without getting the mistake. You can get around the File Not Found error and continue creating your virtual machine in Hyper-V without any problems if you pay attention to these details and make sure that your file names are correct.
Causes for Hyper-V New-VM Error 0x80070003 “File was not found” issue
- Incorrect Path: The path given for the virtual machine files may not work or be right.
- Files Not Found: Important files needed to create the virtual machine are lost or can’t be found where they’re supposed to be.
- Problem with Permissions: The person trying to make the virtual machine might not have the right permissions to see or change the files or folders that were given.
- Storage Connectivity Problems: File not found errors can happen if there are problems with the storage where the virtual machine files are meant to be saved.
- Errors with the software or configuration: This could be caused by issues with the Hyper-V software or incorrect settings for the virtual machine.
- Security Software Interference: Antivirus or other security software on the host system could be stopping new virtual machines from being made.
Fix: Hyper-V New-VM Error 0x80070003 “File was not found” issue
Verify System Requirements

- Before troubleshooting, make sure your system meets Hyper-V requirements.
- Verify if your processor supports virtualization technology.
- Ensure virtualization is enabled in BIOS settings.
Update Hyper-V and Windows
- Outdated software can lead to compatibility issues.
- Ensure your Hyper-V installation and Windows operating system are up-to-date.
- Install the latest updates and patches through Windows Update settings.
Review Virtual Machine Configuration
- Open Hyper-V Manager.
- Right-click on the affected virtual machine and select “Settings.”
- Check the configuration settings, especially the paths for virtual hard disks and other resources.
- Ensure that the file paths are correct and point to existing locations.
Validate Path Permissions
- Navigate to the location specified in the virtual machine’s settings.
- Right-click on the folder and select “Properties.”
- Go to the “Security” tab and ensure that the account running Hyper-V has the necessary permissions.
- Grant the required permissions if necessary.
Check Storage Availability
- Ensure sufficient space on the storage device for virtual machine files.
- Verify accessibility and absence of issues with the storage device.
Reinstall Integration Services
- In Hyper-V Manager, right-click on the virtual machine and choose “Insert Integration Services Setup Disk.”
- Open File Explorer within the virtual machine and run the setup from the inserted virtual disk.
- Follow the on-screen instructions to reinstall Integration Services.
Perform a System File Check (SFC)
- Open Command Prompt as an administrator.
- Run the command:
- sfc /scannow
- Allow the scan to complete and follow any prompts to fix corrupted system files.
Specifications Table for Hyper-V
Specification | Detail |
---|---|
Processor | 64-bit with Second Level Address Translation (SLAT) |
CPU Virtualization Support | Intel VT-x or AMD-V |
Minimum RAM | 4 GB (more recommended for optimal performance) |
Storage | NTFS-formatted hard drive with sufficient space |
Network Adapter | At least one (additional for redundancy and advanced features) |
UEFI (for VBS) | 2.3.1c or later |
TPM (for VBS) | v2.0 (optional, but recommended for enhanced security) |
IOMMU (for VBS) | Intel VT-d or AMD-Vi (optional, but recommended for DMA protection) |
Conclusion
To sum up, fixing Hyper-V New-VM Error 0x80070003, which is often connected to the “File was not found” issue, needs a step-by-step process to find and fix the main problem. To get around this problem and successfully create new virtual machines, users must carefully check the paths given, make sure they have the right access, and make sure that important files are present.
Users can get virtualization to work smoothly by following the methods given, such as changing file paths, managing permissions, or reinstalling Hyper-V components. It takes time and a planned approach to deal with these kinds of technology issues so that the Hyper-V environment works well and meets the virtualization needs. By following these steps, users will be able to figure out how to fix the mistake and make the process of making new virtual machines easier and more reliable.
Question and Answer
To find out about problems or updates for your Hyper-V version, go to Microsoft’s official documentation and help forums. Make sure you have the most recent updates and changes installed. They can help fix any problems you may have.
Of course, you could make a virtual machine (VM) with Hyper-V Manager or some other easy-to-use software. This could help you figure out if the issue is just with PowerShell or if it’s a bigger problem with how Hyper-V is set up.
If you’re having trouble with Hyper-V, visit Microsoft’s communities or knowledge base. You can also use the Microsoft group to get help. They have useful knowledge and people who can help you.