How to Fix ‘Network Cable Unplugged Error’ issue in Windows

How to Fix ‘Network Cable Unplugged Error’ issue in Windows: It has been reported by a significant number of Windows customers that they have encountered an error message that reads “Network cable unplugged,” and that this warning has stopped their computer from functioning properly. They are able to view this notice on the desktop or in the status of the network connection, and it is possible that they will see it on occasion.

Error Caused by an Unplugged Network Cable The presence of Windows indicates that your computer is not successfully detecting the ethernet connection. On occasion, users may experience this issue when they upgrade their Windows operating system or install any potential updates. Because your computer is not successfully recognising the Ethernet connection, the error message “Network Cable Unplugged” indicates that the connection is not being detected correctly.

When you upgrade your Windows operating system or install a possible upgrade, you will typically get this issue. Due to the fact that every computer has its own individual configuration, the reasons for this error could be different from one machine to the next. This is indeed a bothersome problem. Neither the Internet nor your local area network (LAN) are able to establish a connection with your computer. In addition, you are probably wondering with apprehension what steps you should take in order to resolve a situation of this nature. Here are the ways how to Fix ‘Network Cable Unplugged Error’ issue in Windows.

Causes of the ‘Network Cable Unplugged Error’ issue in Windows

1. Cable that is loose or disconnected: This is the most common reason. Your computer and the network may not be physically linked. Make sure that the network cable is firmly connected to both the router or switch and the network port on your computer.
2. wire Damage: There’s a chance that the network wire is broken. Check the wire for any cracks, bends, or signs of wear that you can see. If it’s found, you might want to replace the wire.
3. It’s possible that the network port on your computer or router is broken. If the problem seems to be with a certain port, try connecting the wire to a different one.
4. Trouble with the Network connection: Your computer’s network connection might not be working right. You can use the Device Manager to update the drivers for your network device, or you could try installing them again.
5. Features that save power: Some functions that save power might be turning off the network adapter to save power. To make sure the network adapter stays on, change the power control settings in the device manager.
6. Wrong Network Settings: Connectivity issues can be caused by wrong network settings, like IP address conflicts or wrong subnet masks. Check the network settings again, and if necessary, change them.

How to Fix ‘Network Cable Unplugged Error’ issue in Windows

Check Physical Connections

1. Ensure the network cable is firmly plugged into both your computer’s network port and the router or modem.
2. Inspect the cable for any signs of damage or wear. If damaged, replace the cable with a new one.

Update Network Drivers

1. Right-click on the Start button and select “Device Manager.”
2. Locate the “Network adapters” section and expand it.
3. Right-click on your network adapter and choose “Update driver.“
4. Select “Search automatically for updated driver software” and follow the on-screen instructions.

Disable and Enable the Network Adapter

1. Right-click on the network icon in the system tray and select “Open Network & Internet settings.”
2. Click on “Change adapter options.”
3. Right-click on your network connection and choose “Disable.”
4. After a few seconds, right-click again and select “Enable.”

Verify Network Adapter Settings

1. Open the ‘Control Panel’ on your Windows computer.
2. Navigate to ‘Network and Sharing Center‘ and click on ‘Change adapter settings.’
3. Right-click on your active network connection and select ‘Properties.’
4. Ensure that the ‘Internet Protocol Version 4 (TCP/IPv4)’ and ‘Internet Protocol Version 6 (TCP/IPv6)’ options are checked. If not, check them and click ‘OK.’

Update or Roll Back Network Drivers

1. Open the ‘Device Manager’ by right-clicking on the ‘Start‘ button and selecting it from the menu.
2. Expand the ‘Network adapters’ section, right-click on your network adapter, and choose ‘Update driver.’
3. Follow the on-screen instructions to update the driver. If the issue persists, you can also try rolling back the driver to a previous version.

Run Network Troubleshooter

1. Open the ‘Settings‘ menu by pressing ‘Windows + I.’
2. Go to ‘Update & Security’ and select ‘Troubleshoot.’
3. Click on ‘Internet Connections’ and run the troubleshooter

Conclusion

At this point in time, the Internet is definitely one of the most significant components of our digital life. Suppose you were to use your computer without access to the internet. It has been reported that a significant number of users of Windows 10 and Windows 11 are experiencing Network Cable Unplugged issues. This indicates that their computer is unable to identify the Ethernet connection in an appropriate manner, which brings about errors.

Questions and Answers