Table of Contents
If you try to update Windows 11, you might get the ‘Windows Update Error 0xc1900200’. This usually happens on your computer when the update process is almost done and almost all of it has been installed. The most common cause of error code 0xc1900200 is that your PC doesn’t meet the minimum requirements of the latest updates.
Windows 11 and Windows 10 are the most popular versions of Microsoft Windows, and users all over the world have quickly switched to them. The credit goes to the Windows operating system’s wide range of advanced features, which only make using it better. Here, Windows Update becomes more and more important because it keeps a user’s system healthy and up-to-date.
(Solved) ‘Windows Update Error 0xc1900200’ Issue in Windows 11/10

Disconnect All USB Devices
When updating Windows, if you have an external hard drive or other USB device connected to your PC, you may get the update error 0xc1900200. And many users said they had the same problem with a wireless mouse’s USB Bluetooth receiver.
In this case, you should turn off any external USB devices, like a printer or game controller, that you don’t need during the update process. Check if the error 0xc1900200 goes away after you take out all the external USB devices.
Ensure Minimum System Requirements
- Processor: 1 gigahertz (GHz) or faster processor or SoC.
- RAM: 1 gigabyte (GB) for 32-bit or 2 GB for 64-bit.
- Hard disk space: 16 GB for 32-bit OS or 20 GB for 64-bit OS. May 2019 update, the space has been increased to 32 GB.
- Graphics card: Compatible with DirectX 9 or later with WDDM 1.0 driver.
- Display: 800 x 600.
Reset the Windows Update Components
- Press the Windows key and open Command Prompt (Admin).
- In the text field, enter the following commands. Make sure you press Enter after every command:
- net stop wuauserv
- net stop cryptSvc
- net stop bits
- net stop msiserver
- Rename the Catroot2 and SoftwareDistribution folders by typing the following commands and pressing Enter after each command:
- ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
- ren C:\Windows\System32\catroot2 Catroot2.old
- Restart the Cryptographic, MSI Installer, Windows Update Services, and BITS by executing these commands and pressing Enter after each one of them:
- net start wuauserv
- net start cryptSvc
- net start bits
- net start msiserver
- Close the Command Prompt window.
- Restart your Windows computer and check if there are any difference in your machine’s performance or if the error still shows.
Seek Help from Windows 10/11 Experts
If your computer’s hardware is fine, you should check to see if the update error 0xc1900200 Windows 10 is caused by a problem on the inside. Before you can install the latest update on your PC, you need to make sure that your computer meets the minimum requirements set by the update. Follow the steps below to make sure that your PC’s hardware and software meet the update requirements.
Run System File Checker
Launch Command Prompt
- Type cmd in the Windows search box.
- Right click the best match Command Prompt and choose Run as administrator.
Run the SFC command
- Type sfc /scannow in the Command Prompt window and hit Enter. (Note the space between “sfc” and “/”)
- Wait for scanning and repairing process finished.
- Exit Command Prompt.
Run DISM
- Open the Command Prompt as an administrator.
- In the command line, copy-paste these lines one by one and press Enter after each:
- DISM /online /Cleanup-Image / ScanHealth
- DISM /Online /Cleanup-Image /RestoreHealth
- Wait until the procedure ends (it might take up to 10 minutes).
- Restart your PC.
Modifying the Reserved Partition Size
Every system has a certain size reserved partition, and if it’s not big enough, you won’t be able to upgrade to Windows 10. When you can see the mistake. So, you have to make the reserved partition bigger, which you can only do with a third-party partition wizard. There are a lot of well-known free partition wizards that you can use.
You can use the MiniTool Partition Wizard Free or any other well-known programme that does the same thing. Once you’ve installed the partition wizard, you can make a big change to the size of the reserved partition, like going from 400MB to 1GB. You may also need to shrink the other partitions on the hard drive.
Free Up Hard Drive Space
- Click on the Start button
- Go to the All Programs > Accessories > System Tools
- Click on the Disk Cleanup
you can get more help at the Microsoft Support Center.
What’s causing the ‘Update Error 0xc1900200’ Issue
- Minimum requirements: aren’t met, so Windows 10 can’t be put on every setup. If your computer doesn’t have many features, this could be why the installation fails with this error code.
- Glitched WU component: It turns out that a problem with one or more Windows Update components is one of the most common things that will cause this error code to show up. If this is the case, you should be able to fix the problem by clearing the Windows Update cache (either manually or by using the automated agent).
- Insufficient space in the Reserved Partition: Another common cause of this problem is not enough space in the Reserved Partition. The upgrading agent will depend a lot on this partition, and it won’t work if it can’t swap data freely. In this case, you can fix the problem by using a third-party tool to make the System Reserved partition bigger.
FAQ
How do I fix Windows 10 installation error
- Make sure that your device has enough space.
- Run Windows Update a few times.
- Check third-party drivers and download any updates.
- Unplug extra hardware.
- Check Device Manager for errors.
- Remove third-party security software.
- Repair hard-drive errors.
- Do a clean restart into Windows.
How do I get rid of the Windows 10 update error
The Update Troubleshooter can help you fix the problem if you get an error code while downloading and installing Windows updates. Choose Start > Settings > Update & Security > Troubleshoot > Additional troubleshooters.