Fix: Windows update error Code ‘0x800f0801’ Issue

126

You might get an Windows update error Code ‘0x800f0801’ This is one of four possible error codes that all point to the same problem. The other three error codes, 0x800F0906, 0x800F0907, and 0x800F0922, are all about the same thing.

When you get the CBS E NOT APPLICABLE message, it means one of two things: either the update can’t be installed on this machine or the system can’t handle the update. In this article, we’ll talk about how to fix the Windows 11 update error 0x800f0801 with a few simple steps. But first, let’s try to figure out what started this problem in the first place.

Fixed: Windows update error Code ‘0x800f0801’ Issue

Install update in Safe mode

1. Press – Windows key.
2. Type – advanced startup.
3. Hit – Enter.
4. From the right pane of the dedicated settings page, click – Restart now.
5. When the system powers up, select Troubleshoot => Advanced options => Startup Settings in turn.
6. Once in the next window, click – Restart.
7. Press either 5 or f5 key when the PC starts.
8. Doing so will let your system boot Safe Mode with Networking.
9. When the PC starts, check for updates to check whether the issue still persists.

Check the device’s internet connectivity

If your network connection isn’t stable, you’ll never be able to start downloading the update files. Oftentimes it might happen that, you may see the connectivity sign but there is no internet connection. In this case, you will first see the Windows update error code 0x800f0801. So, it’s very important to make sure you have the right connection before you check for updates.

To start getting ready for the update, unplug the device from the Wi-Fi network and plug it back in to make sure it works well. If you have an Ethernet cable, unplug it and plug it back in, and then check for new updates.

Use Windows Update Troubleshooter

Even though many people think it doesn’t work, the Windows Troubleshooter can sometimes fix problems like the CBS E NOT APPLICABLE (0x800f0801 error). Windows has a native set of troubleshooting utilities designed to find and remove existing problems in various segments. You can use it to look for problems with updates and try to fix them right away. Here’s how:

1. Open Settings from the bottom taskbar.
2. Choose System on the left and go to Troubleshoot > Other troubleshooters on the right pane.
3. Then, find Windows Update and click Run next to it.
4. Finish the process following the on-screen instructions and restart your computer.

Enable the .NET Framework

1. Find Control Panel using the search bar next to Start Menu and open it up.
2. Set View by to Small or Big Icons and choose Programs and Features from the list.
3. Once opened, navigate to Turn Windows features on or off on the right pane of the window.
4. If .NET Framework 3.5 (this package includes .NET 2.0 and 3.0) does not have a box next to it enabled, make sure you tick it.
5. You should also do the same with its subcomponents. Just click onto the plus icon next to .NET Framework 3.5 (this package includes .NET 2.0 and 3.0) and select other components as well.
6. Finally, click OK to save changes and wait until your system resotres the missing components, if any.

Re-adjust Date & Time Settings

1. Press – Windows key.
2. Type – control.
3. Opt for Control Panel.
4. Make sure the View by option is set to Category.
5. Click – Clock and Region.
6. From the right pane of the appearing page, hit – Date and Time.
7. Move to Internet Time tab.
8. Click – Change settings.
9. Check the box present alongside Synchronize with an Internet time server.
10. Click – Update now.
11. To save the changes, hit – OK.

Configure your Group Policy

1. Click search icon from the taskbar.
2. Type – gpedit.msc.
3. Hit – Enter.
4. From Local Group Policy Editor window, navigate to => Computer Configuration > Administrative Templates > System.
5. Find the entry labeled Specify settings for optional component installation and component repair.
6. Double-click the same to open related settings.
7. Select the radio button set next to Enabled and then click – OK.

Perform an SFC

1. Click the Start button and navigate to the Search box.
2. Enter cmd.
3. Look for Command Prompt on the search results and right-click on it.
4. Select Run as administrator.
5. Enter the following command: sfc /scannow.
6. Restart your computer.

Manually Check Windows Update

• Launch the Settings menu of your Windows PC.
• Select Windows Update.
• Click Check for Updates.
• If there are available updates, click Install Now.

you can visit Microsoft support center for further help.

FAQ

How do I fix Windows Update not working Windows 11

Make sure that your C drive has enough free space to let you install the latest Windows 11 updates. Make sure the previous updates are installed on the Windows 11 computer by restarting it. Settings > Windows Updates > Check for updates will run Windows updates again.

Why is Windows 11 failing to update

This means that your computer probably doesn’t have enough space to install the upgrade. The disc, partition, or volume you want to work with doesn’t support the operation you chose. Make sure your computer meets the requirements needed to install Windows. The system can’t find the file you told it to look for.

Why is my Windows 11 update stuck at 0 installing

Try to connect to another network. During the update installation process, you need to make sure the PC is connected to the internet in a stable way. Power supply that isn’t stable: This can also cause Windows 11 updates to get stuck. Unplug your PC from the power source and give it a thorough check.

Why can’t i update 0x800f081

When you get the error 0x800f081f, it’s usually because the update needs the. Installing Net Framework 3.5. So, to fix the KB4054517 installation error 0x800f081f, go ahead and install Net Framework 3.5.