Table of Contents
Sometimes many user need to know how to Use IR Extender Cable. With the Infrared Extender cable from Samsung, also called an IR Extender, you can connect your Smart Touch Remote to your cable box or other AV devices that are farther away. With the IR Extender cable, you don’t have to use the cable remote to control your cable box.
Instead, you can use the Smart Touch Remote. you can use the Smart Touch Control. This controller is much better than the standard cable remote because it has a touchpad, voice control, and Edge, which is arguably a better browser than the one that comes with Android.
The best thing about the Smart Touch Control, though, is that you can use it with many different devices, such as your set-top box, Blu-ray players, and many more. The IR Extender works with an IR sensor, which is another great thing about it. This means that the IR signal will always go to the right device outside the computer.
Ways to Use IR Extender Cable
Getting Started with Universal Remote Setup
- Firstly turn on the TV then Press Menu in your remote control to start the Universal Remote Setup.
- And Now you can select system option from the Menu then press Enter key as see in the screenshot
- Anyhow you have to select your Device Manager and press ENTER to get started with Universal Remote setup.
- Now you have to access the Universal Remote Setup option by Pressing ENTER.
Search For Service Provider
You have to use the Samsung TV remote to control the device that is hooked up to the TV. Turn on the connected device and use your smart touch control to choose the “start” option. Then, press the “Enter” key, as shown below:
On the back of the TV is an IR out port. Plug the IR cable into it, place the emitter near the device you want to control, and press OK to continue. Between your TV and other devices, the Extender cable sends out signals.
- Your remote control the IPTV Setup box, satellite when your setup box is connected with satellite and select the Set Top Box to configure with TV and Press Enter.
- Now you have to select the TV search provider then you can control the set top box with your remote control by pressing Enter from your remote. Now you have to insert the name of your service provider.
- Submit your Brand name and select NEXT using your Samsung Smart Touch control then press ENTER.
- Select the TV service provider from the list as available in your TV screen. If your choice is not in the list then you have to click on More TV service providers at the bottom of the list and select the name then press Enter.
Completing Universal Remote Setup
- You have to select the TV port to connect the set top box. After the selection of TV port press Enter for the Set Top box control test.
- Now, press the up and down arrows on your remote to finish setting up. If your TV screen changes, this is a good sign. You can now use Smart Touch control to control your set-top box, so choose YES and press ENTER.
- Now you can turn around, because the “Congratulations” message means that the setup is done. Now you need to choose Exit, press Enter, and then start using your connected device.
FAQ
How does an IR extender cable work?
An IR extender cable is an Infra-Red Eye Extension. Instead of pointing the remote control directly at the TV, you can point it directly at the IR Eye sensor. This gives you a much longer range and more control over the remote’s features.
What is Samsung IR extender cable use for?
With the Infrared Extender cable from Samsung, your Smart Touch Remote can talk to your cable box or other AV devices. In other words, you can use the Smart Touch Remote instead of your cable remote to turn on the cable box and change channels.
How do you use an IR emitter cable?
Self-adhesive tape is used to stick the transmitter end of remote IR emitters directly to the IR window of the source equipment. The transmitter end, on the other hand, can be put anywhere from a few inches to a few feet away from the receiver. For example, it can be hidden on the inside of a stereo cabinet door or shelf.
Where do you put an IR emitter cable?
To use an IR extension cable, plug it into the Fire TV Cube’s IR port on the back. Then, put the devices you want to control and the IR emitter on the same shelf. If you have devices on more than one shelf, put the IR emitter on the shelf that is the lowest.
How do I setup my Samsung IR extender cable?
Turn on the thing you want the remote to connect to. Select Start with the Smart Touch Remote, then press Enter to confirm. Find the device’s emitter and then press the OK button. Now, choose the type of device you want to connect to and click “OK.”