How to Configure ASUS RT-AC68U as a Repeater and Access Point

375

This tip is about the how to Configure ASUS RT-AC68U as a Repeater and Access Point. So read this free guide, How to Configure ASUS RT-AC68U as a Repeater and Access Point step by step. If you have query related to same article you may contact us.

How to Configure ASUS RT-AC68U as a Repeater and Access Point – Guide

Most users have no idea about how to configure repeater mode Asus rt-ac68u. The Asus switch maintains different activity modes to meet different user prerequisites. To verify which activity mode your wireless router is designed with, you should refer to your switch determination on the ASUS website. Likewise, the Asus RT-AC68U comes equipped with wireless router mode, which is the default mode for the router device.

While in Repeater mode, the RT-AC68R wirelessly connects to an existing wireless network to extend its remote inclusion over the wide region. Capabilities such as firewalls, IP sharing and NAT capabilities are impaired in this mode. Asus repeater mode is useful to strengthen the weak transmissions of a current wireless network.

This post will direct you to how to configure the Asus router as a repeater.

How to to configure the Asus RT-AC68U?

well there are several features you would use when defining up your new RT-AC68U. Next tutorial it’s about configuration up the router with basic configuration options.

The Connections

There are three cables you need to connect to your router’s underlying connectivity.

Connect your modem’s Ethernet cable to your Asus router’s WAN port. You can find it via the ringed globe icon just above it. The port is marked in blue for easy identification.

Connect your computer’s Ethernet port to the LAN port. You can use any of the four available LAN ports. The ports are labeled 1,2,3, and 4. They can be identified by their yellow color marking.

Now connect the supplied power cord to the wall socket and the DCIN port of your router. The door is marked in red in our image below.

Once all cables have been connected and you are all set up, press the power button to turn on your Asus RT-AC68U router. Check out the image below marked in blue. This should now complete the connections and configuration. up of the physical components of your router.

The configuration

Once everything is connected, the router will turn on; the next step would be to configure your connection. Here’s how you would do it –

Launch any of your favorite browsers.

Asus configuration should now open automatically.

Otherwise, type the following address into your browser’s address bar.

If prompted to enter the username and password, enter Admin in both fields and click OK.

You should now be taken to the initial setup page. This will provide information about the product and some features that the router offers you.

Click Go on this page.

Change the default administrator username and password according to your preferences. You can leave them as the default, but it’s highly recommended to change the settings so that you don’t shut down up giving other people access to their login credentials.

Change the password and username in the corresponding boxes and click NEXT.

The router will start looking for your connection. You may need to enter some additional details if they are required by your ISP – your Internet Service Provider. Ideally, the router should be able to detect your connection.

Enter the network name (also known as the SSID) and password (this is known as the network key). Enter these details in the corresponding boxes and click on

You should now find the details of the new configuration settings. Review them once and click NEXT.

A login prompt should now appear. Enter the credentials you entered earlier. Note that although we entered the username and password as Admin initially, but if you changed them in the steps above, you will need to enter the new credentials.

The router settings page will open again. Click Log Out and click OK when prompted.

That settles it. You have successfully configured your Asus RT-AC68U for your network.

How to Connect Asus RT-AC68U as access point?

Before continuing to configure up your Asus router as an access point, it would be a good idea to understand what exactly an access point is. Let us know the jargon first.

The hotspot is used as a means of extending your WiFi coverage. This can help you to increase the number of connected devices and users. Creating an access point with your Asus router will require you to use an Ethernet cable for the modem or other router. This will help you transform the wired modem signal into a wireless signal. Having understood the essence of an access point, here is how we will connect the Asus Router to a modem to create an access point.

Connect the WAN port on your Asus RT-AC68U to the LAN port on your parent modem or router. The step will be like the previous one. tutorial. The WAN port is marked in blue for easy detection.

Log in to the administration page as we did in the previous basic connection tutorial.

Go to Administration > Operating Mode.

Choose the option that says Access Point (AP) Mode and click Save.

You should now be taken to a page where you need to enter the IP addresses.

Click on radio SIM button at the top to enter the settings automatically. You can actually enter the details manually, but we prefer auto-detection for easy, error-free setup.

Click on NEXT

Now, the next step lets you get a little creative. Well, we’re just pointing out that you should think of a good name for your network. Enter your preferred network name and password.

Once everything is set up up correctly, click Apply button to save your settings.

How to To define up Asus RT-AC68U as a WiFi repeater?

Again, if you’re new to the world of network setup, the term might be a little confusing for you. What is a WiFi repeater?

The WiFi Repeater is a means of extending WiFi coverage to a specific area. WiFi repeaters connect to an existing WiFi network, amplify the current signal and transmit it further on. You are expected to place the WiFi repeater in an area where the WiFi signal is already strong.

Repeated WiFi can help cover a larger space like a hallway or even include a longer hallway. This can help you to extend your WiFi connectivity coverage over a wider area.

Now that we understand what a WiFi repeater can do to improve your WiFi network performance, let’s take a look how to configure your Asus RT – AC68U router as a WiFi repeater. Note that your main network must already be configured for the Asus router to act as a repeater for it.

Here are the steps involved in the procedure.

Connect your Asus router to your laptop or PC via Ethernet cable. Connect the cable to your router’s LAN port.

Turn on your router.

Log into the router’s administration page as explained above. tutorial for the necessary connectivity and configuration.

Go to the Administration section.

Select the operation mode and then choose the repeater mode radio button.

Click on SAVE

The router will begin searching for available networks.

Once you’ve found the network you’re looking for, choose it from the list.

Enter the password for the selected network and click

You should now be asked to enter IP addresses. We advise that you choose auto-discovery and that IP addresses are auto-populated.

Click NEXT.

Settings up the router as a WiFi repeater may take a while. Wait patiently for the router to assign itself to the WiFi repeater function.

How to to save the router’s default settings?

Of course, you will usually change the settings on your router to whatever you prefer for proper functionality. But what if something goes wrong and you need to revert to the default settings? This is precisely where backup settings would be an added benefit.

Fortunately, the Asus RT -AC68U router comes with a support option up the default settings. Here is How to get back up the default settings on the Asus router –

Go to the Administration section as explained in the previous sections and go to the part that says Restore / Save / Load

Click on the SAVE option and save the settings in the format of a CFG file.

You can upload the file to any of your favorite cloud services so you can retrieve them later when needed.

When you want to restore the configuration in the future, you can use the Restore and recover file option and apply the default settings on your router.

Final note

I hope you like the guide How to Configure ASUS RT-AC68U as a Repeater and Access Point. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.