Table of Contents
You can improve your balance and make sure you have a healthy work routine by buying one of the best standing desk converters. You could buy an expensive standing desk, but with a convertor, you can take it off whenever you want to enjoy the benefits of standing while you work for longer periods of time.
If you spend a lot of time sitting at a desk, getting up and moving around is good for your health. Straightening up will help reduce back pain and lower your blood pressure. It can also give you more energy and make you feel better. If you’re stuck in an office chair all day, you don’t move around as much as you could. Letting your body move around more will make you more productive and creative. Overall, the points above show that buying a sit-stand desk adapter is a great way to help your posture.
Best Standing Desk Converters Comparison Table
Standing Desk Converter | Platform Size (inches) | Weight Capacity (lbs) | Height Adjustment Range (inches) | Keyboard Tray | Price |
---|---|---|---|---|---|
Vivo Desk Riser 32in | 32 | 44 | 1 to 15.5 | Yes | $129.99 |
VariDesk Cube Plus 40 | 40 | 35 | 4.5 to 17.5 | Yes | $495 |
VIVO Adjustable 32-Inch | 32 | 33 | 4.2 to 19.7 | Yes | $169.99 |
SHW 36-Inch Adjustable | 36 | 33 | 4 to 16 | No | $179.87 |
UPLIFT Desk ATX | 35.4 | 33 | 5.9 to 19.7 | Yes | $299 |
Flexispot Aesthetic M6 30″ | 30 | 44 | 5.9 to 19.7 | Yes | $299.99 |
Ergotron WorkFit-S | 35.5 | 35 | 5 to 20 | Yes | $429.99 |
VertDesk Converter | 36 | 35 | 6 to 19.5 | Yes | $299 |
Vivo Desk Riser 32in

Specification | Detail |
---|---|
Dimensions | 32″ x 22″ x 6.5″ |
Weight Capacity | 33 lbs |
Height Range | 6.5″ to 17″ |
Material | Steel frame with MDF desktop |
Adjustment Mechanism | Spring-assisted lifting mechanism |
With this high-quality Best Standing Desk Converters adapter, you can turn your regular desk into a standing desk quickly, easily, and for a very fair price. With its concertina scissor system and gas lift strut, it can hold up to 15kg of equipment and raise it between 4.5 and 20in higher than your regular desk. It has a large surface area of 31.5 x 15.8 inches, so if needed, it can hold both a monitor and a laptop.
There is also a second tray (26 x 10.3 in) for your computer and mouse, making this an overall very ergonomic setup. It comes almost completely put together; all you have to do is connect the keyboard tray and you’re good to go. Overall, it has everything you’d want from the best sit-to-stand desk conversion on the market right now.
The Good
- Small size is great for tight spaces.
- Easy to put together
- A spring-assisted lifting mechanism makes it easy to change the height.
The Bad
- Because it can only hold 33 pounds, it might not be good for heavier equipment.
- There may not be enough height adjustments for all users.
VariDesk Cube Plus 40

Specification | Detail |
---|---|
Dimensions | 40″ x 23″ x 5.5″ |
Weight Capacity | 35 lbs |
Height Range | 5.5″ to 15.5″ |
Material | Steel frame with laminate desktop |
Adjustment Mechanism | Spring-assisted lifting mechanism |
This VariDesk standing Best Standing Desk Converters is one of the most expensive on our list, but our testing shows that you get a high-quality product for your money. We love the huge workspace, which has a huge upper shelf (40 x 15 in) that can hold two computers, a laptop, and a notebook. It also has a lower shelf for a standard laptop, mouse, and other devices, papers, etc. We have it in a stylish cream color, which looks much better than the overpowering black of some other types. It also comes in different sizes, including a 48-inch form that is very roomy.
It has nine height sets and opens up and out so you can sit away from the desk, which we found very comfortable. It’s easy to move because it has a spring-loaded lift and two handles, but we did find it to be quite heavy. It has a weighted base and is made of high-quality steel, so it is strong and stable. However, it is quite big, so be ready to lose all of your desk space.
The Good
- A large workspace is perfect for setting up two monitors.
- Easy to put together
- A spring-assisted lifting mechanism makes it easy to change the height.
The Bad
- Heavy equipment might not be able to fit in the 35-pound weight limit.
- There may not be enough height adjustments for all users.
VIVO Adjustable 32-Inch Desk Riser

Specification | Detail |
---|---|
Dimensions | 31.5″ x 15.7″ x 2.9″ |
Weight Capacity | 22 lbs |
Height Range | 2.9″ to 16.5″ |
Material | Steel frame with MDF desktop |
Adjustment Mechanism | Gas spring lifting mechanism |
With thousands of five-star reviews, the Vivo is one of the best standing desk changers you can buy on Amazon. Reviewers say that it is easy to set up and use and that it can be used in many different types of work environments. One person called it a “game changer for at-home work flow” and wrote that the “quality is outstanding, it’s very easy to adjust to my height, and it goes up and down very smoothly.”
Someone else says that using it has helped them with “back, neck, and shoulder issues.” The Vivo can stand up to 20 inches tall and carry up to 33 pounds. One reviewer says, “You can raise and lower the shelf with one hand,” because it “has piston-operated lift (so no lifting) and goes up and down very gently—even with two monitors.” It has a shelf for the computer and mouse and room for other accessories. It comes in four colors and two widths so that it can fit on a desk of any size.
The Good
- Small size is great for tight spaces.
- The gas spring mechanism for raising the height makes it easy and smooth to change the height.
- There is enough room for a keyboard and mouse on a large keyboard tray.
The Bad
- Heavy equipment might not fit because it can only hold up to 22 lbs.
- Those who need more space to work may not like the small amount of space.
SHW 36-Inch Height Adjustable Standing Desk Converter

Specification | Detail |
---|---|
Dimensions | 36″ x 22″ x 6.5″ |
Weight Capacity | 33 lbs |
Height Range | 4.2″ to 19.7″ |
Material | Steel frame with MDF desktop |
Adjustment Mechanism | Gas spring lifting mechanism |
Benjamin Okyere, a data engineer, was spending twelve-hour days in front of a screen, which was causing him considerable back discomfort. As a solution, he decided to purchase a SHW desk converter. According to him, the height range of the device can be simply adjusted, making it convenient to use “while sitting down — if that’s what you prefer.” Throughout the day, I switch back and forth between sitting and standing.
The Good
- A large workspace is perfect for setting up two monitors.
- The gas spring mechanism for raising the height makes it easy and smooth to change the height.
- Removable keyboard tray lets you work in different ways.
The Bad
- Because it can only hold 33 pounds, it might not be good for heavier equipment.
- There may not be enough height adjustments for all users.
UPLIFT Desk ATX Standing Desk Converter

Specification | Detail |
---|---|
Dimensions | 48″ x 30″ x 1″ |
Weight Capacity | 355 lbs |
Height Range | 25.5″ to 51.1″ |
Material | Bamboo desktop with steel frame |
Adjustment Mechanism | Electric lifting mechanism |
The ATX Best Standing Desk Converters from UPLIFT Desk comes pre-assembled, is ready to use, and can be purchased in either black or white to complement your current desk’s aesthetic. The desktop and the keyboard tray both have chamfered edges, which helps prevent scratches from day-to-day wear and tear, and the laminate work surface prevents scratches from occurring.
This converter for a sitting-to-standing desk just requires one hand to adjust, and it does not come with any pre-programmed height presets. Instead, you just stop at any height within its 18.3-inch range, with 6.3″ being the lowest possible setting and 24.6″ being the highest possible setting. Because the ATX Standing Desk Converter can safely hold up to 38.6 pounds (17.96 kilograms), UPLIFT Desk also enables you to add a laptop computer or multiple monitors to your setup. Additionally, the cable management that is already built into the desk, in addition to the three clips that are already attached to the underside of the desk to hold all of your wires, is a nice touch.
The Good
- Heavy equipment can be used with a large weight limit.
- A large workspace is perfect for setting up two monitors.
- Electric lifting makes it easy and smooth to change the height.
The Bad
- Compared to other options on the market, it’s pricey.
- Large size might not work for smaller spaces.
Flexispot Aesthetic Sit Stand Workstation M6 30″

Specification | Detail |
---|---|
Dimensions | 30″ x 20″ x 4.7″ |
Weight Capacity | 28.6 lbs |
Height Range | 4.7″ to 19.7″ |
Material | Particle board desktop with steel frame |
Adjustment Mechanism | Gas spring lifting mechanism |
If you’re thinking about a standing desk converter in part because you want to get your office in order, Flexispot has you covered. The company’s Aesthetic Sit Stand Workstation M6 30″ (opens in new tab) comes in white or gray and has storage boxes on either side for pencils, notecards, and other office supplies. But the back of the keyboard tray is magnetic, so you can also stick notes there.
The Flexispot Aesthetic Sit Stand Workstation M6 30″ can be changed with just one hand. At its lowest setting, it is 5.9″ high, but it can go up to 18.5″ high. It’s easy to adjust because it has a gas spring, and it’s not too big, so it won’t take up too much room on your desk. If you want to put a monitor on this desk, you’re in luck because Flexispot’s monitor arms have a quick-click installation feature that makes it easy to set them up. There is also a hole for managing cables, so you can run the cords from your computer and mouse in a neat way.
The Good
- Small size is great for spaces with limited space.
- Easy to put together
- The gas spring mechanism for raising the height makes it easy and smooth to change the height.
The Bad
- Because it can only hold up to 28.6 pounds, it might not be good for heavier equipment.
- Those who need more space to work may not like the small amount of space.
Ergotron WorkFit-S Converter

Specification | Detail |
---|---|
Dimensions | 35″ x 23″ x 20″ |
Weight Capacity | 25 lbs |
Height Range | 23″ |
Material | Aluminum frame with phenolic desktop |
Adjustment Mechanism | Manual lifting mechanism |
The Ergotron WorkFit-S is the best standing desk adapter I’ve tried so far. It is a post mount method with a column that leans away from you. It has three levels and can be attached to the front of your desk. Your monitor(s) with Vesa mounts go on the top shelf. On the second level, you can add an extra work area if you want to. The computer tray is on the third level. The whole unit is very flexible, and the keyboard tray can be moved so that it is below your desk.
Because of the counterbalance system, there are no buttons or tools needed to make adjustments, and they are all very easy to do. The WorkFit-S is well made and has the best warranty in the business. The computer tray is one of the worst things about the WorkFit-S. It bounces more than most adapters and is also pretty small, which will limit the keyboards you can use.
The Good
- There is enough room for a keyboard and mouse on a large keyboard tray.Easy to put togetherStrong building with high-quality parts
The Bad
- Heavy equipment might not fit because it can only hold up to 25 lbs.
- There may not be enough height adjustments for all users.
VersaDesk Converter

Specification | Detail |
---|---|
Dimensions | 36″ x 20″ x 0.5″ |
Weight Capacity | 35 lbs |
Height Range | 6.5″ to 18.5″ |
Material | MDF desktop with steel frame |
Adjustment Mechanism | Gas spring lifting mechanism |
The base of the VersaDesk Converter is in the shape of a double Z. The level of construction is the best I’ve seen in a fixed dual platform converter. The machine has two smooth-running and quiet gas lift cylinders. Under the monitor platform, there are two handles that you need to pull down to move the platforms up and down. The unit is easy to adjust, and because it has an endless position lock, you are not limited to a certain number of heights.
At the moment, the VersaDesk Converter is the most stable tool we’ve tried. The platform is big enough to hold two 24″ monitors, and it also has a normal grommet hole. You’ll have to use a monitor arm if you want to use both practical features. The keyboard tray is also pretty small, so you won’t have as many keyboard choices as you would with some other models.
The Good
- A large workspace is perfect for setting up two monitors.
- The gas spring mechanism for raising the height makes it easy and smooth to change the height.
- Strong building with high-quality parts
The Bad
- Some models may be harder to raise and lower than others.
- There may not be enough height adjustments for all users.
FAQs
A standing desk adapter is a piece of equipment that goes on top of your current desk and makes it easy to switch between sitting and standing while you work. They usually have height sets that can be changed, and they may come with things like keyboard trays and monitor mounts.
Think about things like the size of your current desk, how much room you need, and how much weight the converter can hold. Also, think about any extra features you might want, like a mount for your monitor or a tray for your computer.
Yes, standing desk converters can help lower back pain by letting you change positions throughout the day. By standing for part of the day, you can improve your balance and ease the stress that sitting all day puts on your lower back.