Table of Contents
Fix “The remote device or resource won’t accept the connection” issue: If you are having problems connecting to the internet, you can try running the built-in network troubleshooter that comes with Windows. If you do this, you may see an error message that reads, “The remote device or resource won’t accept the connection.” There are many possible causes for this error, the majority of which are associated with the configuration of your network. Have you recently tried to access a website while you were browsing, but suddenly received an error message stating that “the remote device or resource won’t accept the connection”? We are aware of how frustrating it is.
This problem has recently become quite widespread, particularly among users of Windows 11/10 operating system. There is a possibility that you have come across an error or a bug in your browser that displays the message “The remote device or resource won’t accept the connection.” In most cases, you will encounter this error if the network settings on your computer are incorrectly configured. There is a possibility that you have the proxy gate enabled, or that you have incorrectly configured the Internet Explorer settings. Both of these possibilities are possible. Because the error message does not specify what needs to be Fix “The remote device or resource won’t accept the connection” issue, you will need to rely on a variety of tried-and-true solutions in order to work around the problem.
What is the “The remote device or resource won’t accept the connection” error?
There are a number of potential reasons why you are unable to access the internet on any browser, ranging from incorrect network configurations to enabled proxy settings. One of these may be the case. If you are attempting to connect to the internet but are unable to do so and instead receive the error “the remote device won’t accept the connection,” you can fix the issue by attempting to connect to the internet using one of the recommended solutions listed below.
If you have improperly configured your network settings, there is a good chance that you will run into this error. This error could also occur if your antivirus software prevents certain essential browser functions from working properly, which would result in connection problems. The fact that the error can occur when using any web browser is the most frustrating aspect.
Causes of the “The remote device or resource won’t accept the connection” error?
- Network Issues: Problems with your internet connection or network configuration can lead to this error. It could be due to a weak Wi-Fi signal, network congestion, or a misconfigured network.
- Firewall or Antivirus Software: Security software such as firewalls or antivirus programs might block certain connections, leading to this error. They could perceive the remote device or resource as a threat.
- Third-Party Software Interference: Other third-party software running on your computer may interfere with network connections, causing conflicts that result in this error.
- Proxy Settings: Incorrect or misconfigured proxy settings can prevent your system from connecting to the remote device or resource.
- DNS Issues: Domain Name System (DNS) problems, such as incorrect DNS settings or DNS server issues, can hinder your ability to access remote resources.
- Browser Settings: Browser settings, including proxy configurations or browser extensions, can sometimes trigger this error.
Fixed: “The remote device or resource won’t accept the connection” issue
Reset Your IP Address

- To open Windows Search, press the Win key and the S key simultaneously. Simply type cmd into the search bar, and when the Command Prompt result appears, right-click it and select the option to “Run as administrator.”
- In the Command Prompt window, type the following command, and then press the Enter key:
- the ipconfig/release command
- The next step is to press Enter after typing the following command: ipconfig/renew.
- After you have finished executing the commands, you should check to see if the error still exists to the extent.
Disable the antivirus software temporarily
- Since the error message “The remote device or resource won’t accept the connection” can be caused by interference from a third-party program, it is possible that you will need to temporarily disable the program and then check to see if the problem still exists after you have done so.
- If this solves the issue, you should get in touch with the developers of the software and inquire for guidance.
- Alternatively, you could try installing a different anti-malware tool that might not display the error on the screen.
Turn Off the Proxy Server
- To open the Windows Run dialog box, press the Win key and the R key simultaneously.
- To open Internet Properties, click the Run button on your computer’s toolbar, then type inetcpl.cpl into the box that appears. Then press the Enter key on your keyboard.
- Click on the Connections tab, and then on the LAN settings button located toward the bottom of the window that appears.
- Uncheck the box labeled “Use a proxy server for your local area network” located in the section titled “Proxy server.”
- To exit LAN Settings, select the OK button.
- When you are finished making changes to the Internet Properties, click the OK button to close the window.
- Verify that the internet connection on your computer is operating normally again by checking its status.
Reset Your Chrome Web Browser
- Launch Chrome and select the menu item with the three dots in the upper-right-hand corner.
- To change the settings, select Settings from the menu.
- Choose Reset settings from the menu on the left, and then on the right, select Reset settings to their original defaults to apply the changes.
- Confirm that you want to reset Chrome by clicking on the Reset settings button that appears in the pop-up window.
Conclusion
The Internet has, in recent times, emerged as an indispensable component of our everyday lives; consequently, the loss of even a momentary connection can have severe repercussions. When this occurs, users are instructed to run the troubleshooter, which displays the message “The remote device or resource will not accept the connection.” The most unfortunate aspect is that all browsers are impacted by this error, and when you move the cursor over the error message, it displays the word wpad. If you want to know more information about this issue so you can visit Microsoft Official Website.
Questions and Answers
The error message “The remote device won’t accept the connection” may appear on your personal computer (PC) if the firewall contains a rule that prevents certain connections from being made. In this scenario, the best course of action is to temporarily disable the firewall and check to see if the issue is resolved. At any time that you choose, you can bring the firewall back online.
You can clear any error states by restarting your computer or mobile device, as well as your printer and router. Your computer or mobile device needs to be disconnected from the network name (SSID) first, and then it needs to be reconnected to the same network name that your printer is connected to. The problem will no longer exist if the printer in question can be accessed and is in a ready state.
Connect the cable to both the USB port on your printer and the one on your computer. The direct linking should cause your computer to recognize the printer and begin the process of installing the software that is required to finish the setup. In the event that your computer continues to be unresponsive, check to see whether or not you have enabled the automatic installation of devices.