Table of Contents
A wireless standalone virtual reality headset that can create shared online spaces is the Oculus Quest 2. These virtual spaces allow you to move around and interact with the objects inside of them while being joined by others from all over the world. An onboard mobile operating system powered by a potent mobile Snapdragon processor enables you to run apps and games directly from the headset without the use of a gaming console or computer. Only Oculus Quest devices are subject to controller drift. It’s a fairly typical issue that affects numerous controllers from a wide range of console manufacturers.
This problem, also referred to as joystick drift, is common. Cleaning your controller occasionally will usually take care of controller drift. Naturally, cleaning your Oculus Quest controller entails more than just a thorough wipe-down. Every gamer has experienced controller drift at some point, but few situations are as frustrating as when it happens in the middle of a online game. Joysticks that take on a life of their own and seize control from the user are known as controller drift to the uninitiated.
Ways to fix Oculus Quest 2 controller drift
Use the Right Light Levels
Light levels that are too low or high for the Quest’s onboard tracking cameras can cause drift problems. Even in conditions that are technically above the minimum, you may experience tracking problems and controller tracking drifts. This is true even though the quest will alert you when the light levels in the room are too low. The same is true of excessively bright lights, which can make cameras blind. Generally speaking, the Quest should work well in a room where the light is bright enough for you to read a book but not so bright that it bothers you.
Pair the Controllers Again
Your Touch controllers are paired with your headset just like Bluetooth devices are. When you receive a new controller, you must pair it with your headphone because this process is already completed out of the box. If your controller drift is due to a wireless signal issue rather than tracking, unpairing and then repairing your controllers may help. If you haven’t already, download and set up the Quest companion app since pairing is done there. Once that is finished, proceed as follows:
The controller will now be a free agent. It is a good idea to put in a new battery at this point, just to be safe. Next, re-pair the controller to the headset.
Use Hand Tracking in a Pinch
If you didn’t know, you can use your Quest or Quest 2 without your touch controllers. You can use your bare hands with the hand-tracking feature provided that your headset has been updated to at least the firmware version that supports it. Put on your headset and raise your hands in the air without activating your touch controllers. You will be able to navigate all of the Quest’s menus and turn on hand-tracking as a result. This feature is supported by some multiplayer games and apps as well, but in this instance, it serves as a convenient alternative to touch controllers for accessing settings.
Take Out or Replace the Batteries
The Touch controllers’ batteries last for weeks or months, which is excellent. However, they eventually need to be replaced. The voltage profile when a battery empties differs from the alkaline batteries the Touch controllers were designed for if you’re using rechargeable lithium AA batteries or another chemistry, like nickel-cadmium. As a result, the battery meter may give an incorrect reading. Replace the batteries with new or fully charged batteries to rule out the possibility that the batteries are the cause of drift or not.
Clean the Tracking Cameras
Cameras on the outside of your Quest track the space around you and determine the relative position of your head in virtual reality. The precise location of the Touch controllers is also monitored by these cameras. Make sure that there is nothing in the way of these camera lenses using a soft microfiber cloth. Cameras that are dirty may perform worse at tracking and cause tracking drift in the controller.
Check the Tracking Frequency
The frequencies at which electricity is produced vary across the globe. Even though you can’t see it with your eyes, if you recorded slow-motion video of the light in your room, you would be able to see it flicker as the AC power cycles. The tracking cameras on the Quest can see this flickering, and it can also be problematic. This is why you need to know the frequency of the electricity your lights use for your quest. If you’ve moved between regions or have any reason to believe that your settings have been altered or reset, double-check that this setting is still accurate.
Move Away From Signal Interference
To communicate with the headset, the Quest Touch Controllers send and receive radio waves wirelessly. They are susceptible to interference, just like any other wireless system. Think about whether there are any significant sources of interference nearby when using the headset. Although the Touch controllers don’t appear to use standard Bluetooth, they almost certainly use the same 2.4 GHz band as Bluetooth and some Wi-Fi bands. The presence of a lot of 2.4 GHz radio traffic in your airspace could theoretically cause interference.
Final Words
You should read this article if your Oculus Quest controller is drifting. We’ll go over how to prevent Oculus Quest stick drift so that you can play your browser games with complete assurance that what you’re doing with the controller is reflected on the screen. You are most likely not the only owner of an Oculus Quest who is experiencing this particular problem, according to a quick Google search. Although it might be annoying, there are steps you can take to lessen it. We hope our article on “How to fix Oculus Quest 2 controller drift” will surely help you to do so. For further information regarding Oculus Quest, you can also visit official website.