How to Get Started With Diskpart

146

This tip is about the how to Get Started With Diskpart. So read this free guide, How to Get Started With Diskpart step by step. If you have query related to same article you may contact us.

How to Get Started With Diskpart – Guide

When an external drive (USB flash drive, SD card or secondary drive) doesn’t work in Windows 10 due to data corruption or other logical issue, DiskPart can help you delete everything correctly and restart with a new partition.

DiskPart is an older command-line program that uses Command Prompt to manage drives, partitions, volumes, and virtual disks. Works better than other Windows 10 utilities like Disk Management and File Explorer Format feature.

let’s show you how to use the DiskPart command-line tool to clean and format a hard drive to fix corrupted data and other issues in this Windows 10 article.

How to Fix Drive Problems with DiskPart on Windows 10

To use DiskPart to fix storage drive issues in Windows 10, follow these steps:

Open Start.

Search for Command Prompt, right-click on the top result and select the Run as administrator option.

Type the following command to run DiskPart and press Enter: diskpart

Type the following command to list all active drives and press Enter: list disk

Type the following command to select the drive you want to wipe and press Enter: select disk DISK-NUMBER

In the command, replace DISK-NUMBER with the number of the drive you want to repair as it appears in the “Disk” column. If you don’t perform this step correctly, you may erase the wrong drive. Proceed carefully.

Type the following command to clean the drive and press Enter: clean

Type the following command to confirm the drive still selected and press Enter: lisk disk

Type the following command to create a new partition and press Enter: create primary partition

Type the following command to select the new primary partition and press Enter: select partition 1

Type the following command to make the partition active and press Enter: active

Type the following command to format the partition using the NTFS file system, set a drive label and press Enter: format fs = FILE-SYSTEM label = DRIVE-LABEL quick

In the command, replace FILE-SYSTEM with the name of the file system you want to use, such as NTFS or FAT32, and replace DRIVE-LABEL with the name of the drive as you want it to appear in File Explorer. The quick option is optional for faster formatting. However, if you are unsure about the condition of the unit, it is best to skip the option. Just remember that depending on the size of your hard drive, formatting can take a long time.

This example formats the drive using the NTFS file system and names the partition “Data”:

format fs = ntfs label = Quick data

Type the following command to assign a letter to make the drive available in File Explorer and press Enter: assign letter = DRIVE-LETTER

In the command, change DRIVE-LETTER to the letter you want the drive to use, which is not assigned to another device.

This example assigns the letter “G”:

assign letter = g

Type the following command to terminate DiskPart and press Enter: exit

Type the following command to close the Command Prompt and press Enter: exit

Final note

I hope you like the guide How to Get Started With Diskpart. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.