Table of Contents

This tip is about the how to Transfer Files to Apple Silicon using Mac Share Mode. So read this free guide, How to Transfer Files to Apple Silicon using Mac Share Mode step by step. If you have query related to same article you may contact us.

How to Transfer Files to Apple Silicon using Mac Share Mode – Guide

Mac Shared Mode is accessible through the boot options of Apple Silicon processor-based Macs and allows the internal drive to be accessed from another Mac, such as an external drive. The underlying technology is based on the SMB protocol over USB or Thunderbolt connections. However, a password is still required to access files on protected drives. Apple has long offered a way to access the startup disk on a Mac as a drive that appears on another directly attached drive. Until recently, this method was known as Target Disk Mode and remains for all Intel Macs. The new Apple Silicon Macs with an M1 processor have Share Disk (sometimes called “Mac Disk Sharing”), which requires an entirely different path. With a Mac M1, more steps are required due to a new security approach that requires more step authentication. This also shares the hard drive as a network volume instead of a directly attached drive. Using the method described below will allow you to easily transfer your files from an old Mac to a new ‌Apple Silicon‌ Mac.

Sharing your disk with another Mac

First, connect the two Macs using a USB, USB-C, or Thunderbolt cable. Now, turn your attention to the source (Apple Silicon) Mac.

Unlike Target Disk Mode which uses its own up flag, Mac share mode is accessed through the recovery partition. To boot into recovery mode on an Apple Silicon Mac, first shut down your Mac. Press and hold the power button and wait until you see “Loading boot options” appears. Then select Options > Continue to boot into recovery mode.

Once macOS loads, you’ll see a few options for launching applications like Disk Utility or for reinstalling macOS. Click Utilities > Share Disk and then choose the drive you would like to share (e.g. “Macintosh HD” for the main internal drive) and click “Start Sharing”.

Now, turn your attention to the Mac you want to copy the data to. Launch a new Finder window and scroll down to the “Locations” section of the sidebar, where you will find the network shortcut. Click on it to see a list of network locations, including the drive you just shared.

Double click on the drive you would like to access. Then select Connect As and choose “Guest”, followed by Connect. You should now have access to the contents of the drive and can copy files back and forth whenever you want.

Final note

I hope you like the guide How to Transfer Files to Apple Silicon using Mac Share Mode. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.

Was this article helpful?

Yes0No0