Table of Contents
This tip is about the how to Fix ‘Mouse Cursor Moving on Its Own’ Issue in Windows 10 PC. So read this free guide, How to Fix ‘Mouse Cursor Moving on Its Own’ Issue in Windows 10 PC. If you have query related to same article you may contact us.
How to Fix ‘Mouse Cursor Moving on Its Own’ Issue in Windows 10 PC – Guide
After upgrading to Windows 10, many users encountered problems with the mouse when it moved by itself. It looks like the mouse is moving on its own and it bounces here and there without you moving it. Most of the time, these movements are vertical or horizontal and almost make your PC unusable, as the mouse is the most important interface device after the keyboard.
In most cases, the computer is likely affected by malware that infects the settings and executes commands in the background, which makes the mouse go crazy. If you’ve already tested your system for malware and the mouse still isn’t responding, go ahead and follow the instructions listed below.
Double check your hardware
Before checking or changing any settings on your laptop or PC, be sure to check all hardware components that may cause this issue. Note the mouse cable, USB ports, or remaining battery charge if you use a wireless mouse.
Check the mouse surface again
If the hardware looks good, check the surface the mouse is resting on. Your desk may have scratches or uneven surfaces. If you use a mouse pad, it may be worn out and provide incorrect information about mouse movement.
Change touch pad settings
If you set the touch pad sensitivity on your laptop too high, the cursor will move at the slightest touch. As such, you should take a look at your sensitivity setting. Here it is how to change the touch pad sensitivity on your laptop:
The change will take place in real time, so you can try various settings until you find one you like.
If you have connected a mouse to Windows 10 laptop and never use the touch pad, you can disable it at the top of the window. Also, if you want Windows 10 to disable the touch pad when you connect a mouse automatically, uncheck Leave touch pad on when a mouse is connected.
It is important to note that the cursor may move by itself because the touch pad may have collected dust. if your laptop it’s a little dirty, you should clean your laptop and see if that solves the problem.
Disconnect other devices
Your problem could be caused by a joystick, graphics tablet, or other input devices connected to your laptop or PC. As some of them can also control the cursor, this can lead to a conflict between them while fighting for power.
You can disconnect all devices and reconnect them one by one to find out which one is causing the problem, or you can temporarily disable them when you don’t need them.
Run the hardware troubleshooter
Although Windows 10 does not have a dedicated mouse troubleshooter, you can use the command prompt to access the hardware troubleshooter.
Here’s How to do it:
Update your mouse drivers
Sometimes a mouse’s drivers get out of date or corrupt over time, and you’ll need to download new drivers to get them working. Bad or faulty drivers can have a negative effect on your hardware, so it’s worth a try.
There are many ways to update your pc’s driver, so be sure to check our guide about how to find and replace outdated Windows drivers for more information.
Final note
I hope you like the guide How to Fix ‘Mouse Cursor Moving on Its Own’ Issue in Windows 10 PC. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.