Table of Contents
This tip is about the how to Fix ‘No Bootable Device Error’ Issue on Windows 10. So read this free guide, How to Fix ‘No Bootable Device Error’ Issue on Windows 10. If you have query related to same article you may contact us.
How to Fix ‘No Bootable Device Error’ Issue on Windows 10 – Guide
What does the message “No boot devices found in Windows 10” mean? While this is not always a serious problem, it can certainly present problems. There are other messages you can also see. “No bootable devices found” is one of them. A bootable device means any piece of hardware that contains or can read the files necessary for a computer to start. A hard disk, floppy drive, CD-ROM drive, DVD drive, and USB flash drive are bootable devices. How do these devices affect Windows 10 and why are you getting these messages?
Remove and reconnect all hardware components
At first, you can completely shut down your computer, remove all hardware devices, and then put them back in correctly. This can help to check if the BIOS did not detect the system hard drive due to lost connection and lead to the “no bootable device” issue. If that doesn’t work for your situation, go to the next method.
Check boot order
An incorrect boot order can cause your computer to boot from an uncountable hard drive, and then the “unbootable device found” will occur. So make sure the system hard drive is first in the boot order.
Reset Primary Partition Active
The partition where the operating system is installed is called the primary partition. It needs to be set to active for an operating system boot success. Therefore, if it is set to inactive by mistake, the “no boot device found” issue will be triggered. Therefore, set it back to active again.
Check the status of the internal hard drive
If the internal hard drive has some disk errors, the “no bootable device found” error may appear during Windows startup. You can check its status by the CHKDSK.exe tool. To do this, you can refer to method 3 to open the command prompt window. Then run the command “chkdsk c: / f / x / r”, which will check drive C for errors (the Windows operating system is usually installed on this drive) and fix them if possible.
Fix boot information (BCD and MBR)
When boot information, including BCD or MBR, is corrupted by virus attack, power outage, or bad sectors, you may get a “no bootable device found” error. You can repair or rebuild this crucial information through command prompt commands. Also, you need to first enter the command prompt window and then execute the commands below in order.
Recover Deleted Boot Partition
If you have deleted the system partition by mistake and the BIOS cannot find the boot drive either, Windows cannot find the boot device either. In this case, you can try AOMEI Partition Assistant Professional. It allows you to create bootable media and recover deleted boot partition without loading up YOU.
Final note
I hope you like the guide How to Fix ‘No Bootable Device Error’ Issue on Windows 10. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.