Table of Contents
This tip is about the how to Give MacBook an iOS-Like Charging Sound effect. So read this free guide, How to Give MacBook an iOS-Like Charging Sound effect. If you have query related to same article you may contact us.
How to Give MacBook an iOS-Like Charging Sound effect – Guide
When you log into a phone or computer, it’s wonderful to get a confirmation. You don’t want to plug in the cable for a few minutes of emergency charging, only to find that the battery level hasn’t increased 20 minutes later. For this reason, the latest MacBook makes a sound when you connect it to the cable. let’s teach you how to mute your MacBook sound or adjust the charging sound.
How to Turn off or turn on the charging sound on your MacBook
If you want to keep your Mac silent when you plug it in, be aware that sound won’t play if your computer is muted. However, you can also turn it off globally if you never want to hear it.
To do this,
patterns write com.apple.PowerChime ChimeOnNoHardware -bool true; killall powerchime
patterns write com.apple.PowerChime ChimeOnAllHardware -bool true; open /System/Library/CoreServices/PowerChime.app &
How to Change the MacBook Charging Sound
If you want to go further, you can customize the sound that plays when you plug in your MacBook. It’s a fun way to customize your device.
However, you should note that you cannot change the Mac loading sound effect unless you disable System Health Protection. Since the sound file that plays when you plug in the loader is located in the /System folder (which macOS locks for your computer’s protection), you cannot rename it by default.
We don’t recommend disabling SIP as this increases your Mac’s vulnerability to threats. However, if you still want to do this, here are the steps (after disabling SIP).
To get started, open the Finder and select Go > Go to Folder (Shift + Cmd + G). Enter the following location to start it:
/System/Library/CoreServices/PowerChime.app
In this folder, right-click the PowerChime item and choose Show Package Contents.
Inside the resulting folder, expand the Content folder and open Resources. Here, there is a file called connect_power.aif.
You must first make a backup of this by copying it to another location on the system or by copying and pasting the file to the same location and adding “.bak” to the final. That way the file isn’t active, but it’s still easily accessible if you want to go back to the old sound.
If you still cannot edit the file after disabling SIP, run the following command in Terminal and try again:
sudo mount -uw / killall Finder
Of course, you will need a sound effect to use for this. Find a suitable sound snippet and then use a website like CloudConvert to convert the file to AIF. You can try simply renaming the file to change its extension (such as from MP3 to AIF), but that might not work correctly.
After preparing the file, rename it to connect_power.aif and move it to the Resources folder so that it replaces the default sound effect. After doing this, restart your Mac or close the PowerChime app in the CPU tab of Activity Monitor (which can also be launched easily in Spotlight). When connecting the charger, you should hear the new sound.
To keep your system secure, be sure to re-enable SIP (using the instructions in guide link above) when you are satisfied with the new sound.
Final note
I hope you like the guide How to Give MacBook an iOS-Like Charging Sound effect. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.