Table of Contents
The Videomic Go II is basically a smaller, lighter, and less complicated form of the NTG. It sounds and looks the same. The metal tube of the naked mic is 15cm long and weighs only 89g. Like the NTG, it clips onto the shockmount that comes with it. This mount successfully dampens vibrations and has channels to guide cables.
Rode includes a foam cover with the Videomic Go II that protects against some wind noise. However, if you’re shooting in windy conditions, you should use the optional fluffy accessory, which costs about $30, to reduce any rumble. Note that the cheaper Videomicro doesn’t have a thick foam cover and comes with a fluffy accessory instead. This makes it easier to use right away in windy conditions, but it can get in the way of some smaller cameras.
Rode VideoMic Go II Specifications
Specification | Detail |
---|---|
Acoustic principle | Line gradient |
Polar pattern | Super-cardioid |
Frequency range | 50Hz to 20kHz |
Sensitivity | -35dBV/Pa |
Output | 3.5mm TRS jack |
Rode VideoMic Go II: Design

The all-metal Rode VideoMic Go II will remind you of other small shotgun mics, like the Rode VideoMic Go and the VideoMic Go Plus, which are its brothers and sisters. If you take off the windscreen, the black cylinders will remind you of the famous VideoMic NTG from Rode.
In some ways, the Rode VideoMic Go II looks like a normal microphone until you look at the back, where it fits into the red shock mount that comes with it. The Rode logo on the foam shield does a great job of reducing wind noise and any plosives that might happen. You can buy this Rode VideoMic Go II from its official website
Rode VideoMic Go II review: Features
When you connect the GO II to a suitable app like RODE Connect, you can use filters and audio effects and access more advanced features.
One of the best things about the VideoMic GO II is that it can also be used as a USB-C mic. This is why I often pack it in my camera bag when we go on trips. We can easily do both on-camera and voice-over work with just one mic.
Rode VideoMic Go II review: Software

The VideoMic Go II from Rode is plug-and-play, but I really like that I can connect it to my phone, tablet, or computer via USB. It just gives me a lot more ways to be creative and gives me access to the supercharged tools in Rode’s app suite, which includes RDE Connect, RDE Central, and RDE Reporter.
Rode calls Rode Central a “handy desktop and mobile companion app” that gives users access to advanced features like a high-pass filter, high-frequency boost, pad, and full control over the input level and headphone output level.
Sound quality
There’s one trick left. When you connect the GO II to a computer via USB, the 3.5mm jack turns into a headphone output. You can use this to check the audio levels as you record. This is the next step for audiophiles who want their movies to have the best sound quality. At the very least, it can tell you if you need to move to a quieter place or reshoot because there is too much noise or speech is hard to understand.
Final Words
The company has done very well with the $99 Rode VideoMic Go II. It’s a high-quality microphone that you can use with your camera, and you can also use it with your smartphone to record talks on the go.
It’s a great all-around microphone because it can record broadcast- and studio-quality audio and can be used with a wide range of devices, like smartphones, tablets, cameras, and computers.
Rode VideoMic Go II review: The good and The bad
The Good
- Sturdy
- Affordable
The Bad
- Looks similar to other mics
FAQS
This shotgun microphone has a built-in shockmount that you can attach straight to your DSLR, mirrorless, or video camera to reduce noise caused by vibrations and handling of the camera.
But with the VideoMic NTG, all of the features require a rechargeable internal battery, while the Videomic GO II doesn’t need a battery.