How to Fix Apple Watch Stuck in Boot Loop

Apple Watch is a smartwatch that you can wear. It lets you do a lot of things, like make phone calls, send text messages, and check your email. The Apple Watch came out on April 24, 2015. For the Apple Watch to work, it needs to be linked to an iPhone 14 or later running iOS 16 or higher and be within 33 feet of it. The watch can connect to an iPhone if both devices are on the same Wi-Fi network or if Bluetooth is used.

With the Apple Watch iPhone app, users can change settings, move apps around, choose which notifications they want, and download new apps right from their iPhone. The interface of the Apple Watch was made to fit the wrist, and you can move around by swiping and tapping. It has a physical dial on the side of the watch called the “Digital Crown” that lets you zoom in, scroll, and enter data. You’ve come to the right place if your Apple Watch keeps turning off and on over and over again. Most of the time, this problem happens after the device has been restarted or reset.

The Apple logo shows up on the screen for a few seconds, and then your watch asks you to pair it with your smartphone. Like iOS, watchOS has had its share of annoying problems. The Apple Watch getting stuck on the Apple logo is probably the most annoying problem that a lot of people have had to deal with at some point or another. The black screen of death makes the watch completely useless, so you have to find a fix as soon as possible. Check out these best ways to fix an Apple Watch that is stuck in the boot loop if you find yourself in this situation.

Ways to Fix Apple Watch Stuck in Boot Loop

Ping the Apple Watch from the Watch App

If a brief communication error between the paired Apple Watch and iPhone interferes with the Apple Watch’s startup process, the user may be unable to start up the device and become stuck on the Apple Logo screen. In this case, pinging the Apple Watch from the paired iPhone’s Watch app might be able to resolve the issue.

1. Activate the Bluetooth settings on the paired iPhone and force restart the Apple Watch (see above).
2. Now, keep an eye on the iPhone’s Bluetooth settings and switch to the My Watch app when it shows that it is connected to the Apple Watch.
3. Then go to the My Watch tab and tap the name of your Apple Watch.
4. Now press the i (info) button and tap “Find My Apple Watch“.
5. Next, log in using your Apple credentials (if requested).
6. Now, in the list of devices, tap your Apple Watch and open Actions.
7. Then tap “Play Sound” and then see if the Apple Watch is forced off the logo screen. In some cases, the user may have to press the “Play Sound” button multiple times

Change Calendar and Time Zone Settings in the iPhone’s Watch App

If the calendar or time zone settings on the Apple Watch and the Watch app on the paired iPhone don’t match, that could also cause the Apple logo to stay still because the app can’t talk to the paired iPhone properly. In this case, the problem might be solved by changing the Calendar and Time Zone Setting in the Watch app.

1. Start the Watch application on your iPhone and go to “General“.
2. Now open “Languages and Regions” and tap on “Calendar“.
3. Then select the Gregorian calendar and force the Apple Watch to restart and see if the problem is resolved.
4. If the problem persists, manually set the time zone to the user’s time zone to see if that resolves the issue.
5. If the problem persists, see if changing the time to something other than Daylight Saving Time in the Watch application
6. resolves the problem; if Watch launches successfully, be sure to remove the infographic face, as it may conflict with Daylight Saving Time.

Force Restart the Apple Watch

A brief bug in the Apple Watch might prevent it from navigating past the Apple logo screen, but forcing a restart of the device might fix the issue. Remember that forcing an Apple Watch to restart while it is updating its OS (a progress bar might appear on the watch screen) could result in the bricking of the device.

1. Press and hold both Apple Watch buttons (side button and digital crown).
2. Now wait 30 seconds and release the buttons to see if the Apple Watch has turned on.
3. If it is not turned on, press and hold both buttons again until the apple logo reappears on the Apple Watch.
4. Then check to see if the problem with the Apple Watch has been resolved.
5. If it does not work, try repeating the above steps (e.g., five times) to see if the problem is resolved.
6. If that does not work, leave the Apple Watch charging for 30 minutes, then repeat the above steps to see if it works properly.
7. If the problem persists, move the paired iPhone closer to the Apple Watch and unlock the iPhone.
8. Now, with the iPhone unlocked, perform a forced restart of the Apple Watch (repeat steps 1-4), and check if the Apple Watch turns on without problems after the restart.

Completely Drain the Apple Watch Battery

If your Apple Watch is stuck in the boot loop, it might not get past the Apple Logo screen, which is what’s causing the problem. In this case, the loop might be broken if the Apple Watch’s battery is completely drained.

1. Perform a forced restart of the Apple Watch and lay the Watch on its side until the Watch’s battery runs out (this may take 1-2 days).
2. Once the battery is drained, keep the Watch charged until it is fully charged, then check to see if the Apple Watch is working properly.

Final Words

So here we conclude our article on how to Fix Apple Watch Stuck in Boot Loop. One of the most annoying things about the Apple Watch is that the company’s logo gets stuck on the screen. This problem seems to affect all models, but older ones like the Series 3 are more likely to have it. If you keep seeing the Apple logo on your Apple watch and it’s making you mad, you can find out how to fix the problem here. Just remember that the ways you’re about to read may or may not help you solve the problem. But many people who have tried them have already fixed the problem. If you know more about Apple Watch, visit official website.