Table of Contents
It must be frustrating when you do not know where to look for the Best 3D Printers Under $5000. We know that shopping for 3D printers is not the easiest task in the world. The market is just full of copycats and products that should never have been invented. Only one wrong turn and you could easily get a worthless 3D printer that is never worth $5000.
We are here to help. In this guide to the best 3D printers under $5000, we show you the only 3D printers that you need to consider seriously. Please note that we set our price minimum to $1000 because we do not want to wander into a cheap area. We have sorted our top choices in the table below to make it easier to choose one. So, let’s have a look at the best 3D printers under $5000 in our comparison table and then we’ll discuss them one-by-one.
Best 3D Printers Under $5000 List
The 3D printers are an amazing invention that turns your imagination projects into reality; you can draw anything you want. In this article, we have mentioned some of the Best 3D Printers Under $5000 that you can buy right now on the market. Since this is not a cheap investment, we recommend you to check every possible detail before you choose one.
Raise3D N2 Plus
If you can afford it, the Raise3D N2 Plus is one of the best 3D printers under $5000. Forget large 3D printers with a maximum allowable building height of 10 inches. Choose a 3D printer that more than doubles that limit. Introducing the Raise3D N2 Plus, the best 3D printer you can get for less than $5000. It is a 3D printer with a huge size that rises towering above other large 3D printers on the market, including the popular MakerBot Replicator Z18 and the second-highest 3D printer in this list, the Robo 3D R2. The N2 Plus is a fully enclosed 3D printer. It is housed in a sturdy aluminum frame with a transparent shade that allows you to quickly check your progress.
Everything is stuck in the housing, without dangerously protruding parts and untidy wires to grab. It is only natural that the N2 Plus has a larger than a normal onboard interface. It has a 7-inch touchscreen interface right next door. It is responsive, easy to navigate and contains simple options that beginners can easily understand. All in all, the design of the N2 Plus is clean, robust, functional and aesthetic. With a dual extruder setup (there is also a single extruder setup available), the N2 Plus is a reliable workhorse that can print non-stop days with consistent results. Overall, this is one of the best 3D printers under 5000 dollars.
Pros:
- Fantastic print quality across the board
- Fully enclosed for temperature consistency
- Easy to set up and requires minimal calibration
- Print resume feature
- Easy-to-use touchscreen interface
- Low noise level while printing
Cons:
- Default software isn’t the most beginner-friendly
[content-egg module=Amazon template=custom/simple_list next=1]
Robo 3D R2
The Robo 3D R2 is one of those 3D printers that can be easily sold for twice the stated price and runs away without being called ‘too expensive’. It is so good. So maybe you want to pick it up before Robo 3D suddenly decides to push up the price because it’s too much of a bargain. Born from a successful Kickstarter campaign, the R2 is a large 3D printer that looks like a miniaturized time machine, straight out of a sci-fi film and is one of the best 3D printers under $5000. It is enclosed on all sides except at the top where the filament comes in from the spool holder at the back.
But even with the uncovered top, the temperature-regulating power of the R2 is still good. The R2 arrives almost assembled, with only a few components that need to be installed. It has a heated building board, which should be good news for anyone who wants to play with ABS. Moreover, the construction plate has excellent adhesion as standard, so you do not have to resort to tricks such as the use of glue or tape. The R2 also has a built-in camera that allows remote monitoring.
The most impressive feature of the R2 is the 5-inch touchscreen interface located at the bottom of the machine. It is not just an interface. It is a one-stop hub that allows you to do a number of things that make 3D printing trouble-free and easy. Most importantly, the touchscreen interface contains a slicing software that allows you to prepare your 3D models without the help of a computer. The built-in slicing software is not exactly the complete package, but it is good enough for basic tasks. Overall, this is one of the best 3D printers under 5000 dollars.
Pros:
- Excellent print quality
- Compatible with third-party filaments
- Generous build size for the prize
- Intuitive touchscreen interface
- Onboard slicer and built-in memory
- Integrated camera for remote monitoring
Cons:
- High noise level
- Not fully enclosed on all sides
LulzBot TAZ 6
If you are a tinkerer, you need a 3D printer with which you can play and how you want. No machine in this price range is more open to tinkering than the LulzBot TAZ 6, one of the most popular and one of the best 3D printers under $5000 out the re. The TAZ 6 is a 3D printer with an open frame that arrives largely assembled. It is not necessary to mount it from the ground up, although it appears to be a DIY 3D printer based on promotional images. It is held together by a sturdy aluminum frame that keeps it stable during printing. It contains a built-in interface, which is located at the top of the power box.
It’s just a simple LCD interface, so do not expect too much of it. Similar to the LulzBot Mini, the TAZ 6 requires minimal tinkering during the initial setup process. Bed leveling is simple and the installation of the software is quick and easy. It takes about an hour to get it out of the box, install the detached parts, go through the initial configuration and load the starting filament. If you have previous experience with 3D printers, especially DIY 3D printers, setting the TAZ 6 would only take about 30 minutes.
One of the main reasons why the TAZ 6 is so easy to set up is the manual provided. It is one of the most complete and detailed manuals that we have ever seen in this price range. It is possible to go through the first installation without watching help videos on YouTube, and that really says something. If you manage to use your TAZ 6, everything should be a walk in the park. It is easy to use and includes a user-friendly Cura software that allows you to print your first 3D model in just a few minutes. Overall, this is one of the best 3D printers under 5000 dollars.
Pros:
- Quick and easy initial setup
- Detailed instruction manual
- User-friendly default software
- Superb print quality
- Large build size
- Low noise level for an open-framed 3D printer
Cons:
- No enclosure
- Rudimentary built-in interface
- Not Wi-Fi compatible
[content-egg module=Amazon template=custom/simple_list next=1]
MakerGear M2e
Not impressed with the LulzBot TAZ 6? If you want the second-best open-frame 3D printer in this price range, you do not have to look any further than the MakerGear M2e. It is almost in all ways comparable to the TAZ 6, with only a few differences that prevent our choice from being the best price. Just like the TAZ 6, the M2e comes largely assembled. It is also easy to set up, with an initial configuration of only about 30 minutes, perhaps less for veterans who perform 3D printing. It has everything you need in one of the best 3D printers under $5000.
The print quality of the M2e is comparable to the TAZ 6s. It is polished, accurate and detailed. If you buy both and print the same items in exactly the same settings and the same material, you probably can not say which one is. The M2e is also equipped with a heated construction plate and is perfectly capable of working with different filament types, including ABS, Flexible and PETG. Now let’s talk about what makes the M2e different from the TAZ 6. If you pay attention to the comparison table above, the first thing you’ll notice is that the MakerGear M2e has a smaller building volume than the TAZ 6.
It’s even bigger than many other 3D printers in this class, so it is not exactly in the category of mini-3D printers. The smaller construction plate of the M2e is the main reason why we decided in favor of the TAZ 6. The M2e is noisier than the TAZ 6. It is not deafeningly noisy. It is only that the moving parts give out more pronounced mechanical sounds, which can annoy you if you have the M2e on your desk. Overall, this is one of the best 3D printers under 5000 dollars.
Pros:
- Fantastic print quality
- Easy to set up
- Sturdy and stable construction
- Easy to calibrate
- Excellent after-sales support
- Open-source hardware and software
Cons:
- Non-enclosed
- Noisy
- Instruction manual could be improved
[content-egg module=Amazon template=custom/simple_list next=1]
MakerBot Replicator Plus
MakerBot is one of the most recognizable brands in the industry. Many 3D printers are cloning from MakerBot’s products, and the Replicator Plus is just the newest that will surely deliver countless copycats in the future. The Replicator Plus is a 3D printer with an open frame that is housed in a glossy housing and is one of the best 3D printers under $5000. It has that unmistakable high-end look that screams about: “I am expensive!” It contains a camera onboard on one of the pillars and a nice built-in coil holder on the back. It has a full-color LCD interface, which at first seems really cool until you realize that it is operated with a button.
In terms of design, the Replicator Plus has the same professional look as other MakerBot 3D printers. It is a robust machine that looks good on any desk, although we do not recommend placing it in your room or office, because it can be very loud and annoying. The Replicator Plus is designed to enable problem-free and easy 3D printing, especially for beginners. It usually comes assembled. Connecting all disconnected parts takes only a few minutes. The first installation is even easier.
It installs itself via the MakerBot app on your smartphone, which you must of course first download, along with the MakerBot printing software. After the Replicator Plus is set up, the next thing you should do is view MakerBot Print, the own printing software from MakerBot. It is user-friendly software with simple and clear options. Unless you have serious problems with program navigation, you should understand MakerBot Print without any problems. Overall, this is one of the best 3D printers under 5000 dollars.
Pros:
- User-friendly software
- Onboard camera for remote monitoring
- Large build plate
- Prints faster than predecessor
- Filament jam detection and auto-pause
- Filament run-out notifications
Cons:
- No heated build plate
- Built-in spool holder not compatible with third-party spools
- Needs MakerBot filaments for best results
[content-egg module=Amazon template=custom/simple_list next=1]