Fix ‘0x800f0801 Update error code in Windows 11’ Issue

124

This guide is about Fix ‘0x800f0801 Update error code in Windows 11’ Issue. So read this free guide, Fix ‘0x800f0801 Update error code in Windows 11’ Issue step by step. If you have query related to same article you may contact us.

Fix ‘0x800f0801 Update error code in Windows 11’ Issue – Guide

You may see error 0x800f0801 when checking your Windows 10 computer for updates. This error is CBS_E_NOT_APPLICABLE, which means the update cannot be installed on this computer or the system cannot process the update. Like most other update errors, this error has the same signs, but it is generally okay to download patches in preparation for installation at an early stage of installation.

Surprisingly, installation fails when the progress bar is 60-70%. This can happen when a required file is missing from the system or the installed files are of a higher file version. Sometimes it is also an intermittent download due to an unstable Internet connection.

Fix Windows update error 0x800f0801

Check system file compatibility using SFC scanning

Corruption of system components can become the most notorious issue when installing the latest update on Windows 10. No final, the system will terminate the installation process followed by the display of update error 0x800f0801. If that’s the case, System File Checker is the only tool that eliminates the corrupted components and, at the same time, recovers the missing elements. To run the utility, follow the instructions below –

Press – Windows + R.

In the Run command, type -cmd.

Press – Ctrl + Shift + Enter.

To enable user account control, click – Yes.

When Elevated Command Prompt spins up, enter -sfc / scannow at the base of the blinking cursor.

Hit – Enter.

Wait for the scanning process to complete successfully.

If the found corruption is fixed, close the command prompt and restart the PC.

Or, do what the report says.

Check the device’s Internet connectivity

For obvious reasons, unstable network connectivity will never allow you to start downloading update files. It may often happen that you see the connectivity signal but there is no Internet connection. In such cases, you will find Windows update error 0x800f0801 at the beginning. Therefore, it is an extreme need to check the proper connection before starting to check for updates.

To start preparing for the update, please disconnect your device from the Wi-Fi network and reconnect to ensure the best functionality. In case of Ethernet cable, disconnect / reconnect and check for new updates.

Readjust date and time settings

Incorrectly setting the date and time on the device blocks that install new updates, sometimes even you manage to download these files somehow. Windows Update error 0x800f0801 can occur even when searching for updates also due to invalid time settings. On most Windows 10 devices, the time is automatically adjusted when the Sync option is enabled. However, if you switched to manual, reset the settings and try installing the update.

Press – Windows key.

Type – control.

Opt for the control panel.

Make sure View By is set to Category.

Click on – Clock and region.

In the right pane of the displayed page, click – Date and Time.

Go to the Internet Time tab.

Click – Change Settings.

Check the box next to Synchronize with an Internet time server.

Click – Update Now.

To save the changes, click – OK.

Run DISM check to repair image files

Corruption may occur in Windows image files when saving them on the computer. The most common reasons are power surge or sudden device failure. However, these corrupted files are one of the biggest sources of causing Windows update error 0x800f0801.

To repair these Windows images, the Deployment Image Servicing and Management (DISM) tool is just one option. You can run DISM scan on the system by performing the following steps –

Click – Windows key.

Type -cmd.

When Command Prompt is at the top of the result flyout, click – Run as administrator.

Consent to User Account Control by clicking – Yes.

Enter the following commands on the black panel one after the other and don’t forget to press Enter after each one –

dism / online / cleanup-image / scanhealth

dism / online / cleanup-image / checkhealth

dism / online / cleanup-image / restorehealth

When the scanning process is finished, restart Windows 10.

Make sure you have used Windows Update Troubleshooter

Windows 10 update error is nothing new and has arrived up from time to time, with newer implementations with different codes. Microsoft’s technology team has arrived up with a default troubleshooter in the operating system so that people can easily eliminate problems and thus continue to install update files.

If you encountered error 0x800f0801, make sure to use Windows Update Troubleshooter from Settings application. It is one of the most convenient ways to resolve the error. To proceed with the troubleshooter, follow the guidelines below –

Open Windows Settings.

Click – Update and security.

From the left sidebar of the impending page, choose – Troubleshoot.

Move to the right side.

Click – Additional Troubleshooters.

Choose Windows Update and click – Run the Troubleshooter.

Continue following the onscreen instructions to proceed.

If the utility suggests an automatic resolution, click – Apply this fix.

Configure your Group Policy

Invalid settings in your Group Policy often affect the Windows Update process, which leads to error 0x800f0801. To avoid such issues, configure Group Policy using the steps below –

Click the search icon on the taskbar.

Type -gpedit.msc.

Hit – Enter.

In the Local Group Policy Editor window, navigate to => Computer Configuration> Administrative Templates> System.

Find the entry labeled Specify settings for installing and repairing optional components.

Double click on it to open the related settings.

Select radio button set next to Enabled and click – OK.

Reinstall Microsoft .NET Framework 3.5

One of the most important reasons that calling 0x800f0801 error in Windows 10 will eventually block the installation of update files is an incompatibility in Microsoft .NET Framework 3.5. In search of solving this problem, reinstalling it works effectively. To do this, follow the instructions below –

Press – Windows + S.

Type -appwiz.cpl.

Hit – Enter.

When Programs and Features window appears, click on – Turn Windows features enabled or disabled in the left sidebar.

Select the checkbox similar to .NET Framework 3.5 (includes .NET 2.0 and 3.0).

If another version is available, select that too.

Click OK.

After successfully enabling .Net Framework, try to update your Windows 10 machine.

Temporarily disable Windows Firewall

Windows Firewall provides system security and we do not recommend that it be disabled normally. However, it might misinterpret some update files as malware and block the installation process. This is how users encounter Windows update error 0x800f0801. So disable the feature for now, until the installation goes smoothly.

In Windows Search, type -firewall.cpl.

Hit – Enter.

When the dedicated window changes up, click – Turn Windows Defender Firewall on or off in the left column.

Check the checkboxes set before turning off Windows Defender Firewall (not recommended).

Do the same for private network and public network settings.

To save the changes, click – OK.

Install the update in safe mode

On some devices operated with Windows 10, error 0x800f0801 shows up due to third-party applications and services. In this case, the best way to continue installing updates is to start Windows in Safe Mode.

This is a special type of startup method where Windows leaves out all third-party programs, services, and settings. Windows starts by loading just the basics as well as the default. features and this will help you install the latest patches without any problems. To boot Windows in safe mode, follow the guidelines below –

Press – Windows key.

Type – advanced startup.

Hit – Enter.

In the right pane of the dedicated settings page, click – Restart now.

when the system turns on up, select Troubleshoot => Advanced options => Startup settings instead.

In the next window, click on – Restart.

Press the 5 or f5 key when the PC starts.

This will allow your system to boot into safe mode with networking.

When the PC starts, check for updates to see if the problem still persists.

Final note

I hope you like the guide Fix ‘0x800f0801 Update error code in Windows 11’ Issue. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.